[U-Boot] [PATCH 2/2] arm: zynq: Update boot_targets based on bootmode
Michal Simek
michal.simek at xilinx.com
Mon Jan 28 08:35:51 UTC 2019
From: Siva Durga Prasad Paladugu <siva.durga.paladugu at xilinx.com>
Update boot_targets based on bootmode to run corresponding
distroboot command first.
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu at xilinx.com>
Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---
board/xilinx/zynq/board.c | 29 +++++++++++++++++++++++++++++
1 file changed, 29 insertions(+)
diff --git a/board/xilinx/zynq/board.c b/board/xilinx/zynq/board.c
index f9973840bf20..b4b84df57645 100644
--- a/board/xilinx/zynq/board.c
+++ b/board/xilinx/zynq/board.c
@@ -8,6 +8,7 @@
#include <dm/uclass.h>
#include <fdtdec.h>
#include <fpga.h>
+#include <malloc.h>
#include <mmc.h>
#include <watchdog.h>
#include <wdt.h>
@@ -53,27 +54,55 @@ int board_init(void)
int board_late_init(void)
{
+ int env_targets_len = 0;
+ const char *mode;
+ char *new_targets;
+ char *env_targets;
+
switch ((zynq_slcr_get_boot_mode()) & ZYNQ_BM_MASK) {
case ZYNQ_BM_QSPI:
+ mode = "qspi";
env_set("modeboot", "qspiboot");
break;
case ZYNQ_BM_NAND:
+ mode = "nand";
env_set("modeboot", "nandboot");
break;
case ZYNQ_BM_NOR:
+ mode = "nor";
env_set("modeboot", "norboot");
break;
case ZYNQ_BM_SD:
+ mode = "mmc";
env_set("modeboot", "sdboot");
break;
case ZYNQ_BM_JTAG:
+ mode = "pxe dhcp";
env_set("modeboot", "jtagboot");
break;
default:
+ mode = "";
env_set("modeboot", "");
break;
}
+ /*
+ * One terminating char + one byte for space between mode
+ * and default boot_targets
+ */
+ env_targets = env_get("boot_targets");
+ if (env_targets)
+ env_targets_len = strlen(env_targets);
+
+ new_targets = calloc(1, strlen(mode) + env_targets_len + 2);
+ if (!new_targets)
+ return -ENOMEM;
+
+ sprintf(new_targets, "%s %s", mode,
+ env_targets ? env_targets : "");
+
+ env_set("boot_targets", new_targets);
+
return 0;
}
--
1.9.1
More information about the U-Boot
mailing list