[U-Boot] [PATCH v2 7/7] MSCC: Add sysreset driver for Jaguar2 SOC family

Horatiu Vultur horatiu.vultur at microchip.com
Mon Jan 7 13:02:34 UTC 2019


Create sysreset driver for Jaguar2 SOC family and update defconfig
to use it.

Signed-off-by: Horatiu Vultur <horatiu.vultur at microchip.com>
---
 MAINTAINERS                     |  1 +
 board/mscc/jr2/jr2.c            |  8 +++++++
 configs/mscc_jr2_defconfig      |  2 ++
 drivers/sysreset/Kconfig        |  6 ++++++
 drivers/sysreset/Makefile       |  1 +
 drivers/sysreset/sysreset_jr2.c | 46 +++++++++++++++++++++++++++++++++++++++++
 6 files changed, 64 insertions(+)
 create mode 100644 drivers/sysreset/sysreset_jr2.c

diff --git a/MAINTAINERS b/MAINTAINERS
index d42736b..8b8cc9d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -526,6 +526,7 @@ F:	arch/mips/dts/serval*
 F:	board/mscc/
 F:	configs/mscc*
 F:	drivers/gpio/mscc_sgpio.c
+F:	drivers/sysreset/sysreset_jr2.c
 F:	include/configs/vcoreiii.h
 F:	drivers/pinctrl/mscc/
 
diff --git a/board/mscc/jr2/jr2.c b/board/mscc/jr2/jr2.c
index 36f9896..2935ad0 100644
--- a/board/mscc/jr2/jr2.c
+++ b/board/mscc/jr2/jr2.c
@@ -6,6 +6,7 @@
 #include <common.h>
 #include <asm/io.h>
 #include <led.h>
+#include <dm/lists.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -17,6 +18,8 @@ enum {
 
 int board_early_init_r(void)
 {
+	int ret;
+
 	/* Prepare SPI controller to be used in master mode */
 	writel(0, BASE_CFG + ICPU_SW_MODE);
 	clrsetbits_le32(BASE_CFG + ICPU_GENERAL_CTRL,
@@ -30,6 +33,11 @@ int board_early_init_r(void)
 	if (IS_ENABLED(CONFIG_LED))
 		led_default_state();
 
+	ret = device_bind_driver(gd->dm_root, "jr2_soft_reset",
+				 "reset_soft", NULL);
+	if (ret)
+		printf("Warning: No reset driver: ret=%d\n", ret);
+
 	return 0;
 }
 
diff --git a/configs/mscc_jr2_defconfig b/configs/mscc_jr2_defconfig
index b215754..e80dde6 100644
--- a/configs/mscc_jr2_defconfig
+++ b/configs/mscc_jr2_defconfig
@@ -57,3 +57,5 @@ CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_LZMA=y
 CONFIG_XZ=y
+CONFIG_SYSRESET=y
+CONFIG_SYSRESET_JR2=y
diff --git a/drivers/sysreset/Kconfig b/drivers/sysreset/Kconfig
index 8ce3e2e..7c6db0f 100644
--- a/drivers/sysreset/Kconfig
+++ b/drivers/sysreset/Kconfig
@@ -43,6 +43,12 @@ config SYSRESET_TI_SCI
 	  This enables the system reset driver support over TI System Control
 	  Interface available on some new TI's SoCs.
 
+config SYSRESET_JR2
+	bool "Enable support for Jaguar2 soft reset"
+	depends on SOC_JR2
+	help
+	  This is soft reset on Jaguar2.
+
 endif
 
 config SYSRESET_SYSCON
diff --git a/drivers/sysreset/Makefile b/drivers/sysreset/Makefile
index b3728ac..24c488b 100644
--- a/drivers/sysreset/Makefile
+++ b/drivers/sysreset/Makefile
@@ -16,3 +16,4 @@ obj-$(CONFIG_SYSRESET_SYSCON) += sysreset_syscon.o
 obj-$(CONFIG_SYSRESET_WATCHDOG) += sysreset_watchdog.o
 obj-$(CONFIG_SYSRESET_X86) += sysreset_x86.o
 obj-$(CONFIG_TARGET_XTFPGA) += sysreset_xtfpga.o
+obj-$(CONFIG_SYSRESET_JR2) += sysreset_jr2.o
diff --git a/drivers/sysreset/sysreset_jr2.c b/drivers/sysreset/sysreset_jr2.c
new file mode 100644
index 0000000..76a5bac
--- /dev/null
+++ b/drivers/sysreset/sysreset_jr2.c
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Microsemi SoCs pinctrl driver
+ *
+ * Author: <horatiu.vultur at microchip.com>
+ * License: Dual MIT/GPL
+ * Copyright (c) 2018 Microsemi Corporation
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <sysreset.h>
+#include <linux/err.h>
+#include <asm/io.h>
+
+static int jr2_sysreset_request(struct udevice *dev,
+				enum sysreset_t type)
+{
+	register u32 reg = readl(BASE_CFG + ICPU_GENERAL_CTRL);
+	/* Set owner */
+	reg &= ~ICPU_GENERAL_CTRL_IF_SI_OWNER_M;
+	reg |= ICPU_GENERAL_CTRL_IF_SI_OWNER(1);
+	/* Set boot mode */
+	reg |= ICPU_GENERAL_CTRL_BOOT_MODE_ENA;
+	writel(reg, BASE_CFG + ICPU_GENERAL_CTRL);
+	/* Read back in order to make BOOT mode setting active */
+	reg = readl(BASE_CFG + ICPU_GENERAL_CTRL);
+	/* Reset CPU only - still executing _here_. but from cache */
+	writel(readl(BASE_CFG + ICPU_RESET) |
+	       ICPU_RESET_CORE_RST_CPU_ONLY |
+	       ICPU_RESET_CORE_RST_FORCE,
+	       BASE_CFG + ICPU_RESET);
+
+	return -EINPROGRESS;
+}
+
+static struct sysreset_ops jr2_sysreset = {
+	.request = jr2_sysreset_request,
+};
+
+U_BOOT_DRIVER(sysreset_jr2) = {
+	.id	= UCLASS_SYSRESET,
+	.name	= "jr2_soft_reset",
+	.ops	= &jr2_sysreset,
+};
-- 
2.7.4



More information about the U-Boot mailing list