[U-Boot] [PATCH v4 12/15] drivers: serial_sifive: Skip baudrate config if no input clock
Anup Patel
Anup.Patel at wdc.com
Wed Jan 23 16:49:56 UTC 2019
From: Atish Patra <atish.patra at wdc.com>
It is possible that input clock is not available because clk
device was not available and 'clock-frequency' DT property is
also not available.
In this case, instead of failing we should just skip baudrate
config by returning zero.
Signed-off-by: Atish Patra <atish.patra at wdc.com>
Signed-off-by: Anup Patel <anup.patel at wdc.com>
Reviewed-by: Alexander Graf <agraf at suse.de>
---
drivers/serial/serial_sifive.c | 32 ++++++++++++++++----------------
1 file changed, 16 insertions(+), 16 deletions(-)
diff --git a/drivers/serial/serial_sifive.c b/drivers/serial/serial_sifive.c
index ea4d35d48c..537bc7a975 100644
--- a/drivers/serial/serial_sifive.c
+++ b/drivers/serial/serial_sifive.c
@@ -99,27 +99,27 @@ static int _sifive_serial_getc(struct uart_sifive *regs)
static int sifive_serial_setbrg(struct udevice *dev, int baudrate)
{
- int err;
+ int ret;
struct clk clk;
struct sifive_uart_platdata *platdata = dev_get_platdata(dev);
+ u32 clock = 0;
- err = clk_get_by_index(dev, 0, &clk);
- if (!err) {
- err = clk_get_rate(&clk);
- if (!IS_ERR_VALUE(err))
- platdata->clock = err;
- } else if (err != -ENOENT && err != -ENODEV && err != -ENOSYS) {
+ ret = clk_get_by_index(dev, 0, &clk);
+ if (IS_ERR_VALUE(ret)) {
debug("SiFive UART failed to get clock\n");
- return err;
- }
-
- if (!platdata->clock)
- platdata->clock = dev_read_u32_default(dev, "clock-frequency", 0);
- if (!platdata->clock) {
- debug("SiFive UART clock not defined\n");
- return -EINVAL;
+ ret = dev_read_u32(dev, "clock-frequency", &clock);
+ if (IS_ERR_VALUE(ret)) {
+ debug("SiFive UART clock not defined\n");
+ return 0;
+ }
+ } else {
+ clock = clk_get_rate(&clk);
+ if (IS_ERR_VALUE(clock)) {
+ debug("SiFive UART clock get rate failed\n");
+ return 0;
+ }
}
-
+ platdata->clock = clock;
_sifive_serial_setbrg(platdata->regs, platdata->clock, baudrate);
return 0;
--
2.17.1
More information about the U-Boot
mailing list