[U-Boot] [PATCH v1 3/9] configs: colibri_imx7: enable DM for raw NAND devices

[Stefan Agner]

On 07.01.2019 00:25, Marcel Ziswiler wrote:
> On Sun, 2019-01-06 at 22:00 +0100, Stefan Agner wrote:
>> From: Stefan Agner <stefan.agner at toradex.com>
>>
>> Use DM and device trees for raw NAND devices by default. This
>> fixes -74 NAND read errors since it makes sure the ECC settings
>> are the same as used in Linux and our downstream U-Boot.
>>
>> Signed-off-by: Stefan Agner <stefan.agner at toradex.com>
>> ---
>>
>>  configs/colibri_imx7_defconfig | 3 +++
>>  1 file changed, 3 insertions(+)
>>
>> diff --git a/configs/colibri_imx7_defconfig
>> b/configs/colibri_imx7_defconfig
>> index 7441102ed4..3aaf1a417d 100644
>> --- a/configs/colibri_imx7_defconfig
>> +++ b/configs/colibri_imx7_defconfig
>> @@ -25,6 +25,7 @@ CONFIG_CMD_DFU=y
>>  CONFIG_CMD_GPIO=y
>>  CONFIG_CMD_I2C=y
>>  CONFIG_CMD_MMC=y
>> +CONFIG_CMD_MTD=y
>>  CONFIG_CMD_NAND_TRIMFFS=y
>>  CONFIG_CMD_NAND_TORTURE=y
>>  CONFIG_CMD_USB=y
>> @@ -50,7 +51,9 @@ CONFIG_DFU_MMC=y
>>  CONFIG_DM_GPIO=y
>>  CONFIG_DM_I2C=y
>>  CONFIG_FSL_ESDHC=y
>> +CONFIG_MTD=y
>>  CONFIG_NAND=y
>> +CONFIG_NAND_MXS_DT=y
>>  CONFIG_MTD_UBI_FASTMAP=y
>>  CONFIG_PHYLIB=y
>>  CONFIG_PHY_MICREL=y
> 
> We might want to add the following as well:
> 
> CONFIG_DFU_NAND=y
> 
> Plus I do not understand why we do not use CONFIG_DISTRO_DEFAULTS which would
> include a lot of our now manually picked configuration items.

Hm, good catch. There is CONFIG_DFU_MMC enabled for some reason, seemed
to have slipped in in a Kconfig move. Will fix this.

--
Stefan