[U-Boot] [PATCH 1/3] ARM: zynq: Disable i2c for Zybo/Zybo Z7
Michal Simek
michal.simek at xilinx.com
Tue Jan 22 13:51:49 UTC 2019
There is no i2c connected in base DT that's why disable I2C commands.
Also remove zynq_zybo which is not needed now.
Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---
configs/zynq_zybo_defconfig | 6 ------
configs/zynq_zybo_z7_defconfig | 4 ----
include/configs/zynq_zybo.h | 18 ------------------
3 files changed, 28 deletions(-)
delete mode 100644 include/configs/zynq_zybo.h
diff --git a/configs/zynq_zybo_defconfig b/configs/zynq_zybo_defconfig
index 46b63003b315..9e44e82549f7 100644
--- a/configs/zynq_zybo_defconfig
+++ b/configs/zynq_zybo_defconfig
@@ -1,5 +1,4 @@
CONFIG_ARM=y
-CONFIG_SYS_CONFIG_NAME="zynq_zybo"
CONFIG_ARCH_ZYNQ=y
CONFIG_SYS_TEXT_BASE=0x4000000
CONFIG_SPL=y
@@ -18,7 +17,6 @@ CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_SYS_PROMPT="Zynq> "
CONFIG_CMD_THOR_DOWNLOAD=y
-CONFIG_CMD_EEPROM=y
CONFIG_CMD_DFU=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_FPGA_LOADBP=y
@@ -26,7 +24,6 @@ CONFIG_CMD_FPGA_LOADFS=y
CONFIG_CMD_FPGA_LOADMK=y
CONFIG_CMD_FPGA_LOADP=y
CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
CONFIG_CMD_USB=y
@@ -43,9 +40,6 @@ CONFIG_DFU_RAM=y
CONFIG_FPGA_XILINX=y
CONFIG_FPGA_ZYNQPL=y
CONFIG_DM_GPIO=y
-CONFIG_SYS_I2C_ZYNQ=y
-CONFIG_ZYNQ_I2C0=y
-CONFIG_ZYNQ_I2C1=y
CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0xFA
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ZYNQ=y
diff --git a/configs/zynq_zybo_z7_defconfig b/configs/zynq_zybo_z7_defconfig
index 7985ad6c6363..d729ca340c36 100644
--- a/configs/zynq_zybo_z7_defconfig
+++ b/configs/zynq_zybo_z7_defconfig
@@ -24,7 +24,6 @@ CONFIG_CMD_FPGA_LOADFS=y
CONFIG_CMD_FPGA_LOADMK=y
CONFIG_CMD_FPGA_LOADP=y
CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
CONFIG_CMD_USB=y
@@ -41,9 +40,6 @@ CONFIG_DFU_RAM=y
CONFIG_FPGA_XILINX=y
CONFIG_FPGA_ZYNQPL=y
CONFIG_DM_GPIO=y
-CONFIG_SYS_I2C_ZYNQ=y
-CONFIG_ZYNQ_I2C0=y
-CONFIG_ZYNQ_I2C1=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ZYNQ=y
CONFIG_SPI_FLASH=y
diff --git a/include/configs/zynq_zybo.h b/include/configs/zynq_zybo.h
deleted file mode 100644
index 7d00b412a7e5..000000000000
--- a/include/configs/zynq_zybo.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2012 Xilinx
- * (C) Copyright 2014 Digilent Inc.
- *
- * Configuration for Zynq Development Board - ZYBO
- * See zynq-common.h for Zynq common configs
- */
-
-#ifndef __CONFIG_ZYNQ_ZYBO_H
-#define __CONFIG_ZYNQ_ZYBO_H
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-#define CONFIG_ZYNQ_GEM_EEPROM_ADDR 0x50
-
-#include <configs/zynq-common.h>
-
-#endif /* __CONFIG_ZYNQ_ZYBO_H */
--
1.9.1
More information about the U-Boot
mailing list