[U-Boot] [PATCH 2/3] ARM: zynq: Convert Syzygy and Topic Miami to DM_I2C

[Michal Simek]

Both boards have only controllers enabled that's why move to DM_I2C is
easy.
Add also i2c alias for Syzygy not to be shown as i2c bus -1 because
alias doesn't exist.

Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

 arch/arm/dts/zynq-syzygy-hub.dts  | 1 +
 configs/syzygy_hub_defconfig      | 5 ++---
 configs/topic_miami_defconfig     | 5 ++---
 configs/topic_miamilite_defconfig | 5 ++---
 configs/topic_miamiplus_defconfig | 5 ++---
 5 files changed, 9 insertions(+), 12 deletions(-)

diff --git a/arch/arm/dts/zynq-syzygy-hub.dts b/arch/arm/dts/zynq-syzygy-hub.dts
index a30d667146d1..0f25cbe60923 100644
--- a/arch/arm/dts/zynq-syzygy-hub.dts
+++ b/arch/arm/dts/zynq-syzygy-hub.dts
@@ -16,6 +16,7 @@
 		ethernet0 = &gem0;
 		serial0 = &uart0;
 		mmc0 = &sdhci0;
+		i2c0 = &i2c1;
 	};
 
 	memory at 0 {
diff --git a/configs/syzygy_hub_defconfig b/configs/syzygy_hub_defconfig
index 75139d93b346..793156520021 100644
--- a/configs/syzygy_hub_defconfig
+++ b/configs/syzygy_hub_defconfig
@@ -17,7 +17,6 @@ CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SYS_PROMPT="Zynq> "
-CONFIG_CMD_EEPROM=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_FPGA_LOADBP=y
 CONFIG_CMD_FPGA_LOADFS=y
@@ -36,8 +35,8 @@ CONFIG_SPL_DM_SEQ_ALIAS=y
 CONFIG_FPGA_XILINX=y
 CONFIG_FPGA_ZYNQPL=y
 CONFIG_DM_GPIO=y
-CONFIG_SYS_I2C_ZYNQ=y
-CONFIG_ZYNQ_I2C1=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_CADENCE=y
 CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0xFA
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ZYNQ=y
diff --git a/configs/topic_miami_defconfig b/configs/topic_miami_defconfig
index 70d07ac041ae..927ce9ad2848 100644
--- a/configs/topic_miami_defconfig
+++ b/configs/topic_miami_defconfig
@@ -34,9 +34,8 @@ CONFIG_DFU_RAM=y
 CONFIG_FPGA_XILINX=y
 CONFIG_FPGA_ZYNQPL=y
 CONFIG_DM_GPIO=y
-CONFIG_SYS_I2C_ZYNQ=y
-CONFIG_ZYNQ_I2C0=y
-CONFIG_ZYNQ_I2C1=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_CADENCE=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ZYNQ=y
 CONFIG_SPI_FLASH=y
diff --git a/configs/topic_miamilite_defconfig b/configs/topic_miamilite_defconfig
index 387f4cae0865..e4d52f6a915e 100644
--- a/configs/topic_miamilite_defconfig
+++ b/configs/topic_miamilite_defconfig
@@ -34,9 +34,8 @@ CONFIG_DFU_RAM=y
 CONFIG_FPGA_XILINX=y
 CONFIG_FPGA_ZYNQPL=y
 CONFIG_DM_GPIO=y
-CONFIG_SYS_I2C_ZYNQ=y
-CONFIG_ZYNQ_I2C0=y
-CONFIG_ZYNQ_I2C1=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_CADENCE=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ZYNQ=y
 CONFIG_SPI_FLASH=y
diff --git a/configs/topic_miamiplus_defconfig b/configs/topic_miamiplus_defconfig
index d820fff501d1..f742838d7c1f 100644
--- a/configs/topic_miamiplus_defconfig
+++ b/configs/topic_miamiplus_defconfig
@@ -33,9 +33,8 @@ CONFIG_DFU_RAM=y
 CONFIG_FPGA_XILINX=y
 CONFIG_FPGA_ZYNQPL=y
 CONFIG_DM_GPIO=y
-CONFIG_SYS_I2C_ZYNQ=y
-CONFIG_ZYNQ_I2C0=y
-CONFIG_ZYNQ_I2C1=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_CADENCE=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ZYNQ=y
 CONFIG_SPI_FLASH=y
-- 
1.9.1