[U-Boot] [PATCH v6 1/6] pinctrl: mscc: Add gpio and pinctrl for Jaguar2 SOC family

Horatiu Vultur horatiu.vultur at microchip.com
Fri Jan 11 22:31:15 UTC 2019


The Jaguar2 SOC family has 63 gpio pins therefore I extended mscc-common
to support new numbe of pins and remove any platform dependency from
mscc-common.

Signed-off-by: Horatiu Vultur <horatiu.vultur at microchip.com>
---
 MAINTAINERS                           |   1 +
 drivers/pinctrl/mscc/Kconfig          |   9 +
 drivers/pinctrl/mscc/Makefile         |   1 +
 drivers/pinctrl/mscc/mscc-common.c    |  90 +++++++---
 drivers/pinctrl/mscc/mscc-common.h    |  17 +-
 drivers/pinctrl/mscc/pinctrl-jr2.c    | 323 ++++++++++++++++++++++++++++++++++
 drivers/pinctrl/mscc/pinctrl-luton.c  |  16 +-
 drivers/pinctrl/mscc/pinctrl-ocelot.c |  16 +-
 8 files changed, 444 insertions(+), 29 deletions(-)
 create mode 100644 drivers/pinctrl/mscc/pinctrl-jr2.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 494962e..495d3e5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -525,6 +525,7 @@ F:	board/mscc/
 F:	configs/mscc*
 F:	drivers/gpio/mscc_sgpio.c
 F:	include/configs/vcoreiii.h
+F:	drivers/pinctrl/mscc/
 
 MIPS JZ4780
 M:	Ezequiel Garcia <ezequiel at collabora.com>
diff --git a/drivers/pinctrl/mscc/Kconfig b/drivers/pinctrl/mscc/Kconfig
index cfc6c06..d07ea1b 100644
--- a/drivers/pinctrl/mscc/Kconfig
+++ b/drivers/pinctrl/mscc/Kconfig
@@ -20,3 +20,12 @@ config PINCTRL_MSCC_LUTON
 	help
 	   Support pin multiplexing and pin configuration control on
 	   Microsemi luton SoCs.
+
+config PINCTRL_MSCC_JR2
+	depends on SOC_JR2 && PINCTRL_FULL && OF_CONTROL
+	select PINCTRL_MSCC
+	default y
+	bool "Microsemi jr2 family pin control driver"
+	help
+	    Support pin multiplexing and pin configuration control on
+	    Microsemi jr2 SoCs.
diff --git a/drivers/pinctrl/mscc/Makefile b/drivers/pinctrl/mscc/Makefile
index 6910671..8038d54 100644
--- a/drivers/pinctrl/mscc/Makefile
+++ b/drivers/pinctrl/mscc/Makefile
@@ -3,3 +3,4 @@
 obj-y += mscc-common.o
 obj-$(CONFIG_PINCTRL_MSCC_OCELOT) += pinctrl-ocelot.o
 obj-$(CONFIG_PINCTRL_MSCC_LUTON) += pinctrl-luton.o
+obj-$(CONFIG_PINCTRL_MSCC_JR2) += pinctrl-jr2.o
diff --git a/drivers/pinctrl/mscc/mscc-common.c b/drivers/pinctrl/mscc/mscc-common.c
index d74b8a6..bd3e6ea 100644
--- a/drivers/pinctrl/mscc/mscc-common.c
+++ b/drivers/pinctrl/mscc/mscc-common.c
@@ -22,16 +22,37 @@
 #include <linux/io.h>
 #include "mscc-common.h"
 
-#define MSCC_GPIO_OUT_SET	0x0
-#define MSCC_GPIO_OUT_CLR	0x4
-#define MSCC_GPIO_OUT		0x8
-#define MSCC_GPIO_IN		0xc
-#define MSCC_GPIO_OE		0x10
-#define MSCC_GPIO_INTR		0x14
-#define MSCC_GPIO_INTR_ENA	0x18
-#define MSCC_GPIO_INTR_IDENT	0x1c
-#define MSCC_GPIO_ALT0		0x20
-#define MSCC_GPIO_ALT1		0x24
+static void mscc_writel(unsigned int offset, void *addr)
+{
+	if (offset < 32)
+		writel(BIT(offset), addr);
+	else
+		writel(BIT(offset % 32), addr + 4);
+}
+
+static unsigned int mscc_readl(unsigned int offset, void *addr)
+{
+	if (offset < 32)
+		return readl(addr);
+	else
+		return readl(addr + 4);
+}
+
+static void mscc_setbits(unsigned int offset, void *addr)
+{
+	if (offset < 32)
+		writel(readl(addr) | BIT(offset), addr);
+	else
+		writel(readl(addr + 4) | BIT(offset % 32), addr + 4);
+}
+
+static void mscc_clrbits(unsigned int offset, void *addr)
+{
+	if (offset < 32)
+		writel(readl(addr) & ~BIT(offset), addr);
+	else
+		writel(readl(addr + 4) & ~BIT(offset % 32), addr + 4);
+}
 
 static int mscc_get_functions_count(struct udevice *dev)
 {
@@ -67,7 +88,7 @@ static int mscc_pinmux_set_mux(struct udevice *dev,
 {
 	struct mscc_pinctrl *info = dev_get_priv(dev);
 	struct mscc_pin_caps *pin = info->mscc_pins[pin_selector].drv_data;
-	int f;
+	int f, offset, regoff;
 
 	f = mscc_pin_function_idx(pin_selector, selector, info->mscc_pins);
 	if (f < 0)
@@ -79,15 +100,22 @@ static int mscc_pinmux_set_mux(struct udevice *dev,
 	 * This is racy because both registers can't be updated at the same time
 	 * but it doesn't matter much for now.
 	 */
+	offset = pin->pin;
+	regoff = info->mscc_gpios[MSCC_GPIO_ALT0];
+	if (offset >= 32) {
+		offset = offset % 32;
+		regoff = info->mscc_gpios[MSCC_GPIO_ALT1];
+	}
+
 	if (f & BIT(0))
-		setbits_le32(info->regs + MSCC_GPIO_ALT0, BIT(pin->pin));
+		mscc_setbits(offset, info->regs + regoff);
 	else
-		clrbits_le32(info->regs + MSCC_GPIO_ALT0, BIT(pin->pin));
+		mscc_clrbits(offset, info->regs + regoff);
 
 	if (f & BIT(1))
-		setbits_le32(info->regs + MSCC_GPIO_ALT1, BIT(pin->pin - 1));
+		mscc_setbits(offset, info->regs + regoff + 4);
 	else
-		clrbits_le32(info->regs + MSCC_GPIO_ALT1, BIT(pin->pin - 1));
+		mscc_clrbits(offset, info->regs + regoff + 4);
 
 	return 0;
 }
@@ -120,8 +148,8 @@ static int mscc_create_group_func_map(struct udevice *dev,
 		}
 
 		info->func[f].ngroups = npins;
-		info->func[f].groups = devm_kzalloc(dev, npins *
-						    sizeof(char *), GFP_KERNEL);
+		info->func[f].groups = devm_kzalloc(dev, npins * sizeof(char *),
+						    GFP_KERNEL);
 		if (!info->func[f].groups)
 			return -ENOMEM;
 
@@ -150,9 +178,15 @@ static int mscc_gpio_get(struct udevice *dev, unsigned int offset)
 	struct mscc_pinctrl *info = dev_get_priv(dev->parent);
 	unsigned int val;
 
-	val = readl(info->regs + MSCC_GPIO_IN);
+	if (mscc_readl(offset, info->regs + info->mscc_gpios[MSCC_GPIO_OE]) &
+	    BIT(offset % 32))
+		val = mscc_readl(offset,
+				 info->regs + info->mscc_gpios[MSCC_GPIO_OUT]);
+	else
+		val = mscc_readl(offset,
+				 info->regs + info->mscc_gpios[MSCC_GPIO_IN]);
 
-	return !!(val & BIT(offset));
+	return !!(val & BIT(offset % 32));
 }
 
 static int mscc_gpio_set(struct udevice *dev, unsigned int offset, int value)
@@ -160,9 +194,11 @@ static int mscc_gpio_set(struct udevice *dev, unsigned int offset, int value)
 	struct mscc_pinctrl *info = dev_get_priv(dev->parent);
 
 	if (value)
-		writel(BIT(offset), info->regs + MSCC_GPIO_OUT_SET);
+		mscc_writel(offset,
+			    info->regs + info->mscc_gpios[MSCC_GPIO_OUT_SET]);
 	else
-		writel(BIT(offset), info->regs + MSCC_GPIO_OUT_CLR);
+		mscc_writel(offset,
+			    info->regs + info->mscc_gpios[MSCC_GPIO_OUT_CLR]);
 
 	return 0;
 }
@@ -172,16 +208,16 @@ static int mscc_gpio_get_direction(struct udevice *dev, unsigned int offset)
 	struct mscc_pinctrl *info = dev_get_priv(dev->parent);
 	unsigned int val;
 
-	val = readl(info->regs + MSCC_GPIO_OE);
+	val = mscc_readl(offset, info->regs + info->mscc_gpios[MSCC_GPIO_OE]);
 
-	return (val & BIT(offset)) ? GPIOF_OUTPUT : GPIOF_INPUT;
+	return (val & BIT(offset % 32)) ? GPIOF_OUTPUT : GPIOF_INPUT;
 }
 
 static int mscc_gpio_direction_input(struct udevice *dev, unsigned int offset)
 {
 	struct mscc_pinctrl *info = dev_get_priv(dev->parent);
 
-	clrbits_le32(info->regs + MSCC_GPIO_OE, BIT(offset));
+	mscc_clrbits(offset, info->regs + info->mscc_gpios[MSCC_GPIO_OE]);
 
 	return 0;
 }
@@ -191,7 +227,7 @@ static int mscc_gpio_direction_output(struct udevice *dev,
 {
 	struct mscc_pinctrl *info = dev_get_priv(dev->parent);
 
-	setbits_le32(info->regs + MSCC_GPIO_OE, BIT(offset));
+	mscc_setbits(offset, info->regs + info->mscc_gpios[MSCC_GPIO_OE]);
 
 	return mscc_gpio_set(dev, offset, value);
 }
@@ -215,7 +251,8 @@ const struct pinctrl_ops mscc_pinctrl_ops = {
 
 int mscc_pinctrl_probe(struct udevice *dev, int num_func,
 		       const struct mscc_pin_data *mscc_pins, int num_pins,
-		       char *const *function_names)
+		       char * const *function_names,
+		       const unsigned long *mscc_gpios)
 {
 	struct mscc_pinctrl *priv = dev_get_priv(dev);
 	int ret;
@@ -230,6 +267,7 @@ int mscc_pinctrl_probe(struct udevice *dev, int num_func,
 	priv->mscc_pins = mscc_pins;
 	priv->num_pins = num_pins;
 	priv->function_names = function_names;
+	priv->mscc_gpios = mscc_gpios;
 	ret = mscc_pinctrl_register(dev, priv);
 
 	return ret;
diff --git a/drivers/pinctrl/mscc/mscc-common.h b/drivers/pinctrl/mscc/mscc-common.h
index b0001db..3c5c1fa 100644
--- a/drivers/pinctrl/mscc/mscc-common.h
+++ b/drivers/pinctrl/mscc/mscc-common.h
@@ -9,6 +9,19 @@
 
 #define MSCC_FUNC_PER_PIN	4
 
+enum mscc_regs_gpio {
+	MSCC_GPIO_OUT_SET,
+	MSCC_GPIO_OUT_CLR,
+	MSCC_GPIO_OUT,
+	MSCC_GPIO_IN,
+	MSCC_GPIO_OE,
+	MSCC_GPIO_INTR,
+	MSCC_GPIO_INTR_ENA,
+	MSCC_GPIO_INTR_IDENT,
+	MSCC_GPIO_ALT0,
+	MSCC_GPIO_ALT1,
+};
+
 struct mscc_pin_caps {
 	unsigned int pin;
 	unsigned char functions[MSCC_FUNC_PER_PIN];
@@ -41,11 +54,13 @@ struct mscc_pinctrl {
 	const struct mscc_pin_data *mscc_pins;
 	int num_pins;
 	char * const *function_names;
+	const unsigned long *mscc_gpios;
 };
 
 int mscc_pinctrl_probe(struct udevice *dev, int num_func,
 		       const struct mscc_pin_data *mscc_pins, int num_pins,
-		       char * const *function_names);
+		       char * const *function_names,
+		       const unsigned long *mscc_gpios);
 const struct pinctrl_ops mscc_pinctrl_ops;
 
 const struct dm_gpio_ops mscc_gpio_ops;
diff --git a/drivers/pinctrl/mscc/pinctrl-jr2.c b/drivers/pinctrl/mscc/pinctrl-jr2.c
new file mode 100644
index 0000000..d4af76f
--- /dev/null
+++ b/drivers/pinctrl/mscc/pinctrl-jr2.c
@@ -0,0 +1,323 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Microsemi SoCs pinctrl driver
+ *
+ * Author: <horatiu.vultur at microchip.com>
+ * Copyright (c) 2018 Microsemi Corporation
+ */
+
+#include <common.h>
+#include <config.h>
+#include <dm.h>
+#include <dm/device-internal.h>
+#include <dm/lists.h>
+#include <dm/pinctrl.h>
+#include <dm/root.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <linux/io.h>
+#include <asm/gpio.h>
+#include <asm/system.h>
+#include "mscc-common.h"
+
+enum {
+	FUNC_NONE,
+	FUNC_GPIO,
+	FUNC_IRQ0_IN,
+	FUNC_IRQ0_OUT,
+	FUNC_IRQ1_IN,
+	FUNC_IRQ1_OUT,
+	FUNC_MIIM1,
+	FUNC_MIIM2,
+	FUNC_PCI_WAKE,
+	FUNC_PTP0,
+	FUNC_PTP1,
+	FUNC_PTP2,
+	FUNC_PTP3,
+	FUNC_PWM,
+	FUNC_RECO_CLK0,
+	FUNC_RECO_CLK1,
+	FUNC_SFP0,
+	FUNC_SFP1,
+	FUNC_SFP2,
+	FUNC_SFP3,
+	FUNC_SFP4,
+	FUNC_SFP5,
+	FUNC_SFP6,
+	FUNC_SFP7,
+	FUNC_SFP8,
+	FUNC_SFP9,
+	FUNC_SFP10,
+	FUNC_SFP11,
+	FUNC_SFP12,
+	FUNC_SFP13,
+	FUNC_SFP14,
+	FUNC_SFP15,
+	FUNC_SG0,
+	FUNC_SG1,
+	FUNC_SG2,
+	FUNC_SI,
+	FUNC_TACHO,
+	FUNC_TWI,
+	FUNC_TWI2,
+	FUNC_TWI_SCL_M,
+	FUNC_UART,
+	FUNC_UART2,
+	FUNC_MAX
+};
+
+char *jr2_function_names[] = {
+	[FUNC_NONE]		= "none",
+	[FUNC_GPIO]		= "gpio",
+	[FUNC_IRQ0_IN]		= "irq0_in",
+	[FUNC_IRQ0_OUT]		= "irq0_out",
+	[FUNC_IRQ1_IN]		= "irq1_in",
+	[FUNC_IRQ1_OUT]		= "irq1_out",
+	[FUNC_MIIM1]		= "miim1",
+	[FUNC_MIIM2]		= "miim2",
+	[FUNC_PCI_WAKE]		= "pci_wake",
+	[FUNC_PTP0]		= "ptp0",
+	[FUNC_PTP1]		= "ptp1",
+	[FUNC_PTP2]		= "ptp2",
+	[FUNC_PTP3]		= "ptp3",
+	[FUNC_PWM]		= "pwm",
+	[FUNC_RECO_CLK0]	= "reco_clk0",
+	[FUNC_RECO_CLK1]	= "reco_clk1",
+	[FUNC_SFP0]		= "sfp0",
+	[FUNC_SFP1]		= "sfp1",
+	[FUNC_SFP2]		= "sfp2",
+	[FUNC_SFP3]		= "sfp3",
+	[FUNC_SFP4]		= "sfp4",
+	[FUNC_SFP5]		= "sfp5",
+	[FUNC_SFP6]		= "sfp6",
+	[FUNC_SFP7]		= "sfp7",
+	[FUNC_SFP8]		= "sfp8",
+	[FUNC_SFP9]		= "sfp9",
+	[FUNC_SFP10]		= "sfp10",
+	[FUNC_SFP11]		= "sfp11",
+	[FUNC_SFP12]		= "sfp12",
+	[FUNC_SFP13]		= "sfp13",
+	[FUNC_SFP14]		= "sfp14",
+	[FUNC_SFP15]		= "sfp15",
+	[FUNC_SG0]		= "sg0",
+	[FUNC_SG1]		= "sg1",
+	[FUNC_SG2]		= "sg2",
+	[FUNC_SI]		= "si",
+	[FUNC_TACHO]		= "tacho",
+	[FUNC_TWI]		= "twi",
+	[FUNC_TWI2]		= "twi2",
+	[FUNC_TWI_SCL_M]	= "twi_scl_m",
+	[FUNC_UART]		= "uart",
+	[FUNC_UART2]		= "uart2",
+};
+
+#define JR2_P(p, f0, f1)						\
+static struct mscc_pin_caps jr2_pin_##p = {				\
+	.pin = p,							\
+	.functions = {							\
+			FUNC_GPIO, FUNC_##f0, FUNC_##f1, FUNC_NONE	\
+	},								\
+}
+
+JR2_P(0,  SG0,       NONE);
+JR2_P(1,  SG0,       NONE);
+JR2_P(2,  SG0,       NONE);
+JR2_P(3,  SG0,       NONE);
+JR2_P(4,  SG1,       NONE);
+JR2_P(5,  SG1,       NONE);
+JR2_P(6,  IRQ0_IN,   IRQ0_OUT);
+JR2_P(7,  IRQ1_IN,   IRQ1_OUT);
+JR2_P(8,  PTP0,      NONE);
+JR2_P(9,  PTP1,      NONE);
+JR2_P(10, UART,      NONE);
+JR2_P(11, UART,      NONE);
+JR2_P(12, SG1,       NONE);
+JR2_P(13, SG1,       NONE);
+JR2_P(14, TWI,       TWI_SCL_M);
+JR2_P(15, TWI,       NONE);
+JR2_P(16, SI,        TWI_SCL_M);
+JR2_P(17, SI,        TWI_SCL_M);
+JR2_P(18, SI,        TWI_SCL_M);
+JR2_P(19, PCI_WAKE,  NONE);
+JR2_P(20, IRQ0_OUT,  TWI_SCL_M);
+JR2_P(21, IRQ1_OUT,  TWI_SCL_M);
+JR2_P(22, TACHO,     NONE);
+JR2_P(23, PWM,       NONE);
+JR2_P(24, UART2,     NONE);
+JR2_P(25, UART2,     SI);
+JR2_P(26, PTP2,      SI);
+JR2_P(27, PTP3,      SI);
+JR2_P(28, TWI2,      SI);
+JR2_P(29, TWI,       SI);
+JR2_P(30, SG2,       SI);
+JR2_P(31, SG2,       SI);
+JR2_P(32, SG2,       SI);
+JR2_P(33, SG2,       SI);
+JR2_P(34, NONE,      TWI_SCL_M);
+JR2_P(35, NONE,      TWI_SCL_M);
+JR2_P(36, NONE,      TWI_SCL_M);
+JR2_P(37, NONE,      TWI_SCL_M);
+JR2_P(38, NONE,      TWI_SCL_M);
+JR2_P(39, NONE,      TWI_SCL_M);
+JR2_P(40, NONE,      TWI_SCL_M);
+JR2_P(41, NONE,      TWI_SCL_M);
+JR2_P(42, NONE,      TWI_SCL_M);
+JR2_P(43, NONE,      TWI_SCL_M);
+JR2_P(44, NONE,      SFP8);
+JR2_P(45, NONE,      SFP9);
+JR2_P(46, NONE,      SFP10);
+JR2_P(47, NONE,      SFP11);
+JR2_P(48, SFP0,      NONE);
+JR2_P(49, SFP1,      SI);
+JR2_P(50, SFP2,      SI);
+JR2_P(51, SFP3,      SI);
+JR2_P(52, SFP4,      NONE);
+JR2_P(53, SFP5,      NONE);
+JR2_P(54, SFP6,      NONE);
+JR2_P(55, SFP7,      NONE);
+JR2_P(56, MIIM1,     SFP12);
+JR2_P(57, MIIM1,     SFP13);
+JR2_P(58, MIIM2,     SFP14);
+JR2_P(59, MIIM2,     SFP15);
+JR2_P(60, NONE,      NONE);
+JR2_P(61, NONE,      NONE);
+JR2_P(62, NONE,      NONE);
+JR2_P(63, NONE,      NONE);
+
+#define JR2_PIN(n) {						\
+	.name = "GPIO_"#n,					\
+	.drv_data = &jr2_pin_##n				\
+}
+
+const struct mscc_pin_data jr2_pins[] = {
+	JR2_PIN(0),
+	JR2_PIN(1),
+	JR2_PIN(2),
+	JR2_PIN(3),
+	JR2_PIN(4),
+	JR2_PIN(5),
+	JR2_PIN(6),
+	JR2_PIN(7),
+	JR2_PIN(8),
+	JR2_PIN(9),
+	JR2_PIN(10),
+	JR2_PIN(11),
+	JR2_PIN(12),
+	JR2_PIN(13),
+	JR2_PIN(14),
+	JR2_PIN(15),
+	JR2_PIN(16),
+	JR2_PIN(17),
+	JR2_PIN(18),
+	JR2_PIN(19),
+	JR2_PIN(20),
+	JR2_PIN(21),
+	JR2_PIN(22),
+	JR2_PIN(23),
+	JR2_PIN(24),
+	JR2_PIN(25),
+	JR2_PIN(26),
+	JR2_PIN(27),
+	JR2_PIN(28),
+	JR2_PIN(29),
+	JR2_PIN(30),
+	JR2_PIN(31),
+	JR2_PIN(32),
+	JR2_PIN(33),
+	JR2_PIN(34),
+	JR2_PIN(35),
+	JR2_PIN(36),
+	JR2_PIN(37),
+	JR2_PIN(38),
+	JR2_PIN(39),
+	JR2_PIN(40),
+	JR2_PIN(41),
+	JR2_PIN(42),
+	JR2_PIN(43),
+	JR2_PIN(44),
+	JR2_PIN(45),
+	JR2_PIN(46),
+	JR2_PIN(47),
+	JR2_PIN(48),
+	JR2_PIN(49),
+	JR2_PIN(50),
+	JR2_PIN(51),
+	JR2_PIN(52),
+	JR2_PIN(53),
+	JR2_PIN(54),
+	JR2_PIN(55),
+	JR2_PIN(56),
+	JR2_PIN(57),
+	JR2_PIN(58),
+	JR2_PIN(59),
+	JR2_PIN(60),
+	JR2_PIN(61),
+	JR2_PIN(62),
+	JR2_PIN(63),
+};
+
+const unsigned long jr2_gpios[] = {
+	[MSCC_GPIO_OUT_SET] = 0x00,
+	[MSCC_GPIO_OUT_CLR] = 0x08,
+	[MSCC_GPIO_OUT] = 0x10,
+	[MSCC_GPIO_IN] = 0x18,
+	[MSCC_GPIO_OE] = 0x20,
+	[MSCC_GPIO_INTR] = 0x28,
+	[MSCC_GPIO_INTR_ENA] = 0x30,
+	[MSCC_GPIO_INTR_IDENT] = 0x38,
+	[MSCC_GPIO_ALT0] = 0x40,
+	[MSCC_GPIO_ALT1] = 0x48,
+};
+
+static int jr2_gpio_probe(struct udevice *dev)
+{
+	struct gpio_dev_priv *uc_priv;
+
+	uc_priv = dev_get_uclass_priv(dev);
+	uc_priv->bank_name = "jr2-gpio";
+	uc_priv->gpio_count = ARRAY_SIZE(jr2_pins);
+
+	return 0;
+}
+
+static struct driver jr2_gpio_driver = {
+	.name	= "jr2-gpio",
+	.id	= UCLASS_GPIO,
+	.probe	= jr2_gpio_probe,
+	.ops	= &mscc_gpio_ops,
+};
+
+int jr2_pinctrl_probe(struct udevice *dev)
+{
+	int ret;
+
+	ret = mscc_pinctrl_probe(dev, FUNC_MAX, jr2_pins,
+				 ARRAY_SIZE(jr2_pins),
+				 jr2_function_names,
+				 jr2_gpios);
+
+	if (ret)
+		return ret;
+
+	ret = device_bind(dev, &jr2_gpio_driver, "jr2-gpio", NULL,
+			  dev_of_offset(dev), NULL);
+
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static const struct udevice_id jr2_pinctrl_of_match[] = {
+	{ .compatible = "mscc,jaguar2-pinctrl" },
+	{},
+};
+
+U_BOOT_DRIVER(jr2_pinctrl) = {
+	.name = "jr2-pinctrl",
+	.id = UCLASS_PINCTRL,
+	.of_match = of_match_ptr(jr2_pinctrl_of_match),
+	.probe = jr2_pinctrl_probe,
+	.priv_auto_alloc_size = sizeof(struct mscc_pinctrl),
+	.ops = &mscc_pinctrl_ops,
+};
diff --git a/drivers/pinctrl/mscc/pinctrl-luton.c b/drivers/pinctrl/mscc/pinctrl-luton.c
index 7166588..8c636ff 100644
--- a/drivers/pinctrl/mscc/pinctrl-luton.c
+++ b/drivers/pinctrl/mscc/pinctrl-luton.c
@@ -123,6 +123,19 @@ static const struct mscc_pin_data luton_pins[] = {
 	LUTON_PIN(31),
 };
 
+const unsigned long luton_gpios[] = {
+	[MSCC_GPIO_OUT_SET] = 0x00,
+	[MSCC_GPIO_OUT_CLR] = 0x04,
+	[MSCC_GPIO_OUT] = 0x08,
+	[MSCC_GPIO_IN] = 0x0c,
+	[MSCC_GPIO_OE] = 0x10,
+	[MSCC_GPIO_INTR] = 0x14,
+	[MSCC_GPIO_INTR_ENA] = 0x18,
+	[MSCC_GPIO_INTR_IDENT] = 0x1c,
+	[MSCC_GPIO_ALT0] = 0x20,
+	[MSCC_GPIO_ALT1] = 0x24,
+};
+
 static int luton_gpio_probe(struct udevice *dev)
 {
 	struct gpio_dev_priv *uc_priv;
@@ -146,7 +159,8 @@ int luton_pinctrl_probe(struct udevice *dev)
 	int ret;
 
 	ret = mscc_pinctrl_probe(dev, FUNC_MAX, luton_pins,
-				 ARRAY_SIZE(luton_pins), luton_function_names);
+				 ARRAY_SIZE(luton_pins), luton_function_names,
+				 luton_gpios);
 
 	if (ret)
 		return ret;
diff --git a/drivers/pinctrl/mscc/pinctrl-ocelot.c b/drivers/pinctrl/mscc/pinctrl-ocelot.c
index 10f9b90..fb02061 100644
--- a/drivers/pinctrl/mscc/pinctrl-ocelot.c
+++ b/drivers/pinctrl/mscc/pinctrl-ocelot.c
@@ -138,6 +138,19 @@ static const struct mscc_pin_data ocelot_pins[] = {
 	OCELOT_PIN(21),
 };
 
+const unsigned long ocelot_gpios[] = {
+	[MSCC_GPIO_OUT_SET] = 0x00,
+	[MSCC_GPIO_OUT_CLR] = 0x04,
+	[MSCC_GPIO_OUT] = 0x08,
+	[MSCC_GPIO_IN] = 0x0c,
+	[MSCC_GPIO_OE] = 0x10,
+	[MSCC_GPIO_INTR] = 0x14,
+	[MSCC_GPIO_INTR_ENA] = 0x18,
+	[MSCC_GPIO_INTR_IDENT] = 0x1c,
+	[MSCC_GPIO_ALT0] = 0x20,
+	[MSCC_GPIO_ALT1] = 0x24,
+};
+
 static int ocelot_gpio_probe(struct udevice *dev)
 {
 	struct gpio_dev_priv *uc_priv;
@@ -162,7 +175,8 @@ int ocelot_pinctrl_probe(struct udevice *dev)
 
 	ret = mscc_pinctrl_probe(dev, FUNC_MAX, ocelot_pins,
 				 ARRAY_SIZE(ocelot_pins),
-				 ocelot_function_names);
+				 ocelot_function_names,
+				 ocelot_gpios);
 
 	if (ret)
 		return ret;
-- 
2.7.4



More information about the U-Boot mailing list