[U-Boot] [PATCH v2 06/22] board: mx6sabresd: Add board_fit_config_name_match to support FIT in SPL

[Peng Fan]

> -----Original Message-----
> From: Abel Vesa
> Sent: 2019年1月29日 19:31
> To: Tom Rini <trini at konsulko.com>; Fabio Estevam
> <fabio.estevam at nxp.com>; u-boot at lists.denx.de; dl-uboot-imx
> <uboot-imx at nxp.com>; Peng Fan <peng.fan at nxp.com>
> Cc: Nitin Garg <nitin.garg at nxp.com>; Abel Vesa <abel.vesa at nxp.com>
> Subject: [PATCH v2 06/22] board: mx6sabresd: Add
> board_fit_config_name_match to support FIT in SPL
> 
> This matches one of the following three boards (or fails):
>  - imx6q-sabresd
>  - imx6qp-sabresd
>  - imx6dl-sabresd
> 
> Signed-off-by: Abel Vesa <abel.vesa at nxp.com>
> ---
>  board/freescale/mx6sabresd/mx6sabresd.c | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
> 
> diff --git a/board/freescale/mx6sabresd/mx6sabresd.c
> b/board/freescale/mx6sabresd/mx6sabresd.c
> index 0183ede..4688095 100644
> --- a/board/freescale/mx6sabresd/mx6sabresd.c
> +++ b/board/freescale/mx6sabresd/mx6sabresd.c
> @@ -1062,3 +1062,21 @@ void board_init_f(ulong dummy)
>  	board_init_r(NULL, 0);
>  }
>  #endif
> +
> +#ifdef CONFIG_SPL_LOAD_FIT
> +int board_fit_config_name_match(const char *name) {
> +	if (is_mx6dq()) {
> +		if (!strcmp(name, "imx6q-sabresd"))
> +			return 0;
> +	} else if (is_mx6dqp()) {
> +		if (!strcmp(name, "imx6qp-sabresd"))
> +			return 0;
> +	} else if (is_mx6dl()) {
> +		if (!strcmp(name, "imx6dl-sabresd"))
> +			return 0;
> +	}
> +
> +	return -1;
> +}
> +#endif

Reviewed-by: Peng Fan <peng.fan at nxp.com>

> --
> 2.7.4