[U-Boot] [linux-sunxi] Re: [PATCH 0/7] mmc: sunxi: Enable DM_MMC

[Priit Laes]

On Mon, Jan 14, 2019 at 04:00:44PM +0530, Jagan Teki wrote:
> On Mon 14 Jan, 2019, 3:53 PM Priit Laes <plaes at plaes.org wrote:
> 
> > On Mon, Jan 14, 2019 at 03:40:37PM +0530, Jagan Teki wrote:
> > > On Mon, Jan 14, 2019 at 3:05 PM Priit Laes <plaes at plaes.org> wrote:
> > > >
> > > > On Fri, Jan 11, 2019 at 11:34:07PM +0530, Jagan Teki wrote:
> > > > > I thought of waiting this till CLK framework gets Mainline,
> > > > > but migration deadline for DM_MMC and BLK seems expiring in
> > > > > next release. So instead of doing so huddle  and make some last
> > > > > minute changes, I have managed to add CLK, Reset code for mmc
> > > > > driver via driver data.
> > > >
> > > > U-Boot 2019.01-rc3-00084-g0ce29380cf (Jan 14 2019 - 11:22:13 +0200)
> > Allwinner Technology
> > > >
> > > > CPU:   Allwinner A20 (SUN7I)
> > > > Model: Olimex A20-OLinuXino-LIME2-eMMC
> > > > I2C:   ready
> > > > DRAM:  1 GiB
> > > > MMC:   mmc at 1c0f000: 0, mmc at 1c11000: 1
> > > > Loading Environment from FAT... Card did not respond to voltage select!
> > > >
> > > > eMMC seems to be broken:
> > > > => mmc list
> > > > mmc at 1c0f000: 0
> > > > mmc at 1c11000: 1
> > > > => mmc dev 1
> > > > => mmc dev 0
> > > > MMC: no card present
> > > > => mmc part
> > > > MMC: no card present
> > > > => mmc info
> > > > MMC: no card present
> > >
> > > Can you try this
> > > diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c
> > > index 33f1ec5e5a..7fab88c47f 100644
> > > --- a/drivers/mmc/sunxi_mmc.c
> > > +++ b/drivers/mmc/sunxi_mmc.c
> > > @@ -648,7 +648,7 @@ static int sunxi_mmc_probe(struct udevice *dev)
> > >         gate_reg = (void *)ccu_reg + priv->variant->gate_offset;
> > >         setbits_le32(gate_reg, BIT(AHB_GATE_OFFSET_MMC(priv->mmc_no)));
> > >
> > > -       if ((!IS_ENABLED(CONFIG_MACH_SUN4I)) &&
> > priv->variant->has_reset) {
> > > +       if ((!IS_ENABLED(CONFIG_MACH_SUN7I)) &&
> > priv->variant->has_reset) {
> > >                 reset_reg = (void *)ccu_reg +
> > priv->variant->reset_offset;
> > >                 setbits_le32(reset_reg, BIT(priv->mmc_no +
> > >                              priv->variant->reset_start_bit));
> >
> > Still fails:
> >
> > MMC: no card present
> > scanning bus for devices...
> > Found 0 device(s).
> >
> > Device 0: unknown device
> >
> > Device 0: unknown device
> >
> 
> Can you print the reg values mclk and gate_reg. I have Lime2 which is fine
> but doesn't have eMMC.

mclk0: 0x0
gate0: 0x200c141
mclk2: 0x0
gate2: 0x200c541

> 
> -- 
> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe at googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.