[U-Boot] [linux-sunxi] Re: [PATCH 0/7] mmc: sunxi: Enable DM_MMC

[Jagan Teki]

On Mon 14 Jan, 2019, 3:53 PM Priit Laes <plaes at plaes.org wrote:

> On Mon, Jan 14, 2019 at 03:40:37PM +0530, Jagan Teki wrote:
> > On Mon, Jan 14, 2019 at 3:05 PM Priit Laes <plaes at plaes.org> wrote:
> > >
> > > On Fri, Jan 11, 2019 at 11:34:07PM +0530, Jagan Teki wrote:
> > > > I thought of waiting this till CLK framework gets Mainline,
> > > > but migration deadline for DM_MMC and BLK seems expiring in
> > > > next release. So instead of doing so huddle  and make some last
> > > > minute changes, I have managed to add CLK, Reset code for mmc
> > > > driver via driver data.
> > >
> > > U-Boot 2019.01-rc3-00084-g0ce29380cf (Jan 14 2019 - 11:22:13 +0200)
> Allwinner Technology
> > >
> > > CPU:   Allwinner A20 (SUN7I)
> > > Model: Olimex A20-OLinuXino-LIME2-eMMC
> > > I2C:   ready
> > > DRAM:  1 GiB
> > > MMC:   mmc at 1c0f000: 0, mmc at 1c11000: 1
> > > Loading Environment from FAT... Card did not respond to voltage select!
> > >
> > > eMMC seems to be broken:
> > > => mmc list
> > > mmc at 1c0f000: 0
> > > mmc at 1c11000: 1
> > > => mmc dev 1
> > > => mmc dev 0
> > > MMC: no card present
> > > => mmc part
> > > MMC: no card present
> > > => mmc info
> > > MMC: no card present
> >
> > Can you try this
> > diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c
> > index 33f1ec5e5a..7fab88c47f 100644
> > --- a/drivers/mmc/sunxi_mmc.c
> > +++ b/drivers/mmc/sunxi_mmc.c
> > @@ -648,7 +648,7 @@ static int sunxi_mmc_probe(struct udevice *dev)
> >         gate_reg = (void *)ccu_reg + priv->variant->gate_offset;
> >         setbits_le32(gate_reg, BIT(AHB_GATE_OFFSET_MMC(priv->mmc_no)));
> >
> > -       if ((!IS_ENABLED(CONFIG_MACH_SUN4I)) &&
> priv->variant->has_reset) {
> > +       if ((!IS_ENABLED(CONFIG_MACH_SUN7I)) &&
> priv->variant->has_reset) {
> >                 reset_reg = (void *)ccu_reg +
> priv->variant->reset_offset;
> >                 setbits_le32(reset_reg, BIT(priv->mmc_no +
> >                              priv->variant->reset_start_bit));
>
> Still fails:
>
> MMC: no card present
> scanning bus for devices...
> Found 0 device(s).
>
> Device 0: unknown device
>
> Device 0: unknown device
>

Can you print the reg values mclk and gate_reg. I have Lime2 which is fine
but doesn't have eMMC.