[U-Boot] Help/Clue to improve Z-turn board support

[Alexandre GRIVEAUX]

Le 2019-01-15 13:53, Alexandre GRIVEAUX a écrit :
> Hello,
> 
> I tried to have mainline uboot for Z-turn board (patch sent in
> December, wrong window: [PATCH] ARM: zynq: Adding ps7_init_gpl.c for
> Z-turn board)
> Even with the right ps7_init_gpl.c : the board doesn't boot.
> 
> I tried to correct zynq-zturn.dts [0] because I don't find MYIR
> references in drivers from this line: compatible = "myir,zynq-zturn",
> "xlnx,zynq-7000";
> And the HEADER is not the same as the other boards: same result.
> 
> Picking a board (microzed) with zturn DTS above and using
> microzed_defconfig provide some good result to me (except for
> ethernet)
> 
> According to the build messages between zturn and microzed, the make
> command doesn't create this SPL files:
> 
> spl/board/xilinx/zynq/.built-in.o.cmd
> spl/board/xilinx/zynq/built-in.o
> spl/board/xilinx/zynq/zynq-microzed/ps7_init_gpl.o
> spl/board/xilinx/zynq/zynq-microzed/.ps7_init_gpl.o.cmd
> spl/u-boot-spl
> 
> I don’t have a clue how to resolv that.
> Do you have any idea ?
> 
> Thanks
> 
> [0] Exemple taken from
> https://elinux.org/images/f/f9/Petazzoni-device-tree-dummies_0.pdf
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot
Hello,

Nobody to help me ?

Thanks.