[U-Boot] [PATCH v2] Aquantia: Print information about system interface and firmware version

[Joe Hershberger]

On Tue, Jan 22, 2019 at 5:14 PM Joe Hershberger
<joe.hershberger at gmail.com> wrote:
>
> On Tue, Nov 6, 2018 at 6:17 AM Valentin-catalin Neacsu
> <valentin-catalin.neacsu at nxp.com> wrote:
> >
> > Print information about Aquantia firmware loaded on the phy.
> >
> > Signed-off-by: Valentin Catalin Neacsu <valentin-catalin.neacsu at nxp.com>
> > ---
> > V2:
> >  - Fix typo in title. (Clement Peron)
> >
> >  drivers/net/phy/aquantia.c | 21 +++++++++++++++++++++
> >  1 file changed, 21 insertions(+)
> >
> > diff --git a/drivers/net/phy/aquantia.c b/drivers/net/phy/aquantia.c
> > index 553069f3dc..2609664c69 100644
> > --- a/drivers/net/phy/aquantia.c
> > +++ b/drivers/net/phy/aquantia.c
> > @@ -22,6 +22,11 @@
> >
> >  #define AQUANTIA_SYSTEM_INTERFACE_SR     0xe812
> >  #define AQUANTIA_VENDOR_PROVISIONING_REG 0xC441
> > +#define AQUANTIA_FIRMWARE_ID            0x20
> > +#define AQUANTIA_RESERVED_STATUS        0xc885
> > +#define AQUANTIA_FIRMWARE_MAJOR_MASK    0xff00
> > +#define AQUANTIA_FIRMWARE_MINOR_MASK    0xff
> > +#define AQUANTIA_FIRMWARE_BUILD_MASK    0xf0
> >
> >  #define AQUANTIA_USX_AUTONEG_CONTROL_ENA 0x0008
> >  #define AQUANTIA_SI_IN_USE_MASK          0x0078
> > @@ -30,6 +35,7 @@
> >  int aquantia_config(struct phy_device *phydev)
> >  {
> >         u32 val = phy_read(phydev, MDIO_MMD_PMAPMD, MII_BMCR);
> > +       u32 reg_val1 = 0;
> >
> >         if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
> >                 /* 1000BASE-T mode */
> > @@ -56,6 +62,11 @@ int aquantia_config(struct phy_device *phydev)
> >                         phy_write(phydev, MDIO_MMD_PHYXS,
> >                                   AQUANTIA_VENDOR_PROVISIONING_REG,
> >                                   AQUANTIA_USX_AUTONEG_CONTROL_ENA);
>
> Is this still needed? This hunk doesn't apply any more.

I fixed up the conflict and will take it as is.

> Thanks,
> -Joe
>
> > +                       printf("%s: system interface USXGMII\n",
> > +                              phydev->dev->name);
> > +               } else {
> > +                       printf("%s: system interface XFI\n",
> > +                              phydev->dev->name);
> >                 }
> >
> >         } else if (phydev->interface == PHY_INTERFACE_MODE_SGMII_2500) {
> > @@ -73,6 +84,16 @@ int aquantia_config(struct phy_device *phydev)
> >                 val = (val & ~AQUNTIA_SPEED_MSB_MASK) | AQUNTIA_SPEED_LSB_MASK;
> >                 phy_write(phydev, MDIO_MMD_PMAPMD, MII_BMCR, val);
> >         }
> > +
> > +       val = phy_read(phydev, MDIO_MMD_VEND1, AQUANTIA_RESERVED_STATUS);
> > +       reg_val1 = phy_read(phydev, MDIO_MMD_VEND1, AQUANTIA_FIRMWARE_ID);
> > +
> > +       printf("%s: %s Firmware Version %x.%x.%x\n", phydev->dev->name,
> > +              phydev->drv->name,
> > +              (reg_val1 & AQUANTIA_FIRMWARE_MAJOR_MASK) >> 8,
> > +              reg_val1 & AQUANTIA_FIRMWARE_MINOR_MASK,
> > +              (val & AQUANTIA_FIRMWARE_BUILD_MASK) >> 4);
> > +
> >         return 0;
> >  }
> >
> > --
> > 2.17.1
> >
> > _______________________________________________
> > U-Boot mailing list
> > U-Boot at lists.denx.de
> > https://lists.denx.de/listinfo/u-boot