[U-Boot] [PATCH 19/26] configs: mx6sabresd: Add SPL FIT and DM support

[Abel Vesa]

Enable all the necessary configs for SPL DM and FIT support for
mx6sabresd.

Signed-off-by: Abel Vesa <abel.vesa at nxp.com>
---
 configs/mx6sabresd_defconfig | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

diff --git a/configs/mx6sabresd_defconfig b/configs/mx6sabresd_defconfig
index 1857c18..a208425 100644
--- a/configs/mx6sabresd_defconfig
+++ b/configs/mx6sabresd_defconfig
@@ -4,17 +4,26 @@ CONFIG_SYS_TEXT_BASE=0x17800000
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_TARGET_MX6SABRESD=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_SYS_MALLOC_F_LEN=0x400
 CONFIG_SPL=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=1
+CONFIG_TPL_SYS_MALLOC_F_LEN=0x400
+CONFIG_FIT=y
+CONFIG_SPL_FIT_PRINT=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_FIT_SOURCE="arch/arm/mach-imx/mx6/fit_spl.its"
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
 # CONFIG_CONSOLE_MUX is not set
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
 CONFIG_SUPPORT_RAW_INITRD=y
+CONFIG_SPL_SEPARATE_BSS=y
+CONFIG_SPL_FIT_IMAGE_TINY=y
 CONFIG_SPL_EXT_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_OS_BOOT=y
@@ -46,23 +55,30 @@ CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
 CONFIG_EFI_PARTITION=y
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="imx6q-sabresd"
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_SPL_DM=y
 CONFIG_USB_FUNCTION_FASTBOOT=y
 CONFIG_FASTBOOT_BUF_ADDR=0x12000000
 CONFIG_FASTBOOT_BUF_SIZE=0x10000000
 CONFIG_FASTBOOT_FLASH=y
 CONFIG_FASTBOOT_FLASH_MMC_DEV=2
+CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_PHYLIB=y
 CONFIG_MII=y
 CONFIG_PCI=y
+CONFIG_DM_REGULATOR=y
 CONFIG_SPI=y
 CONFIG_MXC_SPI=y
 CONFIG_USB=y
-CONFIG_USB_STORAGE=y
+CONFIG_DM_USB=y
+# CONFIG_SPL_DM_USB is not set
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_MANUFACTURER="FSL"
 CONFIG_USB_GADGET_VENDOR_NUM=0x0525
@@ -72,4 +88,3 @@ CONFIG_USB_HOST_ETHER=y
 CONFIG_USB_ETHER_ASIX=y
 CONFIG_VIDEO=y
 # CONFIG_VIDEO_SW_CURSOR is not set
-CONFIG_OF_LIBFDT=y
-- 
2.7.4