[U-Boot] [PATCH v2 18/21] pcm052: bk4: sdcard: Add support for SD card booting/recovery
Lukasz Majewski
lukma at denx.de
Sun Jan 20 13:34:22 UTC 2019
This code allows reusing the default u-boot as in the late board init, the
default envs are restored and proper recovery scripts executed.
Signed-off-by: Lukasz Majewski <lukma at denx.de>
---
Changes in v2: None
arch/arm/cpu/armv7/vf610/Kconfig | 1 +
arch/arm/include/asm/arch-vf610/imx-regs.h | 2 ++
board/phytec/pcm052/pcm052.c | 32 ++++++++++++++++++++++++++++++
3 files changed, 35 insertions(+)
diff --git a/arch/arm/cpu/armv7/vf610/Kconfig b/arch/arm/cpu/armv7/vf610/Kconfig
index 13905b5281..5d485a3ce2 100644
--- a/arch/arm/cpu/armv7/vf610/Kconfig
+++ b/arch/arm/cpu/armv7/vf610/Kconfig
@@ -23,6 +23,7 @@ config TARGET_BK4R1
bool "BK4r1"
select SYS_FSL_ERRATUM_ESDHC135
select SYS_FSL_ERRATUM_ESDHC_A001
+ select BOARD_LATE_INIT
endchoice
diff --git a/arch/arm/include/asm/arch-vf610/imx-regs.h b/arch/arm/include/asm/arch-vf610/imx-regs.h
index 5d1f63c98b..ae0a187c4d 100644
--- a/arch/arm/include/asm/arch-vf610/imx-regs.h
+++ b/arch/arm/include/asm/arch-vf610/imx-regs.h
@@ -289,6 +289,8 @@
#define SRC_SRSR_WDOG_M4 (0x1 << 4)
#define SRC_SRSR_WDOG_A5 (0x1 << 3)
#define SRC_SRSR_POR_RST (0x1 << 0)
+#define SRC_SBMR1_BOOTCFG1_SDMMC BIT(6)
+#define SRC_SBMR1_BOOTCFG1_MMC BIT(4)
#define SRC_SBMR2_BMOD_MASK (0x3 << 24)
#define SRC_SBMR2_BMOD_SHIFT 24
#define SRC_SBMR2_BMOD_FUSES 0x0
diff --git a/board/phytec/pcm052/pcm052.c b/board/phytec/pcm052/pcm052.c
index 4a18b0e0f4..d4f170a503 100644
--- a/board/phytec/pcm052/pcm052.c
+++ b/board/phytec/pcm052/pcm052.c
@@ -13,6 +13,7 @@
#include <asm/arch/ddrmc-vf610.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/clock.h>
+#include <environment.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -307,6 +308,37 @@ int board_init(void)
return 0;
}
+#ifdef CONFIG_TARGET_BK4R1
+int board_late_init(void)
+{
+ struct src *psrc = (struct src *)SRC_BASE_ADDR;
+ u32 reg;
+
+ /*
+ * BK4r1 handle emergency/service SD card boot
+ * Checking the SBMR1 register BOOTCFG1 byte:
+ * NAND:
+ * bit [2] - NAND data width - 16
+ * bit [5] - NAND fast boot
+ * bit [7] = 1 - NAND as a source of booting
+ * SD card (0x64):
+ * bit [4] = 0 - SD card source
+ * bit [6] = 1 - SD/MMC source
+ */
+
+ reg = readl(&psrc->sbmr1);
+ if ((reg & SRC_SBMR1_BOOTCFG1_SDMMC) &&
+ !(reg & SRC_SBMR1_BOOTCFG1_MMC)) {
+ printf("------ SD card boot -------\n");
+ set_default_env("!LVFBootloader", 0);
+ env_set("bootcmd",
+ "run prepare_install_bk4r1_envs; run install_bk4r1rs");
+ }
+
+ return 0;
+}
+#endif /* CONFIG_TARGET_BK4R1 */
+
int checkboard(void)
{
#ifdef CONFIG_TARGET_BK4R1
--
2.11.0
More information about the U-Boot
mailing list