[U-Boot] [PATCH 5/8] warp7: defconfig: Switch on IMX7 pinctrl for both ports

[Bryan O'Donoghue]

On 08/01/2019 13:26, Peng Fan wrote:
> 
>>
>>
>>> -----Original Message-----
>>> From: Bryan O'Donoghue [mailto:bryan.odonoghue at linaro.org]
>>> Sent: 2019年1月3日 9:45
>>> To: u-boot at lists.denx.de
>>> Cc: Fabio Estevam <fabio.estevam at nxp.com>; Peng Fan
>>> <peng.fan at nxp.com>; Bryan O'Donoghue <bryan.odonoghue at linaro.org>;
>>> Stefano Babic <sbabic at denx.de>
>>> Subject: [PATCH 5/8] warp7: defconfig: Switch on IMX7 pinctrl for both
>>> ports
>>>
>>> Switches on the IMX7 pinctrl driver for the warp7 and warp7_bl33
>>> ports, necessary to convert over to DM for this board.
>>>
>>> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue at linaro.org>
>>> Cc: Peng Fan <peng.fan at nxp.com>
>>> Cc: Fabio Estevam <fabio.estevam at nxp.com>
>>> Cc: Stefano Babic <sbabic at denx.de>
>>> ---
>>>   configs/warp7_bl33_defconfig | 2 ++
>>>   configs/warp7_defconfig      | 2 ++
>>>   2 files changed, 4 insertions(+)
>>>
>>> diff --git a/configs/warp7_bl33_defconfig
>>> b/configs/warp7_bl33_defconfig index b2f943c775..a2c2555315 100644
>>> --- a/configs/warp7_bl33_defconfig
>>> +++ b/configs/warp7_bl33_defconfig
>>> @@ -41,3 +41,5 @@ CONFIG_USB_ETH_CDC=y
>>> CONFIG_USBNET_HOST_ADDR="de:ad:be:af:00:00"
>>>   CONFIG_OPTEE_TZDRAM_SIZE=0x2000000
>>>   CONFIG_DEFAULT_DEVICE_TREE="imx7s-warp"
>>> +CONFIG_PINCTRL=y
>>> +CONFIG_PINCTRL_IMX7=y
>>> diff --git a/configs/warp7_defconfig b/configs/warp7_defconfig index
>>> 65d801ffe2..8691d00491 100644
>>> --- a/configs/warp7_defconfig
>>> +++ b/configs/warp7_defconfig
>>> @@ -54,3 +54,5 @@ CONFIG_OPTEE_TZDRAM_SIZE=0x3000000
>>>   CONFIG_OPTEE_TZDRAM_BASE=0x9d000000
>>>   CONFIG_BOOTM_OPTEE=y
>>>   CONFIG_DEFAULT_DEVICE_TREE="imx7s-warp"
>>> +CONFIG_PINCTRL=y
>>> +CONFIG_PINCTRL_IMX7=y
>>
>> Reviewed-by: Peng Fan <peng.fan at nxp.com>
> 
> Just have a follow up question,
> in patch 4/8, DM MMC is enabled, but in 5/8 pinctrl DM is enabled.
> This might be not correct, the DM MMC/PINCTRL/GPIO needs to be in one patch.
> The fsl_esdhc DM support does not support DM MMC with legacy iomux code.

Hmm.

OK, then I'll squash these.