[U-Boot] [PATCH] common: Break USB_STORAGE dependency between SPL and u-boot proper

[Marek Vasut]

On 1/15/19 12:07 PM, Abel Vesa wrote:
> Some boards might need USB_STORAGE enabled in u-boot proper but not in SPL.
> Make a separate config for SPL and keep the same depends on conditions but for SPL.

Is this new or is this something which worked before and broke in the
last few releases ? I recall discussing a patch changing this behavior
before.

> Signed-off-by: Abel Vesa <abel.vesa at nxp.com>
> ---
>  common/Makefile                | 2 +-
>  configs/apalis_imx6_defconfig  | 1 +
>  configs/colibri_imx6_defconfig | 1 +
>  configs/mx6sabresd_defconfig   | 1 +
>  drivers/usb/Kconfig            | 8 ++++++++
>  5 files changed, 12 insertions(+), 1 deletion(-)
> 
> diff --git a/common/Makefile b/common/Makefile
> index 0de60b3..34931f3 100644
> --- a/common/Makefile
> +++ b/common/Makefile
> @@ -77,7 +77,7 @@ obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += fdt_support.o
>  
>  ifdef CONFIG_SPL_USB_HOST_SUPPORT
>  obj-$(CONFIG_SPL_USB_SUPPORT) += usb.o usb_hub.o
> -obj-$(CONFIG_USB_STORAGE) += usb_storage.o
> +obj-$(CONFIG_SPL_USB_STORAGE) += usb_storage.o

Should be obj-$(CONFIG_$(SPL_)USB_STORAGE) += usb_storage.o

>  else
>  obj-$(CONFIG_USB_MUSB_HOST) += usb.o
>  endif
> diff --git a/configs/apalis_imx6_defconfig b/configs/apalis_imx6_defconfig
> index e02d9bc..c4916ad 100644
> --- a/configs/apalis_imx6_defconfig
> +++ b/configs/apalis_imx6_defconfig
> @@ -25,6 +25,7 @@ CONFIG_SPL_I2C_SUPPORT=y
>  CONFIG_SPL_USB_HOST_SUPPORT=y
>  CONFIG_SPL_USB_GADGET=y
>  CONFIG_SPL_USB_SDP_SUPPORT=y
> +CONFIG_SPL_USB_STORAGE=y
>  CONFIG_HUSH_PARSER=y
>  CONFIG_SYS_PROMPT="Apalis iMX6 # "
>  CONFIG_CMD_BOOTZ=y
> diff --git a/configs/colibri_imx6_defconfig b/configs/colibri_imx6_defconfig
> index 68f0746..441a4e7 100644
> --- a/configs/colibri_imx6_defconfig
> +++ b/configs/colibri_imx6_defconfig
> @@ -25,6 +25,7 @@ CONFIG_SPL_I2C_SUPPORT=y
>  CONFIG_SPL_USB_HOST_SUPPORT=y
>  CONFIG_SPL_USB_GADGET=y
>  CONFIG_SPL_USB_SDP_SUPPORT=y
> +CONFIG_SPL_USB_STORAGE=y
>  CONFIG_HUSH_PARSER=y
>  CONFIG_SYS_PROMPT="Colibri iMX6 # "
>  CONFIG_CMD_BOOTZ=y
> diff --git a/configs/mx6sabresd_defconfig b/configs/mx6sabresd_defconfig
> index 1857c18..3532fce 100644
> --- a/configs/mx6sabresd_defconfig
> +++ b/configs/mx6sabresd_defconfig
> @@ -21,6 +21,7 @@ CONFIG_SPL_OS_BOOT=y
>  CONFIG_SPL_USB_HOST_SUPPORT=y
>  CONFIG_SPL_USB_GADGET=y
>  CONFIG_SPL_USB_SDP_SUPPORT=y
> +CONFIG_SPL_USB_STORAGE=y
>  CONFIG_SPL_WATCHDOG_SUPPORT=y
>  CONFIG_HUSH_PARSER=y
>  CONFIG_CMD_BOOTZ=y
> diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
> index 3b53bf2..4185e16 100644
> --- a/drivers/usb/Kconfig
> +++ b/drivers/usb/Kconfig
> @@ -89,6 +89,14 @@ config USB_STORAGE
>  	  Say Y here if you want to connect USB mass storage devices to your
>  	  board's USB port.
>  
> +config SPL_USB_STORAGE
> +	bool "SPL USB Mass Storage support"
> +	depends on !(SPL_BLK && !SPL_DM_USB)
> +	---help---
> +	  Say Y here if you want to connect USB mass storage devices to your
> +	  board's USB port in SPL.
> +
> +
>  config USB_KEYBOARD
>  	bool "USB Keyboard support"
>  	select SYS_STDIO_DEREGISTER
> 


-- 
Best regards,
Marek Vasut