[U-Boot] [PATCH v2 3/3] mmc: omap_hsmmc: Use regulator_set_enable_if_allowed for enabling regulator

[Lokesh Vutla]

Use regulator_set_enable_if_allowed() api instead of regulator_set_enable()
while enabling io regulators. This way the driver doesn't see an error
when disabling an always-on regulator and when enabling is not supported.

Reviewed-by: Simon Glass <sjg at chromium.org>
Signed-off-by: Lokesh Vutla <lokeshvutla at ti.com>
---
 drivers/mmc/omap_hsmmc.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c
index 5cb97eb02a..efbe75baa4 100644
--- a/drivers/mmc/omap_hsmmc.c
+++ b/drivers/mmc/omap_hsmmc.c
@@ -470,21 +470,21 @@ static int omap_hsmmc_set_io_regulator(struct mmc *mmc, int mV)
 		return 0;
 
 	/* Disable PBIAS */
-	ret = regulator_set_enable(priv->pbias_supply, false);
-	if (ret && ret != -ENOSYS)
+	ret = regulator_set_enable_if_allowed(priv->pbias_supply, false);
+	if (ret)
 		return ret;
 
 	/* Turn off IO voltage */
-	ret = regulator_set_enable(mmc->vqmmc_supply, false);
-	if (ret && ret != -ENOSYS)
+	ret = regulator_set_enable_if_allowed(mmc->vqmmc_supply, false);
+	if (ret)
 		return ret;
 	/* Program a new IO voltage value */
 	ret = regulator_set_value(mmc->vqmmc_supply, uV);
 	if (ret)
 		return ret;
 	/* Turn on IO voltage */
-	ret = regulator_set_enable(mmc->vqmmc_supply, true);
-	if (ret && ret != -ENOSYS)
+	ret = regulator_set_enable_if_allowed(mmc->vqmmc_supply, true);
+	if (ret)
 		return ret;
 
 	/* Program PBIAS voltage*/
@@ -492,8 +492,8 @@ static int omap_hsmmc_set_io_regulator(struct mmc *mmc, int mV)
 	if (ret && ret != -ENOSYS)
 		return ret;
 	/* Enable PBIAS */
-	ret = regulator_set_enable(priv->pbias_supply, true);
-	if (ret && ret != -ENOSYS)
+	ret = regulator_set_enable_if_allowed(priv->pbias_supply, true);
+	if (ret)
 		return ret;
 
 	return 0;
-- 
2.19.2