[U-Boot] [RFC 08/17] dts: imx: Add imx6q-sabresd dts and imx6qdl-sabresd dtsi files

Lukasz Majewski lukma at denx.de
Fri Jan 18 23:54:40 UTC 2019


On Wed, 16 Jan 2019 14:03:32 +0000
Abel Vesa <abel.vesa at nxp.com> wrote:

> Add necessary dts and dtsi files in order to enable DM in both
> SPL and u-boot proper for mx6sabresd.

Please state the exact SHA1 and branch for this porting.

> 
> Signed-off-by: Abel Vesa <abel.vesa at nxp.com>
> ---
>  arch/arm/dts/Makefile             |    3 +-
>  arch/arm/dts/imx6q-sabresd.dts    |   92 ++++
>  arch/arm/dts/imx6qdl-sabresd.dtsi | 1065
> +++++++++++++++++++++++++++++++++++++ 3 files changed, 1159
> insertions(+), 1 deletion(-) create mode 100644
> arch/arm/dts/imx6q-sabresd.dts create mode 100644
> arch/arm/dts/imx6qdl-sabresd.dtsi
> 
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index dad5436..1614a19 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -439,7 +439,8 @@ dtb-$(CONFIG_MX6QDL) += \
>  	imx6q-icore-mipi.dtb \
>  	imx6q-icore-rqs.dtb \
>  	imx6q-logicpd.dtb \
> -	imx6q-sabreauto.dtb
> +	imx6q-sabreauto.dtb \
> +	imx6q-sabresd.dtb
>  
>  dtb-$(CONFIG_MX6SL) += imx6sl-evk.dtb
>  
> diff --git a/arch/arm/dts/imx6q-sabresd.dts
> b/arch/arm/dts/imx6q-sabresd.dts new file mode 100644
> index 0000000..d9cdb20
> --- /dev/null
> +++ b/arch/arm/dts/imx6q-sabresd.dts
> @@ -0,0 +1,92 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright 2012=2015 Freescale Semiconductor, Inc.
> + * Copyright 2011 Linaro Ltd.
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +/dts-v1/;
> +
> +#include "imx6q.dtsi"
> +#include "imx6qdl-sabresd.dtsi"
> +
> +/ {
> +	model = "Freescale i.MX6 Quad SABRE Smart Device Board";
> +	compatible = "fsl,imx6q-sabresd", "fsl,imx6q";
> +};
> +
> +/ {
> +	soc {
> +		u-boot,dm-spl;
> +
> +		aips-bus at 02000000 {
> +			u-boot,dm-spl;
> +		};
> +
> +		aips-bus at 02100000 {
> +			u-boot,dm-spl;
> +		};
> +	};
> +};
> +
> +&gpio1 {
> +	u-boot,dm-spl;
> +};
> +
> +&gpio2 {
> +	u-boot,dm-spl;
> +};
> +
> +&gpio6 {
> +	u-boot,dm-spl;
> +};
> +
> +&gpio1 {
> +	u-boot,dm-spl;
> +};
> +
> +&iomuxc {
> +	u-boot,dm-spl;
> +};
> +
> +&battery {
> +	offset-charger = <1900>;
> +	offset-discharger = <1694>;
> +	offset-usb-charger = <1685>;
> +};
> +
> +&ldb {
> +	lvds-channel at 0 {
> +		crtc = "ipu2-di0";
> +	};
> +
> +	lvds-channel at 1 {
> +		crtc = "ipu2-di1";
> +	};
> +};
> +
> +&mxcfb1 {
> +	status = "okay";
> +};
> +
> +&mxcfb2 {
> +	status = "okay";
> +};
> +
> +&mxcfb3 {
> +	status = "okay";
> +};
> +
> +&mxcfb4 {
> +	status = "okay";
> +};
> +
> +&sata {
> +	status = "okay";
> +};
> diff --git a/arch/arm/dts/imx6qdl-sabresd.dtsi
> b/arch/arm/dts/imx6qdl-sabresd.dtsi new file mode 100644
> index 0000000..09b2591
> --- /dev/null
> +++ b/arch/arm/dts/imx6qdl-sabresd.dtsi
> @@ -0,0 +1,1065 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright 2012-2016 Freescale Semiconductor, Inc.
> + * Copyright 2011 Linaro Ltd.
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +
> +/ {
> +	aliases {
> +		mxcfb0 = &mxcfb1;
> +		mxcfb1 = &mxcfb2;
> +		mxcfb2 = &mxcfb3;
> +		mxcfb3 = &mxcfb4;
> +		mmc1 = &usdhc3;
> +	};
> +
> +	battery: max8903 at 0 {
> +		compatible = "fsl,max8903-charger";
> +		pinctrl-names = "default";
> +		dok_input = <&gpio2 24 1>;
> +		uok_input = <&gpio1 27 1>;
> +		chg_input = <&gpio3 23 1>;
> +		flt_input = <&gpio5 2 1>;
> +		fsl,dcm_always_high;
> +		fsl,dc_valid;
> +		fsl,usb_valid;
> +		status = "okay";
> +	};
> +
> +	hannstar_cabc {
> +		compatible = "hannstar,cabc";
> +		lvds0 {
> +			gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
> +		};
> +		lvds1 {
> +			gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
> +		};
> +	};
> +
> +	chosen {
> +		stdout-path = &uart1;
> +	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +
> +		charger-led {
> +			gpios = <&gpio1 2 0>;
> +			linux,default-trigger =
> "max8903-charger-charging";
> +			retain-state-suspended;
> +		};
> +	};
> +
> +	memory: memory {
> +		reg = <0x10000000 0x40000000>;
> +	};
> +
> +	regulators {
> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		reg_usb_otg_vbus: regulator at 0 {
> +			compatible = "regulator-fixed";
> +			reg = <0>;
> +			regulator-name = "usb_otg_vbus";
> +			regulator-min-microvolt = <5000000>;
> +			regulator-max-microvolt = <5000000>;
> +			gpio = <&gpio3 22 0>;
> +			enable-active-high;
> +			vin-supply = <&swbst_reg>;
> +		};
> +
> +		reg_usb_h1_vbus: regulator at 1 {
> +			compatible = "regulator-fixed";
> +			reg = <1>;
> +			regulator-name = "usb_h1_vbus";
> +			regulator-min-microvolt = <5000000>;
> +			regulator-max-microvolt = <5000000>;
> +			gpio = <&gpio1 29 0>;
> +			enable-active-high;
> +			vin-supply = <&swbst_reg>;
> +		};
> +
> +		reg_audio: regulator at 2 {
> +			compatible = "regulator-fixed";
> +			reg = <2>;
> +			regulator-name = "wm8962-supply";
> +			gpio = <&gpio4 10 0>;
> +			enable-active-high;
> +		};
> +
> +		reg_pcie: regulator at 3 {
> +			compatible = "regulator-fixed";
> +			reg = <3>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_pcie_reg>;
> +			regulator-name = "MPCIE_3V3";
> +			regulator-min-microvolt = <3300000>;
> +			regulator-max-microvolt = <3300000>;
> +			gpio = <&gpio3 19 0>;
> +			regulator-always-on;
> +			enable-active-high;
> +		};
> +
> +		reg_sensor: regulator at 4 {
> +			compatible = "regulator-fixed";
> +			reg = <4>;
> +			regulator-name = "sensor-supply";
> +			regulator-min-microvolt = <3300000>;
> +			regulator-max-microvolt = <3300000>;
> +			gpio = <&gpio2 31 0>;
> +			startup-delay-us = <500>;
> +			enable-active-high;
> +		};
> +
> +		reg_hdmi: regulator at 5 {
> +			compatible = "regulator-fixed";
> +			reg = <5>;
> +			regulator-name = "hdmi-5v-supply";
> +			regulator-min-microvolt = <5000000>;
> +			regulator-max-microvolt = <5000000>;
> +			enable-active-high;
> +			hdmi-5v-supply = <&swbst_reg>;
> +		};
> +
> +		reg_mipi_dsi_pwr_on: mipi_dsi_pwr_on {
> +			compatible = "regulator-fixed";
> +			regulator-name = "mipi_dsi_pwr_on";
> +			gpio = <&gpio6 14 0>;
> +			enable-active-high;
> +		};
> +	};
> +
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_gpio_keys>;
> +
> +		power {
> +			label = "Power Button";
> +			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
> +			gpio-key,wakeup;
> +			linux,code = <KEY_POWER>;
> +		};
> +
> +		volume-up {
> +			label = "Volume Up";
> +			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
> +			gpio-key,wakeup;
> +			linux,code = <KEY_VOLUMEUP>;
> +		};
> +
> +		volume-down {
> +			label = "Volume Down";
> +			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
> +			gpio-key,wakeup;
> +			linux,code = <KEY_VOLUMEDOWN>;
> +		};
> +	};
> +
> +	sound {
> +		compatible = "fsl,imx6q-sabresd-wm8962",
> +			   "fsl,imx-audio-wm8962";
> +		model = "wm8962-audio";
> +		cpu-dai = <&ssi2>;
> +		audio-codec = <&codec>;
> +		asrc-controller = <&asrc>;
> +		audio-routing =
> +			"Headphone Jack", "HPOUTL",
> +			"Headphone Jack", "HPOUTR",
> +			"Ext Spk", "SPKOUTL",
> +			"Ext Spk", "SPKOUTR",
> +			"AMIC", "MICBIAS",
> +			"IN3R", "AMIC",
> +			"DMIC", "MICBIAS",
> +			"DMICDAT", "DMIC",
> +			"CPU-Playback", "ASRC-Playback",
> +			"Playback", "CPU-Playback",
> +			"ASRC-Capture", "CPU-Capture",
> +			"CPU-Capture", "Capture";
> +		mux-int-port = <2>;
> +		mux-ext-port = <3>;
> +		codec-master;
> +		hp-det-gpios = <&gpio7 8 1>;
> +		mic-det-gpios = <&gpio1 9 1>;
> +	};
> +
> +	mxcfb1: fb at 0 {
> +		compatible = "fsl,mxc_sdc_fb";
> +		disp_dev = "ldb";
> +		interface_pix_fmt = "RGB666";
> +		default_bpp = <16>;
> +		int_clk = <0>;
> +		late_init = <0>;
> +		status = "disabled";
> +	};
> +
> +	mxcfb2: fb at 1 {
> +		compatible = "fsl,mxc_sdc_fb";
> +		disp_dev = "hdmi";
> +		interface_pix_fmt = "RGB24";
> +		mode_str ="1920x1080M at 60";
> +		default_bpp = <24>;
> +		int_clk = <0>;
> +		late_init = <0>;
> +		status = "disabled";
> +	};
> +
> +	mxcfb3: fb at 2 {
> +		compatible = "fsl,mxc_sdc_fb";
> +		disp_dev = "lcd";
> +		interface_pix_fmt = "RGB565";
> +		mode_str ="CLAA-WVGA";
> +		default_bpp = <16>;
> +		int_clk = <0>;
> +		late_init = <0>;
> +		status = "disabled";
> +	};
> +
> +	mxcfb4: fb at 3 {
> +		compatible = "fsl,mxc_sdc_fb";
> +		disp_dev = "ldb";
> +		interface_pix_fmt = "RGB666";
> +		default_bpp = <16>;
> +		int_clk = <0>;
> +		late_init = <0>;
> +		status = "disabled";
> +	};
> +
> +	lcd at 0 {
> +		compatible = "fsl,lcd";
> +		ipu_id = <0>;
> +		disp_id = <0>;
> +		default_ifmt = "RGB565";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_ipu1>;
> +		status = "okay";
> +	};
> +
> +	backlight {
> +		compatible = "pwm-backlight";
> +		pwms = <&pwm1 0 5000000>;
> +		brightness-levels = <0 4 8 16 32 64 128 255>;
> +		default-brightness-level = <7>;
> +		status = "okay";
> +	};
> +
> +	v4l2_cap_0 {
> +		compatible = "fsl,imx6q-v4l2-capture";
> +		ipu_id = <0>;
> +		csi_id = <0>;
> +		mclk_source = <0>;
> +		status = "okay";
> +	};
> +
> +	v4l2_cap_1 {
> +		compatible = "fsl,imx6q-v4l2-capture";
> +		ipu_id = <0>;
> +		csi_id = <1>;
> +		mclk_source = <0>;
> +		status = "okay";
> +	};
> +
> +	v4l2_out {
> +		compatible = "fsl,mxc_v4l2_output";
> +		status = "okay";
> +	};
> +
> +	mipi_dsi_reset: mipi-dsi-reset {
> +		compatible = "gpio-reset";
> +		reset-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
> +		reset-delay-us = <50>;
> +		#reset-cells = <0>;
> +	};
> +};
> +
> +&audmux {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_audmux>;
> +	status = "okay";
> +};
> +
> +&cpu0 {
> +	arm-supply = <&sw1a_reg>;
> +	soc-supply = <&sw1c_reg>;
> +};
> +
> +&clks {
> +	fsl,ldb-di0-parent = <&clks IMX6QDL_CLK_PLL2_PFD0_352M>;
> +	fsl,ldb-di1-parent = <&clks IMX6QDL_CLK_PLL2_PFD0_352M>;
> +};
> +
> +&ecspi1 {
> +	fsl,spi-num-chipselects = <1>;
> +	cs-gpios = <&gpio4 9 0>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_ecspi1>;
> +	status = "okay";
> +
> +	flash: m25p80 at 0 {
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		compatible = "st,m25p32";
> +		spi-max-frequency = <20000000>;
> +		reg = <0>;
> +	};
> +};
> +
> +&fec {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_enet>;
> +	phy-mode = "rgmii";
> +	phy-reset-gpios = <&gpio1 25 0>;
> +	fsl,magic-packet;
> +	status = "okay";
> +};
> +
> +&gpc {
> +	fsl,ldo-bypass = <1>;
> +};
> +
> +&dcic1 {
> +	dcic_id = <0>;
> +	dcic_mux = "dcic-hdmi";
> +	status = "okay";
> +};
> +
> +&dcic2 {
> +	dcic_id = <1>;
> +	dcic_mux = "dcic-lvds1";
> +	status = "okay";
> +};
> +
> +&i2c1 {
> +	clock-frequency = <100000>;
> +	pinctrl-names = "default", "gpio";
> +	pinctrl-0 = <&pinctrl_i2c1>;
> +	pinctrl-1 = <&pinctrl_i2c1_gpio>;
> +	scl-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;
> +	sda-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>;
> +	status = "okay";
> +
> +	codec: wm8962 at 1a {
> +		compatible = "wlf,wm8962";
> +		reg = <0x1a>;
> +		clocks = <&clks IMX6QDL_CLK_CKO>;
> +		DCVDD-supply = <&reg_audio>;
> +		DBVDD-supply = <&reg_audio>;
> +		AVDD-supply = <&reg_audio>;
> +		CPVDD-supply = <&reg_audio>;
> +		MICVDD-supply = <&reg_audio>;
> +		PLLVDD-supply = <&reg_audio>;
> +		SPKVDD1-supply = <&reg_audio>;
> +		SPKVDD2-supply = <&reg_audio>;
> +		gpio-cfg = <
> +			0x0000 /* 0:Default */
> +			0x0000 /* 1:Default */
> +			0x0013 /* 2:FN_DMICCLK */
> +			0x0000 /* 3:Default */
> +			0x8014 /* 4:FN_DMICCDAT */
> +			0x0000 /* 5:Default */
> +		>;
> +		amic-mono;
> +       };
> +
> +	mma8451 at 1c {
> +		compatible = "fsl,mma8451";
> +		reg = <0x1c>;
> +		position = <0>;
> +		vdd-supply = <&reg_sensor>;
> +		vddio-supply = <&reg_sensor>;
> +		interrupt-parent = <&gpio1>;
> +		interrupts = <18 8>;
> +		interrupt-route = <1>;
> +	};
> +
> +	ov564x: ov564x at 3c {
> +		compatible = "ovti,ov564x";
> +		reg = <0x3c>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_ipu1_2>;
> +		clocks = <&clks IMX6QDL_CLK_CKO>;
> +		clock-names = "csi_mclk";
> +		DOVDD-supply = <&vgen4_reg>; /* 1.8v */
> +		AVDD-supply = <&vgen3_reg>;  /* 2.8v, on rev C board
> is VGEN3,
> +						on rev B board is
> VGEN5 */
> +		DVDD-supply = <&vgen2_reg>;  /* 1.5v*/
> +		pwn-gpios = <&gpio1 16 1>;   /* active low: SD1_DAT0
> */
> +		rst-gpios = <&gpio1 17 0>;   /* active high:
> SD1_DAT1 */
> +		csi_id = <0>;
> +		mclk = <24000000>;
> +		mclk_source = <0>;
> +	};
> +};
> +
> +&i2c2 {
> +	clock-frequency = <100000>;
> +	pinctrl-names = "default", "gpio";
> +	pinctrl-0 = <&pinctrl_i2c2>;
> +	pinctrl-1 = <&pinctrl_i2c2_gpio>;
> +	scl-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
> +	sda-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
> +	status = "okay";
> +
> +	egalax_ts at 04 {
> +		compatible = "eeti,egalax_ts";
> +		reg = <0x04>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_i2c2_egalax_int>;
> +		interrupt-parent = <&gpio6>;
> +		interrupts = <8 2>;
> +		wakeup-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
> +	};
> +
> +	max11801 at 48 {
> +		compatible = "maxim,max11801";
> +		reg = <0x48>;
> +		interrupt-parent = <&gpio3>;
> +		interrupts = <26 2>;
> +		work-mode = <1>;/*DCM mode*/
> +	};
> +
> +	pmic: pfuze100 at 08 {
> +		compatible = "fsl,pfuze100";
> +		reg = <0x08>;
> +
> +		regulators {
> +			sw1a_reg: sw1ab {
> +				regulator-min-microvolt = <300000>;
> +				regulator-max-microvolt = <1875000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +				regulator-ramp-delay = <6250>;
> +			};
> +
> +			sw1c_reg: sw1c {
> +				regulator-min-microvolt = <300000>;
> +				regulator-max-microvolt = <1875000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +				regulator-ramp-delay = <6250>;
> +			};
> +
> +			sw2_reg: sw2 {
> +				regulator-min-microvolt = <800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +				regulator-ramp-delay = <6250>;
> +			};
> +
> +			sw3a_reg: sw3a {
> +				regulator-min-microvolt = <400000>;
> +				regulator-max-microvolt = <1975000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			sw3b_reg: sw3b {
> +				regulator-min-microvolt = <400000>;
> +				regulator-max-microvolt = <1975000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			sw4_reg: sw4 {
> +				regulator-min-microvolt = <800000>;
> +				regulator-max-microvolt = <3300000>;
> +			};
> +
> +			swbst_reg: swbst {
> +				regulator-min-microvolt = <5000000>;
> +				regulator-max-microvolt = <5150000>;
> +			};
> +
> +			snvs_reg: vsnvs {
> +				regulator-min-microvolt = <1000000>;
> +				regulator-max-microvolt = <3000000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			vref_reg: vrefddr {
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			vgen1_reg: vgen1 {
> +				regulator-min-microvolt = <800000>;
> +				regulator-max-microvolt = <1550000>;
> +			};
> +
> +			vgen2_reg: vgen2 {
> +				regulator-min-microvolt = <800000>;
> +				regulator-max-microvolt = <1550000>;
> +			};
> +
> +			vgen3_reg: vgen3 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +			};
> +
> +			vgen4_reg: vgen4 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +			};
> +
> +			vgen5_reg: vgen5 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +			};
> +
> +			vgen6_reg: vgen6 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +			};
> +		};
> +	};
> +
> +	ov564x_mipi: ov564x_mipi at 3c { /* i2c2 driver */
> +		compatible = "ovti,ov564x_mipi";
> +		reg = <0x3c>;
> +		clocks = <&clks 201>;
> +		clock-names = "csi_mclk";
> +		DOVDD-supply = <&vgen4_reg>; /* 1.8v */
> +		AVDD-supply = <&vgen3_reg>;  /* 2.8v, rev C board is
> VGEN3
> +						rev B board is VGEN5
> */
> +		DVDD-supply = <&vgen2_reg>;  /* 1.5v*/
> +		pwn-gpios = <&gpio1 19 1>;   /* active low: SD1_CLK
> */
> +		rst-gpios = <&gpio1 20 0>;   /* active high:
> SD1_DAT2 */
> +		csi_id = <1>;
> +		mclk = <24000000>;
> +		mclk_source = <0>;
> +	};
> +};
> +
> +&i2c3 {
> +	clock-frequency = <100000>;
> +	pinctrl-names = "default", "gpio";
> +	pinctrl-0 = <&pinctrl_i2c3>;
> +	pinctrl-1 = <&pinctrl_i2c3_gpio>;
> +	scl-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
> +	sda-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
> +	status = "okay";
> +
> +	egalax_ts at 04 {
> +		compatible = "eeti,egalax_ts";
> +		reg = <0x04>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_i2c3_egalax_int>;
> +		interrupt-parent = <&gpio6>;
> +		interrupts = <7 2>;
> +		wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
> +	};
> +
> +	isl29023 at 44 {
> +		compatible = "fsl,isl29023";
> +		reg = <0x44>;
> +		rext = <499>;
> +		vdd-supply = <&reg_sensor>;
> +		interrupt-parent = <&gpio3>;
> +		interrupts = <9 2>;
> +	};
> +
> +	mag3110 at 0e {
> +		compatible = "fsl,mag3110";
> +		reg = <0x0e>;
> +		position = <2>;
> +		vdd-supply = <&reg_sensor>;
> +		vddio-supply = <&reg_sensor>;
> +		interrupt-parent = <&gpio3>;
> +		interrupts = <16 1>;
> +	};
> +};
> +
> +&iomuxc {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_hog>;
> +
> +	imx6qdl-sabresd {
> +		pinctrl_hog: hoggrp {
> +			fsl,pins = <
> +				MX6QDL_PAD_NANDF_D0__GPIO2_IO00
> 0x80000000
> +				MX6QDL_PAD_NANDF_D1__GPIO2_IO01
> 0x80000000
> +				MX6QDL_PAD_NANDF_D2__GPIO2_IO02
> 0x80000000
> +				MX6QDL_PAD_NANDF_D3__GPIO2_IO03
> 0x80000000
> +				MX6QDL_PAD_GPIO_0__CCM_CLKO1
> 0x130b0
> +				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29
> 0x80000000
> +				MX6QDL_PAD_EIM_D22__GPIO3_IO22
> 0x80000000
> +				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25
> 0x80000000
> +				MX6QDL_PAD_EIM_D26__GPIO3_IO26
> 0x80000000
> +				MX6QDL_PAD_EIM_CS1__GPIO2_IO24
> 0x80000000
> +				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27
> 0x80000000
> +				MX6QDL_PAD_EIM_A25__GPIO5_IO02
> 0x80000000
> +				MX6QDL_PAD_EIM_D23__GPIO3_IO23
> 0x80000000
> +				MX6QDL_PAD_EIM_EB3__GPIO2_IO31
> 0x80000000
> +				MX6QDL_PAD_SD1_CMD__GPIO1_IO18
> 0x80000000
> +				MX6QDL_PAD_EIM_D16__GPIO3_IO16
> 0x80000000
> +
> MX6QDL_PAD_SD3_RST__GPIO7_IO08	0x80000000
> +				MX6QDL_PAD_GPIO_9__GPIO1_IO09
> 0x80000000
> +				MX6QDL_PAD_EIM_DA9__GPIO3_IO09
> 0x80000000
> +				MX6QDL_PAD_NANDF_CS0__GPIO6_IO11
> 0x80000000
> +				MX6QDL_PAD_NANDF_CS1__GPIO6_IO14
> 0x80000000
> +				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15
> 0x80000000
> +				MX6QDL_PAD_NANDF_CS3__GPIO6_IO16
> 0x80000000
> +			>;
> +		};
> +
> +		pinctrl_audmux: audmuxgrp {
> +			fsl,pins = <
> +
> MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
> +
> MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
> +
> MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
> +
> MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
> +			>;
> +		};
> +
> +		pinctrl_ecspi1: ecspi1grp {
> +			fsl,pins = <
> +
> MX6QDL_PAD_KEY_COL1__ECSPI1_MISO	0x100b1
> +
> MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI	0x100b1
> +
> MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK	0x100b1
> +
> MX6QDL_PAD_KEY_ROW1__GPIO4_IO09		0x1b0b0
> +			>;
> +		};
> +
> +		pinctrl_i2c2_egalax_int: egalax_i2c2_intgrp {
> +			fsl,pins = <
> +				MX6QDL_PAD_NANDF_ALE__GPIO6_IO08
> 0x80000000
> +			>;
> +		};
> +
> +		pinctrl_i2c3_egalax_int: egalax_i2c3_intgrp {
> +			fsl,pins = <
> +				MX6QDL_PAD_NANDF_CLE__GPIO6_IO07
> 0x80000000
> +			>;
> +		};
> +
> +		pinctrl_enet: enetgrp {
> +			fsl,pins = <
> +
> MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
> +
> MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
> +
> MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
> +
> MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
> +
> MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
> +
> MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
> +
> MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
> +
> MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
> +
> MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
> +
> MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
> +
> MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
> +
> MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
> +
> MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
> +
> MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
> +
> MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
> +
> MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
> +			>;
> +		};
> +
> +		pinctrl_enet_irq: enetirqgrp {
> +			fsl,pins = <
> +
> MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
> +			>;
> +		};
> +
> +		pinctrl_gpio_keys: gpio_keysgrp {
> +			fsl,pins = <
> +				MX6QDL_PAD_EIM_D29__GPIO3_IO29
> 0x1b0b0
> +				MX6QDL_PAD_GPIO_4__GPIO1_IO04
> 0x1b0b0
> +				MX6QDL_PAD_GPIO_5__GPIO1_IO05
> 0x1b0b0
> +			>;
> +		};
> +
> +		pinctrl_hdmi_cec: hdmicecgrp {
> +			fsl,pins = <
> +
> MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x108b0
> +			>;
> +		};
> +
> +		pinctrl_hdmi_hdcp: hdmihdcpgrp {
> +			fsl,pins = <
> +				MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL
> 0x4001b8b1
> +				MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA
> 0x4001b8b1
> +			>;
> +		};
> +
> +		pinctrl_i2c1: i2c1grp {
> +			fsl,pins = <
> +
> MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
> +
> MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
> +			>;
> +		};
> +
> +		pinctrl_i2c1_gpio: i2c1grp_gpio {
> +			fsl,pins = <
> +
> MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26        0x1b8b1
> +
> MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27        0x1b8b1
> +			>;
> +		};
> +
> +		pinctrl_i2c2: i2c2grp {
> +			fsl,pins = <
> +
> MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
> +
> MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
> +			>;
> +		};
> +
> +		pinctrl_i2c2_gpio: i2c2grp_gpio {
> +			fsl,pins = <
> +
> MX6QDL_PAD_KEY_COL3__GPIO4_IO12         0x1b8b1
> +
> MX6QDL_PAD_KEY_ROW3__GPIO4_IO13         0x1b8b1
> +			>;
> +		};
> +
> +		pinctrl_i2c3: i2c3grp {
> +			fsl,pins = <
> +
> MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
> +
> MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
> +			>;
> +		};
> +
> +		pinctrl_i2c3_gpio: i2c3grp_gpio {
> +			fsl,pins = <
> +
> MX6QDL_PAD_GPIO_3__GPIO1_IO03           0x1b8b1
> +
> MX6QDL_PAD_GPIO_6__GPIO1_IO06           0x1b8b1
> +			>;
> +		};
> +
> +		pinctrl_ipu1: ipu1grp {
> +			fsl,pins = <
> +
> MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
> +
> MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
> +
> MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
> +
> MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
> +
> MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04        0x80000000
> +
> MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
> +
> MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
> +
> MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
> +
> MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
> +
> MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
> +
> MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
> +
> MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
> +
> MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
> +
> MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
> +
> MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
> +
> MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
> +
> MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
> +
> MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
> +
> MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
> +
> MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
> +
> MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
> +
> MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
> +
> MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
> +
> MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
> +
> MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
> +
> MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
> +
> MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
> +
> MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
> +
> MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
> +			>;
> +		};
> +
> +		pinctrl_ipu1_2: ipu1grp-2 { /* parallel camera */
> +			fsl,pins = <
> +
> MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12    0x80000000
> +
> MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13    0x80000000
> +
> MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14    0x80000000
> +
> MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15    0x80000000
> +
> MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16    0x80000000
> +
> MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17    0x80000000
> +
> MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18    0x80000000
> +
> MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19    0x80000000
> +
> MX6QDL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN 0x80000000
> +
> MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK   0x80000000
> +
> MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC      0x80000000
> +
> MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC     0x80000000
> +
> MX6QDL_PAD_SD1_DAT1__GPIO1_IO17            0x80000000
> +
> MX6QDL_PAD_SD1_DAT0__GPIO1_IO16            0x80000000
> +			>;
> +		};
> +
> +		pinctrl_pcie: pciegrp {
> +			fsl,pins = <
> +
> MX6QDL_PAD_GPIO_17__GPIO7_IO12	0x1b0b0
> +			>;
> +		};
> +
> +		pinctrl_pcie_reg: pciereggrp {
> +			fsl,pins = <
> +
> MX6QDL_PAD_EIM_D19__GPIO3_IO19	0x1b0b0
> +			>;
> +		};
> +
> +		pinctrl_pwm1: pwm1grp {
> +			fsl,pins = <
> +
> MX6QDL_PAD_SD1_DAT3__PWM1_OUT		0x1b0b1
> +			>;
> +		};
> +
> +		pinctrl_uart1: uart1grp {
> +			fsl,pins = <
> +
> MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
> +
> MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
> +			>;
> +		};
> +
> +		pinctrl_uart5_1: uart5grp-1 {
> +			fsl,pins = <
> +
> MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
> +
> MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
> +
> MX6QDL_PAD_KEY_COL4__UART5_RTS_B	0x1b0b1
> +
> MX6QDL_PAD_KEY_ROW4__UART5_CTS_B	0x1b0b1
> +			>;
> +		};
> +
> +		pinctrl_uart5dte_1: uart5dtegrp-1 {
> +			fsl,pins = <
> +
> MX6QDL_PAD_KEY_ROW1__UART5_TX_DATA	0x1b0b1
> +
> MX6QDL_PAD_KEY_COL1__UART5_RX_DATA	0x1b0b1
> +
> MX6QDL_PAD_KEY_ROW4__UART5_RTS_B	0x1b0b1
> +
> MX6QDL_PAD_KEY_COL4__UART5_CTS_B	0x1b0b1
> +			>;
> +		};
> +
> +		pinctrl_usbotg: usbotggrp {
> +			fsl,pins = <
> +
> MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
> +			>;
> +		};
> +
> +		pinctrl_usdhc2: usdhc2grp {
> +			fsl,pins = <
> +
> MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
> +
> MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
> +
> MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
> +
> MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
> +
> MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
> +
> MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
> +
> MX6QDL_PAD_NANDF_D4__SD2_DATA4		0x17059
> +
> MX6QDL_PAD_NANDF_D5__SD2_DATA5		0x17059
> +
> MX6QDL_PAD_NANDF_D6__SD2_DATA6		0x17059
> +
> MX6QDL_PAD_NANDF_D7__SD2_DATA7		0x17059
> +			>;
> +		};
> +
> +		pinctrl_usdhc3: usdhc3grp {
> +			u-boot,dm-spl;
> +			fsl,pins = <
> +
> MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
> +
> MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
> +
> MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
> +
> MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
> +
> MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
> +
> MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
> +
> MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
> +
> MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
> +
> MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
> +
> MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
> +			>;
> +		};
> +
> +		pinctrl_usdhc4: usdhc4grp {
> +			fsl,pins = <
> +
> MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
> +
> MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
> +
> MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
> +
> MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
> +
> MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
> +
> MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
> +
> MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
> +
> MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
> +
> MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
> +
> MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
> +			>;
> +		};
> +
> +		pinctrl_wdog: wdoggrp {
> +			fsl,pins = <
> +				MX6QDL_PAD_GPIO_1__WDOG2_B 0x80000000
> +			>;
> +		};
> +	};
> +
> +	gpio_leds {
> +		pinctrl_gpio_leds: gpioledsgrp {
> +			fsl,pins = <
> +				MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
> +			>;
> +		};
> +	};
> +};
> +
> +&ldb {
> +	status = "okay";
> +
> +	lvds-channel at 0 {
> +		fsl,data-mapping = "spwg";
> +		fsl,data-width = <18>;
> +		status = "okay";
> +
> +		display-timings {
> +			native-mode = <&timing0>;
> +			timing0: hsd100pxn1 {
> +				clock-frequency = <65000000>;
> +				hactive = <1024>;
> +				vactive = <768>;
> +				hback-porch = <220>;
> +				hfront-porch = <40>;
> +				vback-porch = <21>;
> +				vfront-porch = <7>;
> +				hsync-len = <60>;
> +				vsync-len = <10>;
> +			};
> +		};
> +	};
> +
> +	lvds-channel at 1 {
> +		fsl,data-mapping = "spwg";
> +		fsl,data-width = <18>;
> +		primary;
> +		status = "okay";
> +
> +		display-timings {
> +			native-mode = <&timing1>;
> +			timing1: hsd100pxn1 {
> +				clock-frequency = <65000000>;
> +				hactive = <1024>;
> +				vactive = <768>;
> +				hback-porch = <220>;
> +				hfront-porch = <40>;
> +				vback-porch = <21>;
> +				vfront-porch = <7>;
> +				hsync-len = <60>;
> +				vsync-len = <10>;
> +			};
> +		};
> +	};
> +};
> +
> +&mipi_csi {
> +	status = "okay";
> +	ipu_id = <0>;
> +	csi_id = <1>;
> +	v_channel = <0>;
> +	lanes = <2>;
> +};
> +
> +&mipi_dsi {
> +	dev_id = <0>;
> +	disp_id = <1>;
> +	lcd_panel = "TRULY-WVGA";
> +	disp-power-on-supply = <&reg_mipi_dsi_pwr_on>;
> +	resets = <&mipi_dsi_reset>;
> +	status = "okay";
> +};
> +
> +&pcie {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_pcie>;
> +	reset-gpio = <&gpio7 12 0>;
> +	status = "okay";
> +};
> +
> +&pwm1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_pwm1>;
> +	status = "okay";
> +};
> +
> +&snvs_poweroff {
> +	status = "okay";
> +};
> +
> +&ssi2 {
> +	status = "okay";
> +};
> +
> +&uart1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart1>;
> +	status = "okay";
> +};
> +
> +&usbh1 {
> +	vbus-supply = <&reg_usb_h1_vbus>;
> +	status = "okay";
> +};
> +
> +&usbotg {
> +	vbus-supply = <&reg_usb_otg_vbus>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usbotg>;
> +	disable-over-current;
> +	srp-disable;
> +	hnp-disable;
> +	adp-disable;
> +	status = "okay";
> +};
> +
> +&usbphy1 {
> +	tx-d-cal = <0x5>;
> +};
> +
> +&usbphy2 {
> +	tx-d-cal = <0x5>;
> +};
> +
> +&usdhc2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usdhc2>;
> +	bus-width = <8>;
> +	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
> +	wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
> +	no-1-8-v;
> +	keep-power-in-suspend;
> +	enable-sdio-wakeup;
> +	status = "okay";
> +};
> +
> +&usdhc3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usdhc3>;
> +	bus-width = <8>;
> +	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
> +	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
> +	no-1-8-v;
> +	keep-power-in-suspend;
> +	enable-sdio-wakeup;
> +	u-boot,dm-spl;
> +	status = "okay";
> +};
> +
> +&usdhc4 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usdhc4>;
> +	bus-width = <8>;
> +	non-removable;
> +	no-1-8-v;
> +	keep-power-in-suspend;
> +	status = "okay";
> +};
> +
> +&wdog1 {
> +	status = "disabled";
> +};
> +
> +&wdog2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_wdog>;
> +	fsl,wdog_b;
> +	status = "okay";
> +};




Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190119/978aae66/attachment.sig>


More information about the U-Boot mailing list