[U-Boot] [PATCH v2 08/11] configs: colibri_imx7: enable CAAM driver

[Stefan Agner]

From: Stefan Agner <stefan.agner at toradex.com>

Access to CAAM in non-secure mode must be enabled by the boot
loader first. The U-Boot CAAM driver enables access to CAAM in
non-secure mode by default. Hence enable the CAAM driver to
allow Linux accessing CAAM directly. This prevents error
messages like the following on Linux boot:
  caam 30900000.caam: Entropy delay = 3200
  caam 30900000.caam: failed to acquire DECO 0
  caam 30900000.caam: failed to instantiate RNG

Signed-off-by: Stefan Agner <stefan.agner at toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
---

Changes in v2: None

 configs/colibri_imx7_defconfig | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/configs/colibri_imx7_defconfig b/configs/colibri_imx7_defconfig
index af976bab12..c6fd7f3f4e 100644
--- a/configs/colibri_imx7_defconfig
+++ b/configs/colibri_imx7_defconfig
@@ -2,9 +2,11 @@ CONFIG_ARM=y
 CONFIG_SYS_THUMB_BUILD=y
 CONFIG_ARCH_MX7=y
 CONFIG_SYS_TEXT_BASE=0x87800000
+CONFIG_SECURE_BOOT=y
 CONFIG_TARGET_COLIBRI_IMX7=y
 CONFIG_IMX_RDC=y
 CONFIG_IMX_BOOTAUX=y
+# CONFIG_CMD_DEKBLOB is not set
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/colibri_imx7/imximage.cfg,MX7D"
@@ -35,6 +37,7 @@ CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_BMP=y
 CONFIG_CMD_CACHE=y
+# CONFIG_CMD_HASH is not set
 CONFIG_CMD_EXT4=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
@@ -46,6 +49,7 @@ CONFIG_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="imx7-colibri-rawnand"
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_FSL_CAAM=y
 CONFIG_DFU_MMC=y
 CONFIG_DM_GPIO=y
 CONFIG_DM_I2C=y
-- 
2.20.1