[U-Boot] [PATCH 3/5] mtd: rawnand: denali: add reset handling
Miquel Raynal
miquel.raynal at bootlin.com
Mon Jan 28 09:33:31 UTC 2019
Hi Simon,
Simon Goldschmidt <simon.k.r.goldschmidt at gmail.com> wrote on Mon, 28
Jan 2019 10:30:12 +0100:
> Hi Miquel,
>
> On Mon, Jan 28, 2019 at 10:22 AM Miquel Raynal
> <miquel.raynal at bootlin.com> wrote:
> >
> > Hi Simon,
> >
> > Simon Goldschmidt <simon.k.r.goldschmidt at gmail.com> wrote on Mon, 28
> > Jan 2019 10:16:28 +0100:
> >
> > > Hi Miquel,
> > >
> > > On Mon, Jan 28, 2019 at 10:08 AM Miquel Raynal
> > > <miquel.raynal at bootlin.com> wrote:
> > > >
> > > > Hi Simon,
> > > >
> > > > Simon Goldschmidt <simon.k.r.goldschmidt at gmail.com> wrote on Fri, 25
> > > > Jan 2019 21:30:49 +0100:
> > > >
> > > > > This adds reset handling to the devicetree-enabled denalid nand driver.
> > > >
> > > > "Denali NAND driver"
> > >
> > > Right.
> > >
> > > >
> > > > >
> > > > > For backwards compatibility, only a warning is printed when failing to
> > > > > get reset handles.
> > > > >
> > > > > Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt at gmail.com>
> > > > > ---
> > > > >
> > > > > drivers/mtd/nand/raw/denali_dt.c | 8 ++++++++
> > > > > 1 file changed, 8 insertions(+)
> > > > >
> > > > > diff --git a/drivers/mtd/nand/raw/denali_dt.c b/drivers/mtd/nand/raw/denali_dt.c
> > > > > index d384b974df..21c4540637 100644
> > > > > --- a/drivers/mtd/nand/raw/denali_dt.c
> > > > > +++ b/drivers/mtd/nand/raw/denali_dt.c
> > > > > @@ -9,6 +9,7 @@
> > > > > #include <linux/io.h>
> > > > > #include <linux/ioport.h>
> > > > > #include <linux/printk.h>
> > > > > +#include <reset.h>
> > > > >
> > > > > #include "denali.h"
> > > > >
> > > > > @@ -64,6 +65,7 @@ static int denali_dt_probe(struct udevice *dev)
> > > > > const struct denali_dt_data *data;
> > > > > struct clk clk, clk_x, clk_ecc;
> > > > > struct resource res;
> > > > > + struct reset_ctl_bulk reset_bulk;
> > > > > int ret;
> > > > >
> > > > > data = (void *)dev_get_driver_data(dev);
> > > > > @@ -131,6 +133,12 @@ static int denali_dt_probe(struct udevice *dev)
> > > > > denali->clk_x_rate = 200000000;
> > > > > }
> > > > >
> > > > > + ret = reset_get_bulk(bus, &reset_bulk);
> > > > > + if (ret)
> > > > > + dev_warn(bus, "Cant' get reset: %d\n", ret);
> > > > > + else
> > > > > + reset_deassert_bulk(&reset_bulk);
> > > >
> > > > Where are reset_get_bulk/reset_deassert_bulk() defined?
> > >
> > > In reset.h. That's why I added this include (see above)...
> >
> > Yes but I guess it is something that will be merged in 5.1? Maybe I
> > will wait for the next release to take this one.
>
> You mean Linux 5.1, right? This patch is for U-Boot, not Linux.
My bad, I had SIEVE rules issues, the patch did not got flagged for
"U-Boot". Sorry for the misunderstanding.
Thanks,
Miquèl
More information about the U-Boot
mailing list