[U-Boot] [PATCH v2 10/22] arm: imx: Add FIT SPL its

[Peng Fan]

> -----Original Message-----
> From: Abel Vesa
> Sent: 2019年1月29日 19:35
> To: Tom Rini <trini at konsulko.com>; Fabio Estevam
> <fabio.estevam at nxp.com>; u-boot at lists.denx.de; dl-uboot-imx
> <uboot-imx at nxp.com>; Peng Fan <peng.fan at nxp.com>
> Cc: Nitin Garg <nitin.garg at nxp.com>; Abel Vesa <abel.vesa at nxp.com>
> Subject: [PATCH v2 10/22] arm: imx: Add FIT SPL its
> 
> Add simple its in order to allow SPL to boot u-boot proper via FIT table.
> 
> Signed-off-by: Abel Vesa <abel.vesa at nxp.com>
> ---
>  arch/arm/mach-imx/mx6/fit_spl.its | 41
> +++++++++++++++++++++++++++++++++++++++
>  1 file changed, 41 insertions(+)
>  create mode 100644 arch/arm/mach-imx/mx6/fit_spl.its
> 
> diff --git a/arch/arm/mach-imx/mx6/fit_spl.its
> b/arch/arm/mach-imx/mx6/fit_spl.its
> new file mode 100644
> index 0000000..bf3ffee
> --- /dev/null
> +++ b/arch/arm/mach-imx/mx6/fit_spl.its
> @@ -0,0 +1,41 @@
> +/*
> + * Copyright (C) 2018 NXP
> + *
> + * Simple U-boot fit source file containing U-Boot (with dtb appended)
> +*/
> +
> +/dts-v1/;
> +
> +/ {
> +	description = "Image for u-boot proper (with dtb appended)";
> +	#address-cells = <1>;
> +
> +	images {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		uboot at 1 {
> +			reg = <0>;
> +			description = "U-Boot";
> +			data = /incbin/("../../../../u-boot-fit-dtb.bin");
> +			type = "standalone";
> +			os = "U-Boot";
> +			compression = "none";
> +			arch = "arm";
> +			load = <0x17800000>;
> +		};
> +	};
> +
> +	configurations {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		default = "conf at 1";
> +
> +		conf at 1 {
> +			reg = <0>;
> +			description = "i.MX armv7";
> +			loadables = "uboot at 1";
> +		};
> +	};
> +};

Reviewed-by: Peng Fan <peng.fan at nxp.com>

> --
> 2.7.4