[U-Boot] [U-Boot, v2] mmc: fsl_esdhc: Avoid infinite loop in esdhc_send_cmd_common()
Tom Rini
trini at konsulko.com
Mon Jan 14 16:28:13 UTC 2019
On Mon, Nov 19, 2018 at 10:31:53AM -0200, Fabio Estevam wrote:
> The following hang is observed on a Hummingboard 2 MicroSOM
> i2eX iMX6D - rev 1.3 with no eMMC populated on board:
>
> U-Boot SPL 2018.11+gf6206f8587 (Nov 16 2018 - 00:56:34 +0000)
> Trying to boot from MMC1
>
> U-Boot 2018.11+gf6206f8587 (Nov 16 2018 - 00:56:34 +0000)
>
> CPU: Freescale i.MX6D rev1.5 996 MHz (running at 792 MHz)
> CPU: Extended Commercial temperature grade (-20C to 105C) at 33C
> Reset cause: POR
> Board: MX6 HummingBoard2
> DRAM: 1 GiB
> MMC: FSL_SDHC: 0, FSL_SDHC: 1
> Loading Environment from MMC... *** Warning - bad CRC, using default environment
>
> No panel detected: default to HDMI
> Display: HDMI (1024x768)
> In: serial
> Out: serial
> Err: serial
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190114/bc4637fd/attachment.sig>
More information about the U-Boot
mailing list