[U-Boot] dm: pinctrl: Prevent (re-)configuring pins when already done before relocation

[Lukasz Majewski]

Hi Alex,

> On Thu, Dec 27, 2018 at 3:49 PM Tom Rini <trini at konsulko.com> wrote:
> >
> > On Tue, Dec 18, 2018 at 12:30:50PM +0100, Lukasz Majewski wrote:
> >  
> > > This commit prevents from re-configuring pins if those were
> > > configured before relocation.
> > >
> > > Some pins - like UART or DDR must be setup before relocation
> > > (as they have 'u-boot,dm-pre-reloc' property set in DTS). Without
> > > this change, those pins are re-configured after relocation
> > > (pre_reloc_only = 0, so we do not "continue").
> > > Such behavior may be a problem for DDR PAD configuration, as they
> > > might be already leveled/tuned with original setup).
> > >
> > > Signed-off-by: Lukasz Majewski <lukma at denx.de>  
> >
> > Applied to u-boot/master, thanks!
> >  
> 
> I've bisected out to this commit and it's slightly broken things for
> me on an AM3352. It all works fine so long as I boot MLO from MMC (so
> the MMC is probed, pinctrl setup), but if I boot from UART then I get
> to full U-Boot, MMC hasn't been probed and the pinmuxing isn't set up
> for the MMC.

I suppose that the pinmux node have set "u-boot,dm-pre-reloc"
property?

The problem is not with lack of eMMC probing - it is with pinctrl nodes
having "u-boot,dm-pre-reloc" set in DTS and the eMMC is probed after
MLO/SPL.
It looks like your use case implicitly depends on pinmux being
reconfigured no matter if we are pre-relocated (MLO) or afterwards.

As stated in the commit message above - for DDR pads it is dangerous to
re-configure them.

I'm wondering as in the device_probe() @ drivers/core/device.c the
DM_FLAG_ACTIVATED is checked. This should be enough to prevent
re-checking (of the DDR pins).

Anyway, this will not fix the issue you mentioned. 

I've put Simon to CC, maybe he would have some input?


Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190108/d6b09c05/attachment.sig>