[U-Boot] [PATCH v3 1/7] spl: Kconfig: Drop the _SUPPORT postfix from SPL_DFU
Andrew F. Davis
afd at ti.com
Thu Jan 17 19:43:02 UTC 2019
The symbol CONFIG_SPL_DFU_SUPPORT in SPL build has the same
meaning as CONFIG_DFU in regular U-Boot. Drop the _SUPPORT
to allow for cleaner use in code.
Signed-off-by: Andrew F. Davis <afd at ti.com>
Reviewed-by: Tom Rini <trini at konsulko.com>
---
arch/arm/cpu/armv8/zynqmp/spl.c | 2 +-
arch/arm/mach-omap2/boot-common.c | 2 +-
common/Makefile | 4 ++--
common/spl/Kconfig | 6 +++---
common/spl/Makefile | 2 +-
common/spl/spl_ram.c | 4 ++--
drivers/Makefile | 2 +-
drivers/usb/gadget/Makefile | 2 +-
include/configs/dra7xx_evm.h | 2 +-
include/configs/xilinx_zynqmp.h | 4 ++--
10 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/arch/arm/cpu/armv8/zynqmp/spl.c b/arch/arm/cpu/armv8/zynqmp/spl.c
index 01f31d0f0e..fb3955c93f 100644
--- a/arch/arm/cpu/armv8/zynqmp/spl.c
+++ b/arch/arm/cpu/armv8/zynqmp/spl.c
@@ -93,7 +93,7 @@ u32 spl_boot_device(void)
case EMMC_MODE:
return BOOT_DEVICE_MMC1;
#endif
-#ifdef CONFIG_SPL_DFU_SUPPORT
+#ifdef CONFIG_SPL_DFU
case USB_MODE:
return BOOT_DEVICE_DFU;
#endif
diff --git a/arch/arm/mach-omap2/boot-common.c b/arch/arm/mach-omap2/boot-common.c
index 176d4f67cb..2db19227b9 100644
--- a/arch/arm/mach-omap2/boot-common.c
+++ b/arch/arm/mach-omap2/boot-common.c
@@ -108,7 +108,7 @@ void save_omap_boot_params(void)
sys_boot_device = 1;
break;
#endif
-#if defined(BOOT_DEVICE_DFU) && !defined(CONFIG_SPL_DFU_SUPPORT)
+#if defined(BOOT_DEVICE_DFU) && !defined(CONFIG_SPL_DFU)
case BOOT_DEVICE_DFU:
sys_boot_device = 1;
break;
diff --git a/common/Makefile b/common/Makefile
index 0de60b3ced..3711016505 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -64,10 +64,10 @@ obj-$(CONFIG_$(SPL_TPL_)BOOTSTAGE) += bootstage.o
obj-$(CONFIG_$(SPL_TPL_)BLOBLIST) += bloblist.o
ifdef CONFIG_SPL_BUILD
-ifdef CONFIG_SPL_DFU_SUPPORT
+ifdef CONFIG_SPL_DFU
obj-$(CONFIG_DFU_OVER_USB) += dfu.o
endif
-obj-$(CONFIG_SPL_DFU_SUPPORT) += cli_hush.o
+obj-$(CONFIG_SPL_DFU) += cli_hush.o
obj-$(CONFIG_SPL_HASH_SUPPORT) += hash.o
obj-$(CONFIG_TPL_HASH_SUPPORT) += hash.o
obj-$(CONFIG_SPL_YMODEM_SUPPORT) += xyzModem.o
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 37ecbc6b1c..ce76dcfe2f 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -794,7 +794,7 @@ config SPL_USB_ETHER
since the network stack uses a number of environment variables.
See also SPL_NET_SUPPORT and SPL_ETH_SUPPORT.
-config SPL_DFU_SUPPORT
+config SPL_DFU
bool "Support DFU (Device Firmware Upgrade)"
select SPL_HASH_SUPPORT
select SPL_DFU_NO_RESET
@@ -809,11 +809,11 @@ config SPL_DFU_SUPPORT
choice
bool "DFU device selection"
- depends on SPL_DFU_SUPPORT
+ depends on SPL_DFU
config SPL_DFU_RAM
bool "RAM device"
- depends on SPL_DFU_SUPPORT && SPL_RAM_SUPPORT
+ depends on SPL_DFU && SPL_RAM_SUPPORT
help
select RAM/DDR memory device for loading binary images
(u-boot/kernel) to the selected device partition using
diff --git a/common/spl/Makefile b/common/spl/Makefile
index a130a5be4b..6f8d7599ae 100644
--- a/common/spl/Makefile
+++ b/common/spl/Makefile
@@ -26,7 +26,7 @@ obj-$(CONFIG_$(SPL_TPL_)USB_SUPPORT) += spl_usb.o
obj-$(CONFIG_$(SPL_TPL_)FAT_SUPPORT) += spl_fat.o
obj-$(CONFIG_$(SPL_TPL_)EXT_SUPPORT) += spl_ext.o
obj-$(CONFIG_$(SPL_TPL_)SATA_SUPPORT) += spl_sata.o
-obj-$(CONFIG_$(SPL_TPL_)DFU_SUPPORT) += spl_dfu.o
+obj-$(CONFIG_$(SPL_TPL_)DFU) += spl_dfu.o
obj-$(CONFIG_$(SPL_TPL_)SPI_LOAD) += spl_spi.o
obj-$(CONFIG_$(SPL_TPL_)RAM_SUPPORT) += spl_ram.o
obj-$(CONFIG_$(SPL_TPL_)USB_SDP_SUPPORT) += spl_sdp.o
diff --git a/common/spl/spl_ram.c b/common/spl/spl_ram.c
index 5fcc3b1504..954e91a004 100644
--- a/common/spl/spl_ram.c
+++ b/common/spl/spl_ram.c
@@ -35,7 +35,7 @@ static int spl_ram_load_image(struct spl_image_info *spl_image,
header = (struct image_header *)CONFIG_SPL_LOAD_FIT_ADDRESS;
-#if CONFIG_IS_ENABLED(DFU_SUPPORT)
+#if CONFIG_IS_ENABLED(DFU)
if (bootdev->boot_device == BOOT_DEVICE_DFU)
spl_dfu_cmd(0, "dfu_alt_info_ram", "ram", "0");
#endif
@@ -76,7 +76,7 @@ static int spl_ram_load_image(struct spl_image_info *spl_image,
#if CONFIG_IS_ENABLED(RAM_DEVICE)
SPL_LOAD_IMAGE_METHOD("RAM", 0, BOOT_DEVICE_RAM, spl_ram_load_image);
#endif
-#if CONFIG_IS_ENABLED(DFU_SUPPORT)
+#if CONFIG_IS_ENABLED(DFU)
SPL_LOAD_IMAGE_METHOD("DFU", 0, BOOT_DEVICE_DFU, spl_ram_load_image);
#endif
diff --git a/drivers/Makefile b/drivers/Makefile
index 4105864e2b..14543c7d6c 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -50,7 +50,7 @@ obj-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += usb/musb-new/
obj-$(CONFIG_SPL_USB_GADGET) += usb/gadget/
obj-$(CONFIG_SPL_USB_GADGET) += usb/common/
obj-$(CONFIG_SPL_USB_GADGET) += usb/gadget/udc/
-obj-$(CONFIG_SPL_DFU_SUPPORT) += dfu/
+obj-$(CONFIG_SPL_DFU) += dfu/
obj-$(CONFIG_SPL_WATCHDOG_SUPPORT) += watchdog/
obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += usb/host/
obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 01e2b3abf2..70f3bf43e7 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -8,7 +8,7 @@ obj-$(CONFIG_USB_ETHER) += epautoconf.o config.o usbstring.o
ifdef CONFIG_SPL_BUILD
obj-$(CONFIG_SPL_USB_GADGET) += g_dnl.o
-obj-$(CONFIG_SPL_DFU_SUPPORT) += f_dfu.o
+obj-$(CONFIG_SPL_DFU) += f_dfu.o
obj-$(CONFIG_SPL_USB_SDP_SUPPORT) += f_sdp.o
endif
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index 2d8758db75..f36a9c3e08 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -53,7 +53,7 @@
#ifdef CONFIG_SPL_BUILD
#undef CONFIG_CMD_BOOTD
-#ifdef CONFIG_SPL_DFU_SUPPORT
+#ifdef CONFIG_SPL_DFU
#define CONFIG_SPL_LOAD_FIT_ADDRESS 0x80200000
#define DFUARGS \
"dfu_bufsiz=0x10000\0" \
diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index 0ab32611ce..7a9b06ec4c 100644
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -183,7 +183,7 @@
#endif
/* SPL can't handle all huge variables - define just DFU */
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU_SUPPORT)
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU)
#undef CONFIG_EXTRA_ENV_SETTINGS
# define CONFIG_EXTRA_ENV_SETTINGS \
"dfu_alt_info_ram=uboot.bin ram 0x8000000 0x1000000;" \
@@ -228,7 +228,7 @@
# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#endif
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU_SUPPORT)
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU)
# undef CONFIG_CMD_BOOTD
# define CONFIG_SPL_ENV_SUPPORT
# define CONFIG_SPL_HASH_SUPPORT
--
2.19.1
More information about the U-Boot
mailing list