[U-Boot] [PATCH 08/13] arm: dts: k3: Add phy specific properties to SD card node

[Faiz Abbas]

With changes in the driver requiring phy related properties,
add the same for the SD card node to prevent breaking boot with
the driver update.

Signed-off-by: Faiz Abbas <faiz4000 at gmail.com>
---
 arch/arm/dts/k3-am654-base-board-u-boot.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
index f53fe463ac..95e3aad646 100644
--- a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
+++ b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
@@ -33,6 +33,8 @@
 		clocks = <&k3_clks 48 1>;
 		power-domains = <&k3_pds 48>;
 		max-frequency = <25000000>;
+		ti,otap-del-sel = <0x2>;
+		ti,trm-icp = <0x8>;
 	};
 
 };
@@ -129,4 +131,5 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc1_pins_default>;
 	sdhci-caps-mask = <0x7 0x0>;
+	ti,driver-strength-ohm = <50>;
 };
-- 
2.19.2