[U-Boot] [PATCH] mmc: fsl_esdhc: Move ifdef to CONFIG_IS_ENABLED

[Lukasz Majewski]

Hi Adam,

> For some boards, DM_REGULATOR and DM_GPIO may not be enabled in
> SPL but enabled in U-Boot.  So switching to CONFIG_IS_ENABLED from
> ifdef allows the esdhc driver to function with some limited
> functionality in SPL.
> 
> Signed-off-by: Adam Ford <aford173 at gmail.com>
> 
> diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
> index 74007e2ad4..1faae1987a 100644
> --- a/drivers/mmc/fsl_esdhc.c
> +++ b/drivers/mmc/fsl_esdhc.c
> @@ -1395,7 +1395,7 @@ static int fsl_esdhc_probe(struct udevice *dev)
>  	int node = dev_of_offset(dev);
>  	struct esdhc_soc_data *data =
>  		(struct esdhc_soc_data *)dev_get_driver_data(dev);
> -#ifdef CONFIG_DM_REGULATOR
> +#if CONFIG_IS_ENABLED(DM_REGULATOR)
>  	struct udevice *vqmmc_dev;
>  #endif
>  	fdt_addr_t addr;
> @@ -1436,7 +1436,7 @@ static int fsl_esdhc_probe(struct udevice *dev)
>  		priv->non_removable = 1;
>  	 } else {
>  		priv->non_removable = 0;
> -#ifdef CONFIG_DM_GPIO
> +#if CONFIG_IS_ENABLED(DM_GPIO)
>  		gpio_request_by_name(dev, "cd-gpios", 0,
> &priv->cd_gpio, GPIOD_IS_IN);
>  #endif
> @@ -1453,7 +1453,7 @@ static int fsl_esdhc_probe(struct udevice *dev)
>  
>  	priv->vs18_enable = 0;
>  
> -#ifdef CONFIG_DM_REGULATOR
> +#if CONFIG_IS_ENABLED(DM_REGULATOR)
>  	/*
>  	 * If emmc I/O has a fixed voltage at 1.8V, this must be
> provided,
>  	 * otherwise, emmc will work abnormally.

Reviewed-by: Lukasz Majewski <lukma at denx.de>


Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190110/b5576faa/attachment.sig>