[U-Boot] [PATCH v3 2/3] net: phy: ti: use generic helpers to access MMD registers
Carlo Caione
ccaione at baylibre.com
Wed Jan 23 16:05:51 UTC 2019
Now that generic helpers are available, use those instead of relying on
ti specific functions.
Signed-off-by: Carlo Caione <ccaione at baylibre.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean at nxp.com>
Acked-by: Joe Hershberger <joe.hershberger at ni.com>
---
drivers/net/phy/ti.c | 130 +++++++++----------------------------------
1 file changed, 25 insertions(+), 105 deletions(-)
diff --git a/drivers/net/phy/ti.c b/drivers/net/phy/ti.c
index 6db6edd0d0..6ac890a7f5 100644
--- a/drivers/net/phy/ti.c
+++ b/drivers/net/phy/ti.c
@@ -73,16 +73,6 @@
#define MII_DP83867_CFG2_SPEEDOPT_INTLOW 0x2000
#define MII_DP83867_CFG2_MASK 0x003F
-#define MII_MMD_CTRL 0x0d /* MMD Access Control Register */
-#define MII_MMD_DATA 0x0e /* MMD Access Data Register */
-
-/* MMD Access Control register fields */
-#define MII_MMD_CTRL_DEVAD_MASK 0x1f /* Mask MMD DEVAD*/
-#define MII_MMD_CTRL_ADDR 0x0000 /* Address */
-#define MII_MMD_CTRL_NOINCR 0x4000 /* no post increment */
-#define MII_MMD_CTRL_INCR_RDWT 0x8000 /* post increment on reads & writes */
-#define MII_MMD_CTRL_INCR_ON_WT 0xC000 /* post increment on writes only */
-
/* User setting - can be taken from DTS */
#define DEFAULT_RX_ID_DELAY DP83867_RGMIIDCTL_2_25_NS
#define DEFAULT_TX_ID_DELAY DP83867_RGMIIDCTL_2_75_NS
@@ -116,88 +106,20 @@ struct dp83867_private {
int clk_output_sel;
};
-/**
- * phy_read_mmd_indirect - reads data from the MMD registers
- * @phydev: The PHY device bus
- * @prtad: MMD Address
- * @devad: MMD DEVAD
- * @addr: PHY address on the MII bus
- *
- * Description: it reads data from the MMD registers (clause 22 to access to
- * clause 45) of the specified phy address.
- * To read these registers we have:
- * 1) Write reg 13 // DEVAD
- * 2) Write reg 14 // MMD Address
- * 3) Write reg 13 // MMD Data Command for MMD DEVAD
- * 3) Read reg 14 // Read MMD data
- */
-int phy_read_mmd_indirect(struct phy_device *phydev, int prtad,
- int devad, int addr)
-{
- int value = -1;
-
- /* Write the desired MMD Devad */
- phy_write(phydev, addr, MII_MMD_CTRL, devad);
-
- /* Write the desired MMD register address */
- phy_write(phydev, addr, MII_MMD_DATA, prtad);
-
- /* Select the Function : DATA with no post increment */
- phy_write(phydev, addr, MII_MMD_CTRL, (devad | MII_MMD_CTRL_NOINCR));
-
- /* Read the content of the MMD's selected register */
- value = phy_read(phydev, addr, MII_MMD_DATA);
- return value;
-}
-
-/**
- * phy_write_mmd_indirect - writes data to the MMD registers
- * @phydev: The PHY device
- * @prtad: MMD Address
- * @devad: MMD DEVAD
- * @addr: PHY address on the MII bus
- * @data: data to write in the MMD register
- *
- * Description: Write data from the MMD registers of the specified
- * phy address.
- * To write these registers we have:
- * 1) Write reg 13 // DEVAD
- * 2) Write reg 14 // MMD Address
- * 3) Write reg 13 // MMD Data Command for MMD DEVAD
- * 3) Write reg 14 // Write MMD data
- */
-void phy_write_mmd_indirect(struct phy_device *phydev, int prtad,
- int devad, int addr, u32 data)
-{
- /* Write the desired MMD Devad */
- phy_write(phydev, addr, MII_MMD_CTRL, devad);
-
- /* Write the desired MMD register address */
- phy_write(phydev, addr, MII_MMD_DATA, prtad);
-
- /* Select the Function : DATA with no post increment */
- phy_write(phydev, addr, MII_MMD_CTRL, (devad | MII_MMD_CTRL_NOINCR));
-
- /* Write the data into MMD's selected register */
- phy_write(phydev, addr, MII_MMD_DATA, data);
-}
-
static int dp83867_config_port_mirroring(struct phy_device *phydev)
{
struct dp83867_private *dp83867 =
(struct dp83867_private *)phydev->priv;
u16 val;
- val = phy_read_mmd_indirect(phydev, DP83867_CFG4, DP83867_DEVADDR,
- phydev->addr);
+ val = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4);
if (dp83867->port_mirroring == DP83867_PORT_MIRRORING_EN)
val |= DP83867_CFG4_PORT_MIRROR_EN;
else
val &= ~DP83867_CFG4_PORT_MIRROR_EN;
- phy_write_mmd_indirect(phydev, DP83867_CFG4, DP83867_DEVADDR,
- phydev->addr, val);
+ phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4, val);
return 0;
}
@@ -257,13 +179,13 @@ static int dp83867_of_init(struct phy_device *phydev)
/* Clock output selection if muxing property is set */
if (dp83867->clk_output_sel != DP83867_CLK_O_SEL_REF_CLK) {
- val = phy_read_mmd_indirect(phydev, DP83867_IO_MUX_CFG,
- DP83867_DEVADDR, phydev->addr);
+ val = phy_read_mmd(phydev, DP83867_DEVADDR,
+ DP83867_IO_MUX_CFG);
val &= ~DP83867_IO_MUX_CFG_CLK_O_SEL_MASK;
val |= (dp83867->clk_output_sel <<
DP83867_IO_MUX_CFG_CLK_O_SEL_SHIFT);
- phy_write_mmd_indirect(phydev, DP83867_IO_MUX_CFG,
- DP83867_DEVADDR, phydev->addr, val);
+ phy_write_mmd(phydev, DP83867_DEVADDR,
+ DP83867_IO_MUX_CFG, val);
}
return 0;
@@ -308,11 +230,11 @@ static int dp83867_config(struct phy_device *phydev)
/* Mode 1 or 2 workaround */
if (dp83867->rxctrl_strap_quirk) {
- val = phy_read_mmd_indirect(phydev, DP83867_CFG4,
- DP83867_DEVADDR, phydev->addr);
+ val = phy_read_mmd(phydev, DP83867_DEVADDR,
+ DP83867_CFG4);
val &= ~BIT(7);
- phy_write_mmd_indirect(phydev, DP83867_CFG4,
- DP83867_DEVADDR, phydev->addr, val);
+ phy_write_mmd(phydev, DP83867_DEVADDR,
+ DP83867_CFG4, val);
}
if (phy_interface_is_rgmii(phydev)) {
@@ -332,8 +254,8 @@ static int dp83867_config(struct phy_device *phydev)
* register's bit 11 (marked as RESERVED).
*/
- bs = phy_read_mmd_indirect(phydev, DP83867_STRAP_STS1,
- DP83867_DEVADDR, phydev->addr);
+ bs = phy_read_mmd(phydev, DP83867_DEVADDR,
+ DP83867_STRAP_STS1);
val = phy_read(phydev, MDIO_DEVAD_NONE, MII_DP83867_PHYCTRL);
if (bs & DP83867_STRAP_STS1_RESERVED) {
val &= ~DP83867_PHYCR_RESERVED_MASK;
@@ -354,8 +276,8 @@ static int dp83867_config(struct phy_device *phydev)
MII_DP83867_CFG2_SPEEDOPT_INTLOW);
phy_write(phydev, MDIO_DEVAD_NONE, MII_DP83867_CFG2, cfg2);
- phy_write_mmd_indirect(phydev, DP83867_RGMIICTL,
- DP83867_DEVADDR, phydev->addr, 0x0);
+ phy_write_mmd(phydev, DP83867_DEVADDR,
+ DP83867_RGMIICTL, 0x0);
phy_write(phydev, MDIO_DEVAD_NONE, MII_DP83867_PHYCTRL,
DP83867_PHYCTRL_SGMIIEN |
@@ -367,8 +289,8 @@ static int dp83867_config(struct phy_device *phydev)
}
if (phy_interface_is_rgmii(phydev)) {
- val = phy_read_mmd_indirect(phydev, DP83867_RGMIICTL,
- DP83867_DEVADDR, phydev->addr);
+ val = phy_read_mmd(phydev, DP83867_DEVADDR,
+ DP83867_RGMIICTL);
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
val |= (DP83867_RGMII_TX_CLK_DELAY_EN |
@@ -380,26 +302,24 @@ static int dp83867_config(struct phy_device *phydev)
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
val |= DP83867_RGMII_RX_CLK_DELAY_EN;
- phy_write_mmd_indirect(phydev, DP83867_RGMIICTL,
- DP83867_DEVADDR, phydev->addr, val);
+ phy_write_mmd(phydev, DP83867_DEVADDR,
+ DP83867_RGMIICTL, val);
delay = (dp83867->rx_id_delay |
(dp83867->tx_id_delay << DP83867_RGMII_TX_CLK_DELAY_SHIFT));
- phy_write_mmd_indirect(phydev, DP83867_RGMIIDCTL,
- DP83867_DEVADDR, phydev->addr, delay);
+ phy_write_mmd(phydev, DP83867_DEVADDR,
+ DP83867_RGMIIDCTL, delay);
if (dp83867->io_impedance >= 0) {
- val = phy_read_mmd_indirect(phydev,
- DP83867_IO_MUX_CFG,
- DP83867_DEVADDR,
- phydev->addr);
+ val = phy_read_mmd(phydev,
+ DP83867_DEVADDR,
+ DP83867_IO_MUX_CFG);
val &= ~DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL;
val |= dp83867->io_impedance &
DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL;
- phy_write_mmd_indirect(phydev, DP83867_IO_MUX_CFG,
- DP83867_DEVADDR, phydev->addr,
- val);
+ phy_write_mmd(phydev, DP83867_DEVADDR,
+ DP83867_IO_MUX_CFG, val);
}
}
--
2.19.1
More information about the U-Boot
mailing list