[U-Boot] [PATCH v2 11/22] configs: mx6sabreauto: Add SPL FIT and DM support

[Abel Vesa]

Enable all the necessary configs for SPL DM and FIT support for
mx6sabreauto.

Signed-off-by: Abel Vesa <abel.vesa at nxp.com>
---
 configs/mx6sabreauto_defconfig | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

diff --git a/configs/mx6sabreauto_defconfig b/configs/mx6sabreauto_defconfig
index 4bdcbb1..c64ec66 100644
--- a/configs/mx6sabreauto_defconfig
+++ b/configs/mx6sabreauto_defconfig
@@ -4,19 +4,28 @@ CONFIG_SYS_TEXT_BASE=0x17800000
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_TARGET_MX6SABREAUTO=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_SYS_MALLOC_F_LEN=0x400
 CONFIG_SPL=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_NXP_BOARD_REVISION=y
 CONFIG_NR_DRAM_BANKS=1
+CONFIG_TPL_SYS_MALLOC_F_LEN=0x400
+CONFIG_FIT=y
+CONFIG_SPL_FIT_PRINT=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_FIT_SOURCE="arch/arm/mach-imx/mx6/fit_spl.its"
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
 # CONFIG_CONSOLE_MUX is not set
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
 CONFIG_SUPPORT_RAW_INITRD=y
 CONFIG_BOUNCE_BUFFER=y
+CONFIG_SPL_SEPARATE_BSS=y
+CONFIG_SPL_FIT_IMAGE_TINY=y
 CONFIG_SPL_EXT_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_WATCHDOG_SUPPORT=y
@@ -40,8 +49,15 @@ CONFIG_CMD_EXT4=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="imx6q-sabreauto"
+CONFIG_OF_LIST="imx6dl-sabreauto imx6q-sabreauto imx6qp-sabreauto"
+CONFIG_MULTI_DTB_FIT=y
+CONFIG_SPL_MULTI_DTB_FIT=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_SPL_DM=y
 CONFIG_DFU_MMC=y
 CONFIG_DFU_SF=y
 CONFIG_DM_MMC=y
@@ -68,4 +84,3 @@ CONFIG_USB_HOST_ETHER=y
 CONFIG_USB_ETHER_ASIX=y
 CONFIG_VIDEO=y
 # CONFIG_VIDEO_SW_CURSOR is not set
-CONFIG_OF_LIBFDT=y
-- 
2.7.4