[U-Boot] [PATCH v2] spl: implement CRC check on U-Boot uImage

[Simon Goldschmidt]

Tom,

Am 11.12.2018 um 02:07 schrieb Simon Glass:
> On Wed, 28 Nov 2018 at 13:52, Simon Goldschmidt
> <simon.k.r.goldschmidt at gmail.com> wrote:
>>
>> SPL currently does not check uImage CRCs when loading U-Boot.
>>
>> This patch adds checking the uImage CRC when SPL loads U-Boot. It does
>> this by reusing the existing config option SPL_CRC32_SUPPORT to allow
>> leaving out the CRC check on boards where the additional code size or
>> boot time is a problem (adding the CRC check currently adds ~1.4 kByte
>> to flash).
>>
>> The SPL_CRC32_SUPPORT config option now gets enabled by default if SPL
>> support for legacy images is enabled to check the CRC on all boards
>> that don't actively take countermeasures.
>>
>> Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt at gmail.com>
>> ---
>>
>> Changes in v2:
>> - added Kconfig option SPL_LEGACY_IMAGE_CRC_CHECK to enable/disable
>>    checking CRC on legacy images
>>
>>   common/spl/Kconfig | 21 +++++++++++++++------
>>   common/spl/spl.c   | 30 +++++++++++++++++++++++++++++-
>>   include/spl.h      |  5 +++++
>>   3 files changed, 49 insertions(+), 7 deletions(-)
> 
> Reviewed-by: Simon Glass <sjg at chromium.org>

This is assigned to you in patchwork, any reason you did not add it for 
the 2019.01 release? Is there anything missing or was this just lost?

Thanks,
Simon