[U-Boot] [RFC PATCH 5/8] arm: actions: add S700 SoC device tree
André Przywara
andre.przywara at arm.com
Sun Jan 6 01:43:52 UTC 2019
On 05/01/2019 18:41, Manivannan Sadhasivam wrote:
> On Thu, Jan 03, 2019 at 06:56:20PM +0530, Amit Singh Tomar wrote:
>> This patch adds .dtsi file(sync with Linux 4.20) and required binding
>> for S700 SoC that is a 64-bit Quad-core ARM Cortex-A53 cores.
>>
>> Signed-off-by: Amit Singh Tomar <amittomer25 at gmail.com>
>> ---
>> arch/arm/dts/s700.dtsi | 193 +++++++++++++++++++++++++++
>> include/dt-bindings/clock/actions,s700-cmu.h | 118 ++++++++++++++++
>> 2 files changed, 311 insertions(+)
>> create mode 100644 arch/arm/dts/s700.dtsi
>> create mode 100644 include/dt-bindings/clock/actions,s700-cmu.h
>>
>> diff --git a/arch/arm/dts/s700.dtsi b/arch/arm/dts/s700.dtsi
>> new file mode 100644
>> index 0000000..a74c75a
>> --- /dev/null
>> +++ b/arch/arm/dts/s700.dtsi
>> @@ -0,0 +1,193 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * Copyright (c) 2017 Andreas Färber
>> + */
>> +
>> +#include <dt-bindings/clock/actions,s700-cmu.h>
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +
>> +/ {
>> + compatible = "actions,s700";
>> + interrupt-parent = <&gic>;
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> +
>> + cpus {
>> + #address-cells = <2>;
>> + #size-cells = <0>;
>> +
>> + cpu0: cpu at 0 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a53", "arm,armv8";
>> + reg = <0x0 0x0>;
>> + enable-method = "psci";
>> + };
>> +
>> + cpu1: cpu at 1 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a53", "arm,armv8";
>> + reg = <0x0 0x1>;
>> + enable-method = "psci";
>> + };
>> +
>> + cpu2: cpu at 2 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a53", "arm,armv8";
>> + reg = <0x0 0x2>;
>> + enable-method = "psci";
>> + };
>> +
>> + cpu3: cpu at 3 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a53", "arm,armv8";
>> + reg = <0x0 0x3>;
>> + enable-method = "psci";
>> + };
>> + };
>> +
>> + reserved-memory {
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + ranges;
>> +
>> + secmon at 1f000000 {
>> + reg = <0x0 0x1f000000 0x0 0x1000000>;
>> + no-map;
>> + };
>> + };
>> +
>> + psci {
>> + compatible = "arm,psci-0.2";
>> + method = "smc";
>> + };
>> +
>> + arm-pmu {
>> + compatible = "arm,cortex-a53-pmu";
>> + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
>> + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
>> + };
>> +
>> + timer {
>> + compatible = "arm,armv8-timer";
>> + interrupts = <GIC_PPI 13
>> + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 14
>> + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 11
>> + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> + <GIC_PPI 10
>> + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
>> + };
>> +
>> + hosc: hosc {
>> + compatible = "fixed-clock";
>> + clock-frequency = <24000000>;
>> + #clock-cells = <0>;
>> + };
>> +
>> + losc: losc {
>> + compatible = "fixed-clock";
>> + clock-frequency = <32768>;
>> + #clock-cells = <0>;
>> + };
>> +
>> + soc {
>> + u-boot,dm-pre-reloc;
>> + compatible = "simple-bus";
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + ranges;
>> +
>> + gic: interrupt-controller at e00f1000 {
>> + compatible = "arm,gic-400";
>> + reg = <0x0 0xe00f1000 0x0 0x1000>,
>> + <0x0 0xe00f2000 0x0 0x2000>,
>> + <0x0 0xe00f4000 0x0 0x2000>,
>> + <0x0 0xe00f6000 0x0 0x2000>;
>> + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
>> + interrupt-controller;
>> + #interrupt-cells = <3>;
>> + };
>> +
>> + uart0: serial at e0120000 {
>> + compatible = "actions,s900-uart", "actions,owl-uart";
>> + reg = <0x0 0xe0120000 0x0 0x2000>;
>> + clocks = <&cmu CLK_UART0>;
>> + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
>> + status = "disabled";
>> + };
>> +
>> + uart1: serial at e0122000 {
>> + compatible = "actions,s900-uart", "actions,owl-uart";
>> + reg = <0x0 0xe0122000 0x0 0x2000>;
>> + clocks = <&cmu CLK_UART1>;
>> + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
>> + status = "disabled";
>> + };
>> +
>> + uart2: serial at e0124000 {
>> + compatible = "actions,s900-uart", "actions,owl-uart";
>> + reg = <0x0 0xe0124000 0x0 0x2000>;
>> + clocks = <&cmu CLK_UART2>;
>> + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
>> + status = "disabled";
>> + };
>> +
>> + uart3: serial at e0126000 {
>> + u-boot,dm-pre-reloc;
>
> It would be best to keep this DTS unchanged with Linux and add the
> u-boot specific bits in -u-boot.dtsi.
Ah, good catch, I agree on the -u-boot.dtsi approach.
Amit, please don't claim it's "sync with Linux" if it isn't. At least
document this change.
Also there is another instance above, directly on the /soc node.
Maybe we should do as others do and set DM_FLAG_PRE_RELOC on the driver,
to avoid changing the DT at all?
Cheers,
Andre
>> + compatible = "actions,s900-uart", "actions,owl-uart";
>> + reg = <0x0 0xe0126000 0x0 0x2000>;
>> + clocks = <&cmu CLK_UART3>;
>> + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
>> + status = "disabled";
>> + };
>> +
>> + uart4: serial at e0128000 {
>> + compatible = "actions,s900-uart", "actions,owl-uart";
>> + reg = <0x0 0xe0128000 0x0 0x2000>;
>> + clocks = <&cmu CLK_UART4>;
>> + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
>> + status = "disabled";
>> + };
>> +
>> + uart5: serial at e012a000 {
>> + compatible = "actions,s900-uart", "actions,owl-uart";
>> + reg = <0x0 0xe012a000 0x0 0x2000>;
>> + clocks = <&cmu CLK_UART5>;
>> + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
>> + status = "disabled";
>> + };
>> +
>> + uart6: serial at e012c000 {
>> + compatible = "actions,s900-uart", "actions,owl-uart";
>> + reg = <0x0 0xe012c000 0x0 0x2000>;
>> + clocks = <&cmu CLK_UART6>;
>> + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
>> + status = "disabled";
>> + };
>> +
>> + cmu: clock-controller at e0168000 {
>> + u-boot,dm-pre-reloc;
>
> Same as above comment.
>
> Thanks,
> Mani
>
>> + compatible = "actions,s700-cmu";
>> + reg = <0x0 0xe0168000 0x0 0x1000>;
>> + clocks = <&hosc>, <&losc>;
>> + #clock-cells = <1>;
>> + };
>> +
>> + sps: power-controller at e01b0100 {
>> + compatible = "actions,s700-sps";
>> + reg = <0x0 0xe01b0100 0x0 0x100>;
>> + #power-domain-cells = <1>;
>> + };
>> +
>> + timer: timer at e024c000 {
>> + compatible = "actions,s700-timer";
>> + reg = <0x0 0xe024c000 0x0 0x4000>;
>> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
>> + interrupt-names = "timer1";
>> + };
>> + };
>> +};
>> diff --git a/include/dt-bindings/clock/actions,s700-cmu.h b/include/dt-bindings/clock/actions,s700-cmu.h
>> new file mode 100644
>> index 0000000..3e19429
>> --- /dev/null
>> +++ b/include/dt-bindings/clock/actions,s700-cmu.h
>> @@ -0,0 +1,118 @@
>> +/* SPDX-License-Identifier: GPL-2.0
>> + *
>> + * Device Tree binding constants for Actions Semi S700 Clock Management Unit
>> + *
>> + * Copyright (c) 2014 Actions Semi Inc.
>> + * Author: David Liu <liuwei at actions-semi.com>
>> + *
>> + * Author: Pathiban Nallathambi <pn at denx.de>
>> + * Author: Saravanan Sekar <sravanhome at gmail.com>
>> + */
>> +
>> +#ifndef __DT_BINDINGS_CLOCK_S700_H
>> +#define __DT_BINDINGS_CLOCK_S700_H
>> +
>> +#define CLK_NONE 0
>> +
>> +/* pll clocks */
>> +#define CLK_CORE_PLL 1
>> +#define CLK_DEV_PLL 2
>> +#define CLK_DDR_PLL 3
>> +#define CLK_NAND_PLL 4
>> +#define CLK_DISPLAY_PLL 5
>> +#define CLK_TVOUT_PLL 6
>> +#define CLK_CVBS_PLL 7
>> +#define CLK_AUDIO_PLL 8
>> +#define CLK_ETHERNET_PLL 9
>> +
>> +/* system clock */
>> +#define CLK_CPU 10
>> +#define CLK_DEV 11
>> +#define CLK_AHB 12
>> +#define CLK_APB 13
>> +#define CLK_DMAC 14
>> +#define CLK_NOC0_CLK_MUX 15
>> +#define CLK_NOC1_CLK_MUX 16
>> +#define CLK_HP_CLK_MUX 17
>> +#define CLK_HP_CLK_DIV 18
>> +#define CLK_NOC1_CLK_DIV 19
>> +#define CLK_NOC0 20
>> +#define CLK_NOC1 21
>> +#define CLK_SENOR_SRC 22
>> +
>> +/* peripheral device clock */
>> +#define CLK_GPIO 23
>> +#define CLK_TIMER 24
>> +#define CLK_DSI 25
>> +#define CLK_CSI 26
>> +#define CLK_SI 27
>> +#define CLK_DE 28
>> +#define CLK_HDE 29
>> +#define CLK_VDE 30
>> +#define CLK_VCE 31
>> +#define CLK_NAND 32
>> +#define CLK_SD0 33
>> +#define CLK_SD1 34
>> +#define CLK_SD2 35
>> +
>> +#define CLK_UART0 36
>> +#define CLK_UART1 37
>> +#define CLK_UART2 38
>> +#define CLK_UART3 39
>> +#define CLK_UART4 40
>> +#define CLK_UART5 41
>> +#define CLK_UART6 42
>> +
>> +#define CLK_PWM0 43
>> +#define CLK_PWM1 44
>> +#define CLK_PWM2 45
>> +#define CLK_PWM3 46
>> +#define CLK_PWM4 47
>> +#define CLK_PWM5 48
>> +#define CLK_GPU3D 49
>> +
>> +#define CLK_I2C0 50
>> +#define CLK_I2C1 51
>> +#define CLK_I2C2 52
>> +#define CLK_I2C3 53
>> +
>> +#define CLK_SPI0 54
>> +#define CLK_SPI1 55
>> +#define CLK_SPI2 56
>> +#define CLK_SPI3 57
>> +
>> +#define CLK_USB3_480MPLL0 58
>> +#define CLK_USB3_480MPHY0 59
>> +#define CLK_USB3_5GPHY 60
>> +#define CLK_USB3_CCE 61
>> +#define CLK_USB3_MAC 62
>> +
>> +#define CLK_LCD 63
>> +#define CLK_HDMI_AUDIO 64
>> +#define CLK_I2SRX 65
>> +#define CLK_I2STX 66
>> +
>> +#define CLK_SENSOR0 67
>> +#define CLK_SENSOR1 68
>> +
>> +#define CLK_HDMI_DEV 69
>> +
>> +#define CLK_ETHERNET 70
>> +#define CLK_RMII_REF 71
>> +
>> +#define CLK_USB2H0_PLLEN 72
>> +#define CLK_USB2H0_PHY 73
>> +#define CLK_USB2H0_CCE 74
>> +#define CLK_USB2H1_PLLEN 75
>> +#define CLK_USB2H1_PHY 76
>> +#define CLK_USB2H1_CCE 77
>> +
>> +#define CLK_TVOUT 78
>> +
>> +#define CLK_THERMAL_SENSOR 79
>> +
>> +#define CLK_IRC_SWITCH 80
>> +#define CLK_PCM1 81
>> +#define CLK_NR_CLKS (CLK_PCM1 + 1)
>> +
>> +#endif /* __DT_BINDINGS_CLOCK_S700_H */
>> --
>> 2.7.4
>>
More information about the U-Boot
mailing list