[U-Boot] [PATCH v2 3/3] mips: gpio: mscc: Obsoleted gpio-mscc-bitbang-spi.c
Lars Povlsen
lars.povlsen at microchip.com
Mon Jan 7 13:28:38 UTC 2019
With the new mscc_bb_spi.c driver, there is no longer use for the
gpio-mscc-bitbang-spi.c driver.
Signed-off-by: Lars Povlsen <lars.povlsen at microchip.com>
---
drivers/gpio/Kconfig | 7 --
drivers/gpio/Makefile | 1 -
drivers/gpio/gpio-mscc-bitbang-spi.c | 122 ---------------------------
3 files changed, 130 deletions(-)
delete mode 100644 drivers/gpio/gpio-mscc-bitbang-spi.c
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index aa55ff43c4..14a14be917 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -99,13 +99,6 @@ config LPC32XX_GPIO
help
Support for the LPC32XX GPIO driver.
-config MSCC_BITBANG_SPI_GPIO
- bool "Microsemi bitbang spi GPIO driver"
- depends on DM_GPIO && SOC_VCOREIII
- help
- Support controlling the GPIO used for SPI bitbang by software. Can
- be used by the VCoreIII SoCs, but it was mainly useful for Luton.
-
config MSCC_SGPIO
bool "Microsemi Serial GPIO driver"
depends on DM_GPIO && SOC_VCOREIII
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index be2b3c792f..7c479efe2d 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -59,5 +59,4 @@ obj-$(CONFIG_MSM_GPIO) += msm_gpio.o
obj-$(CONFIG_$(SPL_)PCF8575_GPIO) += pcf8575_gpio.o
obj-$(CONFIG_PM8916_GPIO) += pm8916_gpio.o
obj-$(CONFIG_MT7621_GPIO) += mt7621_gpio.o
-obj-$(CONFIG_MSCC_BITBANG_SPI_GPIO) += gpio-mscc-bitbang-spi.o
obj-$(CONFIG_MSCC_SGPIO) += mscc_sgpio.o
diff --git a/drivers/gpio/gpio-mscc-bitbang-spi.c b/drivers/gpio/gpio-mscc-bitbang-spi.c
deleted file mode 100644
index b675f9052c..0000000000
--- a/drivers/gpio/gpio-mscc-bitbang-spi.c
+++ /dev/null
@@ -1,122 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Microsemi SoCs pinctrl driver
- *
- * Author: <gregory.clement at bootlin.com>
- * License: Dual MIT/GPL
- * Copyright (c) 2018 Microsemi Corporation
- */
-
-#include <common.h>
-#include <asm-generic/gpio.h>
-#include <asm/io.h>
-#include <dm.h>
-#include <errno.h>
-
-enum {
- SDI,
- CS0,
- CS1,
- CS2,
- CS3,
- SDO,
- SCK
-};
-
-static const int pinmap[] = { 0, 5, 6, 7, 8, 10, 12 };
-
-#define SW_SPI_CSn_OE 0x1E /* bits 1 to 4 */
-#define SW_SPI_CS0_OE BIT(1)
-#define SW_SPI_SDO_OE BIT(9)
-#define SW_SPI_SCK_OE BIT(11)
-#define SW_PIN_CTRL_MODE BIT(13)
-
-struct mscc_bb_spi_gpio {
- void __iomem *regs;
- u32 cache_val;
-};
-
-static int mscc_bb_spi_gpio_set(struct udevice *dev, unsigned oft, int val)
-{
- struct mscc_bb_spi_gpio *gpio = dev_get_priv(dev);
-
- if (val)
- gpio->cache_val |= BIT(pinmap[oft]);
- else
- gpio->cache_val &= ~BIT(pinmap[oft]);
-
- writel(gpio->cache_val, gpio->regs);
-
- return 0;
-}
-
-static int mscc_bb_spi_gpio_direction_output(struct udevice *dev, unsigned oft,
- int val)
-{
- if (oft == 0) {
- pr_err("SW_SPI_DSI can't be used as output\n");
- return -ENOTSUPP;
- }
-
- mscc_bb_spi_gpio_set(dev, oft, val);
-
- return 0;
-}
-
-static int mscc_bb_spi_gpio_direction_input(struct udevice *dev, unsigned oft)
-{
- return 0;
-}
-
-static int mscc_bb_spi_gpio_get(struct udevice *dev, unsigned int oft)
-{
- struct mscc_bb_spi_gpio *gpio = dev_get_priv(dev);
- u32 val = readl(gpio->regs);
-
- return !!(val & BIT(pinmap[oft]));
-}
-
-static const struct dm_gpio_ops mscc_bb_spi_gpio_ops = {
- .direction_output = mscc_bb_spi_gpio_direction_output,
- .direction_input = mscc_bb_spi_gpio_direction_input,
- .set_value = mscc_bb_spi_gpio_set,
- .get_value = mscc_bb_spi_gpio_get,
-};
-
-static int mscc_bb_spi_gpio_probe(struct udevice *dev)
-{
- struct mscc_bb_spi_gpio *gpio = dev_get_priv(dev);
- struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
-
- gpio->regs = dev_remap_addr(dev);
- if (!gpio->regs)
- return -EINVAL;
-
- uc_priv->bank_name = dev->name;
- uc_priv->gpio_count = ARRAY_SIZE(pinmap);
- /*
- * Enable software mode to control the SPI pin, enables the
- * output mode for most of the pin and initialize the cache
- * value in the same time
- */
-
- gpio->cache_val = SW_PIN_CTRL_MODE | SW_SPI_SCK_OE | SW_SPI_SDO_OE |
- SW_SPI_CS0_OE;
- writel(gpio->cache_val, gpio->regs);
-
- return 0;
-}
-
-static const struct udevice_id mscc_bb_spi_gpio_ids[] = {
- {.compatible = "mscc,spi-bitbang-gpio"},
- {}
-};
-
-U_BOOT_DRIVER(gpio_mscc_bb_spi) = {
- .name = "gpio-mscc-spi-bitbang",
- .id = UCLASS_GPIO,
- .ops = &mscc_bb_spi_gpio_ops,
- .probe = mscc_bb_spi_gpio_probe,
- .of_match = of_match_ptr(mscc_bb_spi_gpio_ids),
- .priv_auto_alloc_size = sizeof(struct mscc_bb_spi_gpio),
-};
--
2.19.2
More information about the U-Boot
mailing list