[U-Boot] [PATCH v6 00/20] clk: Add Allwinner CLK, RESET support

[Jagan Teki]

On Fri, Jan 11, 2019 at 12:13 AM Jagan Teki <jagan at amarulasolutions.com> wrote:
>
> This series fixes few comments from previous verision for Allwinner
> clock gates, resets and dropped clock tree patches which I have
> mentioned on previous series[1].
>
> Changes for v6:
> - use ARRAY_SIZE for reset array instead of number
> - remove comment from sunxi_reset_request
> - Enable CONFIG_USB_OHCI_HCD on few missing boards
> - collect Marek Acked-by
>
> Any inputs,
> Jagan.
>
> [1] https://patchwork.ozlabs.org/cover/1019654/
>
> Jagan Teki (20):
>   clk: Add Allwinner A64 CLK driver
>   reset: Add Allwinner RESET driver
>   clk: sunxi: Add Allwinner H3/H5 CLK driver
>   clk: sunxi: Add Allwinner A10/A20 CLK driver
>   clk: sunxi: Add Allwinner A10s/A13 CLK driver
>   clk: sunxi: Add Allwinner A31 CLK driver
>   clk: sunxi: Add Allwinner A23/A33 CLK driver
>   clk: sunxi: Add Allwinner A83T CLK driver
>   clk: sunxi: Add Allwinner R40 CLK driver
>   clk: sunxi: Add Allwinner V3S CLK driver
>   clk: sunxi: Implement UART clocks
>   clk: sunxi: Implement UART resets
>   clk: sunxi: Add Allwinner H6 CLK driver
>   sunxi: A64: Update sun50i-a64-ccu.h
>   sunxi: Enable CLK
>   phy: sun4i-usb: Use CLK and RESET support
>   reset: Add reset valid
>   musb-new: sunxi: Use CLK and RESET support
>   sunxi: usb: Switch to Generic host controllers
>   usb: host: Drop [e-o]hci-sunxi drivers

Applied to u-boot-sunxi/master