[U-Boot] input in flex scanner failed (for rpi_0_w_defconfig)

[Belisko Marek]

Hi,

I'm trying to build u-boot in docker on osx (installed build-essentials +
gcc-arm) but hit this issue (with verbose make) during config phase. I
tried same on linux and it works fine. Any ideas what can cause this (or
how to debug)?

make ARCH=arm rpi_0_w_defconfig V=1

make -f ./scripts/Makefile.build obj=scripts/basic

  cc -Wp,-MD,scripts/basic/.fixdep.d -Wall -Wstrict-prototypes -O2
-fomit-frame-pointer      -o scripts/basic/fixdep scripts/basic/fixdep.c

rm -f .tmp_quiet_recordmcount

make -f ./scripts/Makefile.build obj=scripts/kconfig rpi_0_w_defconfig

  cc -Wp,-MD,scripts/kconfig/.conf.o.d -Wall -Wstrict-prototypes -O2
-fomit-frame-pointer    -DCURSES_LOC="<curses.h>" -DLOCALE   -c -o
scripts/kconfig/conf.o scripts/kconfig/conf.c

  cc -Wp,-MD,scripts/kconfig/.zconf.tab.o.d -Wall -Wstrict-prototypes -O2
-fomit-frame-pointer    -DCURSES_LOC="<curses.h>" -DLOCALE  -Iscripts/kconfig
-c -o scripts/kconfig/zconf.tab.o scripts/kconfig/zconf.tab.c

  cc  -o scripts/kconfig/conf scripts/kconfig/conf.o
scripts/kconfig/zconf.tab.o

scripts/kconfig/conf  --defconfig=arch/../configs/rpi_0_w_defconfig Kconfig

input in flex scanner failed

scripts/kconfig/Makefile:121: recipe for target 'rpi_0_w_defconfig' failed

make[1]: *** [rpi_0_w_defconfig] Error 2

Makefile:478: recipe for target 'rpi_0_w_defconfig' failed

make: *** [rpi_0_w_defconfig] Error 2

BR,

marek

-- 
as simple and primitive as possible
-------------------------------------------------
Marek Belisko - OPEN-NANDRA
Freelance Developer

Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
skype: marekwhite
twitter: #opennandra
web: http://open-nandra.com