[U-Boot] [PATCH 3/7] clk: stm32mp1: correct access to RCC_OCENSETR/RCC_OCENCLRR

Patrick Delaunay patrick.delaunay at st.com
Wed Jan 30 12:07:02 UTC 2019


Remove unnecessary setbits on set/clear registers.
Avoid to deactivate HSI with HSE.

Signed-off-by: Patrick Delaunay <patrick.delaunay at st.com>
---

 drivers/clk/clk_stm32mp1.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

diff --git a/drivers/clk/clk_stm32mp1.c b/drivers/clk/clk_stm32mp1.c
index e1477a1..5f2b2f1 100644
--- a/drivers/clk/clk_stm32mp1.c
+++ b/drivers/clk/clk_stm32mp1.c
@@ -1182,10 +1182,7 @@ static void stm32mp1_ls_osc_set(int enable, fdt_addr_t rcc, u32 offset,
 
 static void stm32mp1_hs_ocs_set(int enable, fdt_addr_t rcc, u32 mask_on)
 {
-	if (enable)
-		setbits_le32(rcc + RCC_OCENSETR, mask_on);
-	else
-		setbits_le32(rcc + RCC_OCENCLRR, mask_on);
+	writel(mask_on, rcc + (enable ? RCC_OCENSETR : RCC_OCENCLRR));
 }
 
 static int stm32mp1_osc_wait(int enable, fdt_addr_t rcc, u32 offset,
@@ -1256,20 +1253,20 @@ static void stm32mp1_lsi_set(fdt_addr_t rcc, int enable)
 static void stm32mp1_hse_enable(fdt_addr_t rcc, int bypass, int digbyp, int css)
 {
 	if (digbyp)
-		setbits_le32(rcc + RCC_OCENSETR, RCC_OCENR_DIGBYP);
+		writel(RCC_OCENR_DIGBYP, rcc + RCC_OCENSETR);
 	if (bypass || digbyp)
-		setbits_le32(rcc + RCC_OCENSETR, RCC_OCENR_HSEBYP);
+		writel(RCC_OCENR_HSEBYP, rcc + RCC_OCENSETR);
 
 	stm32mp1_hs_ocs_set(1, rcc, RCC_OCENR_HSEON);
 	stm32mp1_osc_wait(1, rcc, RCC_OCRDYR, RCC_OCRDYR_HSERDY);
 
 	if (css)
-		setbits_le32(rcc + RCC_OCENSETR, RCC_OCENR_HSECSSON);
+		writel(RCC_OCENR_HSECSSON, rcc + RCC_OCENSETR);
 }
 
 static void stm32mp1_csi_set(fdt_addr_t rcc, int enable)
 {
-	stm32mp1_ls_osc_set(enable, rcc, RCC_OCENSETR, RCC_OCENR_CSION);
+	stm32mp1_hs_ocs_set(enable, rcc, RCC_OCENR_CSION);
 	stm32mp1_osc_wait(enable, rcc, RCC_OCRDYR, RCC_OCRDYR_CSIRDY);
 }
 
-- 
2.7.4



More information about the U-Boot mailing list