[U-Boot] [PATCH] arm64: zynqmp: Fix tcminit help text alignment

[Michal Simek]

Trivial patch.

Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

 board/xilinx/zynqmp/cmds.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/board/xilinx/zynqmp/cmds.c b/board/xilinx/zynqmp/cmds.c
index 3e039ccb13ea..321670d4e3ea 100644
--- a/board/xilinx/zynqmp/cmds.c
+++ b/board/xilinx/zynqmp/cmds.c
@@ -174,11 +174,11 @@ static char zynqmp_help_text[] =
 	"zynqmp mmio_write address mask value - write value after masking to\n"
 	"					address\n"
 #ifdef CONFIG_DEFINE_TCM_OCM_MMAP
-	"zynqmp tcminit  mode - Initialize the TCM with zeros. TCM needs to be\n"
-	"		        initialized before accessing to avoid ECC\n"
-	"			errors. mode specifies in which mode TCM has\n"
-	"			to be initialized. Supported modes will be\n"
-	"			lock(0)/split(1)\n"
+	"zynqmp tcminit mode - Initialize the TCM with zeros. TCM needs to be\n"
+	"		       initialized before accessing to avoid ECC\n"
+	"		       errors. mode specifies in which mode TCM has\n"
+	"		       to be initialized. Supported modes will be\n"
+	"		       lock(0)/split(1)\n"
 #endif
 	;
 #endif
-- 
1.9.1