[U-Boot] [PATCH v3 0/9] mmc: sunxi: Enable DM_MMC

[Jagan Teki]

On Fri, Jan 25, 2019 at 2:05 PM Chen-Yu Tsai <wens at csie.org> wrote:
>
> On Fri, Jan 25, 2019 at 4:27 PM Jagan Teki <jagan at amarulasolutions.com> wrote:
> >
> > On Tue, Jan 22, 2019 at 7:55 AM Chen-Yu Tsai <wens at csie.org> wrote:
> > >
> > > On Mon, Jan 21, 2019 at 6:31 PM Jagan Teki <jagan at amarulasolutions.com> wrote:
> > > >
> > > > Compared to previous version changes[1] this version do manage
> > > > ahb clocks/resets via CLK framework.
> > > >
> > > > This version created changes along with Andre patches to support
> > > > clock/resets[2]
> > > >
> > > > Tested A64, SD, eMMC and respective changes available at
> > > > u-boot-sunxi/next
> > > >
> > > > Changes for v3:
> > > > - Handle clock via CLK framework.
> > > > Changes for v2:
> > > > - update the 'reset enablement' logic to do
> > > >   required SoC's
> > > >
> > > > [1] https://patchwork.ozlabs.org/cover/1026828/
> > > > [2] https://patchwork.ozlabs.org/cover/1027850/
> > > >
> > > > Andre Przywara (2):
> > > >   sunxi: clk: add MMC gates/resets
> > > >   sunxi: clk: A80: add MMC clock support
> > > >
> > > > Jagan Teki (7):
> > > >   mmc: sunxi: Add A83T emmc compatible
> > > >   mmc: sunxi: Add mmc, emmc H5/A64 compatible
> > > >   mmc: sunxi: Add DM_MMC support for H6
> > > >   mmc: sunxi: Add DM_MMC support for A80
> > > >   dm: mmc: sunxi: Add CLK and RESET support
> > > >   arm: sunxi: Enable DM_MMC
> > > >   arm: dts: sunxi: Enumerate MMC2 as MMC1
> > >
> > > Tested-by: Chen-Yu Tsai <wens at csie.org> # on the Bananapi M2M
> > >
> > > However, the A80 MMC clock patch is still missing code to toggle
> > > the upstream bus clock gate and reset control in the CCU.
> >
> > Sent it with original mmc clock and reset patch[1], let me know your comments.
>
> Right. The problem is nowhere in this series are those enabled /
> deasserted. The A80 CCU only has one gate & reset for the whole MMC
> subsystem, including the MMC config clocks block. Ideally the
> driver for that block should enable the gate and deassert the
> reset control.

Yes, that same has been included with v3.1 patch which I linked above.