[U-Boot] [PATCH 1/1] net: mvneta: Add GPIO configuration support

[Joe Hershberger]

On Tue, Dec 4, 2018 at 10:39 AM Aditya Prayoga <aditya at kobol.io> wrote:
>
> This patch add GPIO configuration support in mvneta driver.
> Driver will handle PHY reset. GPIO pins should be set in device tree.
>
> Ported from mvpp2x
> [https://patchwork.ozlabs.org/patch/799654/]
>
> Initial discussion to port the changes into mvneta
> [https://patchwork.ozlabs.org/patch/1005765/]
>
> Signed-off-by: Aditya Prayoga <aditya at kobol.io>

Acked-by: Joe Hershberger <joe.hershberger at ni.com>