[U-Boot] [PATCH 6/7] MSCC: add configuration for Jaguar2 SOC family.

[Daniel Schwierzeck]

Am 06.01.19 um 18:23 schrieb Horatiu Vultur:
> Add configuration that is used by Jaguar2 SOC family.
> 
> Signed-off-by: Horatiu Vultur <horatiu.vultur at microchip.com>
> ---
>  arch/mips/dts/Makefile     |  1 +
>  configs/mscc_jr2_defconfig | 59 ++++++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 60 insertions(+)
>  create mode 100644 configs/mscc_jr2_defconfig
> 

this patch should be squashed with patch 7/7. Otherwise one can
configure this board but not build it. This is bad for bisectability or
building each commit of a series with buildman.

> diff --git a/arch/mips/dts/Makefile b/arch/mips/dts/Makefile
> index b61afe6..1484db9 100644
> --- a/arch/mips/dts/Makefile
> +++ b/arch/mips/dts/Makefile
> @@ -19,6 +19,7 @@ dtb-$(CONFIG_BOARD_TPLINK_WDR4300) += tplink_wdr4300.dtb
>  dtb-$(CONFIG_TARGET_JZ4780_CI20) += ci20.dtb
>  dtb-$(CONFIG_SOC_LUTON) += luton_pcb090.dtb luton_pcb091.dtb
>  dtb-$(CONFIG_SOC_OCELOT) += ocelot_pcb120.dtb ocelot_pcb123.dtb
> +dtb-$(CONFIG_SOC_JR2) += jr2_pcb110.dtb jr2_pcb111.dtb serval2_pcb112.dtb
>  
>  targets += $(dtb-y)
>  
> diff --git a/configs/mscc_jr2_defconfig b/configs/mscc_jr2_defconfig
> new file mode 100644
> index 0000000..b215754
> --- /dev/null
> +++ b/configs/mscc_jr2_defconfig
> @@ -0,0 +1,59 @@
> +CONFIG_MIPS=y
> +CONFIG_SYS_TEXT_BASE=0x40000000
> +CONFIG_SYS_MALLOC_F_LEN=0x2000
> +CONFIG_ARCH_MSCC=y
> +CONFIG_SOC_JR2=y
> +CONFIG_SYS_LITTLE_ENDIAN=y
> +CONFIG_FIT=y
> +CONFIG_BOOTDELAY=3
> +CONFIG_USE_BOOTARGS=y
> +CONFIG_BOOTARGS="console=ttyS0,115200"
> +CONFIG_LOGLEVEL=7
> +CONFIG_DISPLAY_CPUINFO=y
> +CONFIG_SYS_PROMPT="jr2 # "
> +# CONFIG_CMD_BDI is not set
> +# CONFIG_CMD_CONSOLE is not set
> +# CONFIG_CMD_ELF is not set
> +# CONFIG_CMD_EXPORTENV is not set
> +# CONFIG_CMD_IMPORTENV is not set
> +# CONFIG_CMD_CRC32 is not set
> +CONFIG_CMD_MD5SUM=y
> +CONFIG_CMD_MEMINFO=y
> +CONFIG_CMD_MEMTEST=y
> +# CONFIG_CMD_FLASH is not set
> +CONFIG_CMD_GPIO=y
> +CONFIG_CMD_SF=y
> +CONFIG_CMD_SPI=y
> +# CONFIG_CMD_NET is not set
> +CONFIG_CMD_MTDPARTS=y
> +CONFIG_MTDIDS_DEFAULT="nor0=spi_flash"
> +CONFIG_MTDPARTS_DEFAULT="mtdparts=spi_flash:1m(UBoot),256k(Env),256k(Env.bk)"
> +# CONFIG_ISO_PARTITION is not set
> +CONFIG_DEFAULT_DEVICE_TREE="jr2_pcb110"
> +CONFIG_OF_LIST="jr2_pcb110 jr2_pcb111 serval2_pcb112"
> +CONFIG_DTB_RESELECT=y
> +CONFIG_MULTI_DTB_FIT=y
> +CONFIG_ENV_IS_IN_SPI_FLASH=y
> +CONFIG_NET_RANDOM_ETHADDR=y
> +CONFIG_CLK=y
> +CONFIG_DM_GPIO=y
> +CONFIG_MSCC_SGPIO=y
> +CONFIG_LED=y
> +CONFIG_LED_GPIO=y
> +CONFIG_DM_SPI_FLASH=y
> +CONFIG_SPI_FLASH=y
> +CONFIG_SPI_FLASH_BAR=y
> +CONFIG_SPI_FLASH_GIGADEVICE=y
> +CONFIG_SPI_FLASH_MACRONIX=y
> +CONFIG_SPI_FLASH_SPANSION=y
> +CONFIG_SPI_FLASH_WINBOND=y
> +CONFIG_SPI_FLASH_MTD=y
> +CONFIG_DM_ETH=y
> +CONFIG_PINCTRL=y
> +CONFIG_PINCONF=y
> +CONFIG_DM_SERIAL=y
> +CONFIG_SYS_NS16550=y
> +CONFIG_SPI=y
> +CONFIG_DM_SPI=y
> +CONFIG_LZMA=y
> +CONFIG_XZ=y
> 

-- 
- Daniel