[U-Boot] [PATCH 16/20] imx8m: fix sd to mmc1 and emmc to mmc2 for i.MX8MM

[Lukasz Majewski]

Hi Peng,

> > -----Original Message-----
> > From: Lukasz Majewski [mailto:lukma at denx.de]
> > Sent: 2019年1月30日 6:58
> > To: Peng Fan <peng.fan at nxp.com>
> > Cc: sbabic at denx.de; Fabio Estevam <fabio.estevam at nxp.com>;
> > dl-uboot-imx <uboot-imx at nxp.com>; u-boot at lists.denx.de
> > Subject: Re: [U-Boot] [PATCH 16/20] imx8m: fix sd to mmc1 and emmc
> > to mmc2 for i.MX8MM
> > 
> > Hi Peng,
> >   
> > > Since the SD is usdhc2 and eMMC is usdhc3,  
> > 
> > Is this true on all IMX8M boards? Or is it only on the development
> > kit you do have?  
> 
> This is a hack for board, needs to be fixed in next version.
> 
> > 
> > My point is that this shall be setup by DTS aliases or maybe by
> > Kconfig option.  
> 
> Could you share more information?

For example:

/ {
	model = "K+P iMX6Q";
	compatible = "kp,imx6-kp", "fsl,imx6";

	aliases {
		mmc0 = &usdhc2;
		mmc1 = &usdhc4;
		usb1 = &usbh1;
	};

	chosen {
		stdout-path = &uart1;
	};


And the "aliases" set the order in which you get the devices (like
mmc0, mmc1 above).

> 
> Thanks,
> Peng.
> 
> >   
> > > this cause mapping problem
> > > for spl_boot_device. So far hard coded them to correct MMC index,
> > > so that SD and eMMC boot can work.
> > >
> > > Signed-off-by: Peng Fan <peng.fan at nxp.com>
> > > ---
> > >  arch/arm/mach-imx/spl.c | 9 +++++++++
> > >  1 file changed, 9 insertions(+)
> > >
> > > diff --git a/arch/arm/mach-imx/spl.c b/arch/arm/mach-imx/spl.c
> > > index ebd8ff9290..0048832be8 100644
> > > --- a/arch/arm/mach-imx/spl.c
> > > +++ b/arch/arm/mach-imx/spl.c
> > > @@ -147,9 +147,18 @@ u32 spl_boot_device(void)
> > >  	case SD1_BOOT:
> > >  	case MMC1_BOOT:
> > >  		return BOOT_DEVICE_MMC1;
> > > +#if defined(CONFIG_IMX8MM)
> > > +	case SD2_BOOT:
> > > +	case MMC2_BOOT:
> > > +		return BOOT_DEVICE_MMC1;
> > > +	case SD3_BOOT:
> > > +	case MMC3_BOOT:
> > > +		return BOOT_DEVICE_MMC2;
> > > +#else
> > >  	case SD2_BOOT:
> > >  	case MMC2_BOOT:
> > >  		return BOOT_DEVICE_MMC2;
> > > +#endif
> > >  #endif
> > >  	case NAND_BOOT:
> > >  		return BOOT_DEVICE_NAND;  
> > 
> > 
> > 
> > 
> > Best regards,
> > 
> > Lukasz Majewski
> > 
> > --
> > 
> > DENX Software Engineering GmbH,      Managing Director: Wolfgang
> > Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell,
> > Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email:
> > lukma at denx.de  




Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190130/38cac672/attachment.sig>