[U-Boot] [U-Boot,v4,2/2] imx: Add PHYTEC phyBOARD-i.MX6UL-Segin
sbabic at denx.de
sbabic at denx.de
Wed Jan 30 09:05:14 UTC 2019
> Port for the PHYTEC phyBOARD-i.MX6UL-Segin single board computer. Based on
> the PHYTEC phyCORE-i.MX6UL SOM (PCL063).
> CPU: Freescale i.MX6UL rev1.2 528 MHz (running at 396 MHz)
> CPU: Industrial temperature grade (-40C to 105C) at 44C
> Reset cause: POR
> Board: PHYTEC phyCORE-i.MX6UL
> I2C: ready
> DRAM: 256 MiB
> NAND: 512 MiB
> MMC: FSL_SDHC: 0
> In: serial
> Out: serial
> Err: serial
> Net: FEC0
> Working:
> - Eth0
> - i2C
> - MMC/SD
> - NAND
> - UART (1 & 5)
> - USB (host & otg)
> Signed-off-by: Martyn Welch <martyn.welch at collabora.com>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
More information about the U-Boot
mailing list