[U-Boot] [PATCH v1 1/1] arm64: dt: poplar: add optee node

[Igor Opaniuk]

As Poplar supports running TF-A with OP-TEE as BL32
payload, add op-tee node in DT, which enables usage of
OP-TEE driver (which provides an interface for requesting services
from OP-TEE).

Signed-off-by: Igor Opaniuk <igor.opaniuk at linaro.org>
---
 arch/arm/dts/hi3798cv200-poplar.dts | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/dts/hi3798cv200-poplar.dts b/arch/arm/dts/hi3798cv200-poplar.dts
index 964326e..6bc2a23 100644
--- a/arch/arm/dts/hi3798cv200-poplar.dts
+++ b/arch/arm/dts/hi3798cv200-poplar.dts
@@ -28,6 +28,13 @@
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};
 
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
-- 
2.7.4