[U-Boot] [PATCH v2 09/17] spi: imx: Add support for 'per' clock enabling via driver model

[Lukasz Majewski]

With this commit one can enable ECSPI clock on imx6q without the need to
define direct call to it in the board file (as it is done up to now).

The information regarding proper clocks is provided via DTS description.

Signed-off-by: Lukasz Majewski <lukma at denx.de>
---

Changes in v2: None

 drivers/spi/mxc_spi.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/mxc_spi.c
index 6846762719..f34506099e 100644
--- a/drivers/spi/mxc_spi.c
+++ b/drivers/spi/mxc_spi.c
@@ -7,6 +7,7 @@
 #include <dm.h>
 #include <malloc.h>
 #include <spi.h>
+#include <clk.h>
 #include <linux/errno.h>
 #include <asm/io.h>
 #include <asm/gpio.h>
@@ -50,6 +51,9 @@ struct mxc_spi_slave {
 	unsigned int	max_hz;
 	unsigned int	mode;
 	struct gpio_desc ss;
+#if CONFIG_IS_ENABLED(CLK)
+	struct clk per_clk;
+#endif
 };
 
 static inline struct mxc_spi_slave *to_mxc_spi_slave(struct spi_slave *slave)
@@ -494,6 +498,19 @@ static int mxc_spi_probe(struct udevice *bus)
 	const void *blob = gd->fdt_blob;
 	int ret;
 
+#if CONFIG_IS_ENABLED(CLK)
+	ret = clk_get_by_name(bus, "per", &mxcs->per_clk);
+	if (ret) {
+		printf("%s: Failed to get per_clk\n", __func__);
+		return ret;
+	}
+
+	ret = clk_enable(&mxcs->per_clk);
+	if (ret) {
+		printf("%s: Failed to enable per_clk\n", __func__);
+		return ret;
+	}
+#endif
 	if (gpio_request_by_name(bus, "cs-gpios", 0, &plat->ss,
 				 GPIOD_IS_OUT)) {
 		dev_err(bus, "No cs-gpios property\n");
-- 
2.11.0