[U-Boot] [PATCH v2 21/22] board: mx6sabreauto: Update README with the SPL DM FIT info

[Abel Vesa]

There is a new step now. The need to build the u-boot.itb.
And instead of flashing the .img file, now the .itb file needs
to be flashed.

Signed-off-by: Abel Vesa <abel.vesa at nxp.com>
---
 board/freescale/mx6sabreauto/README | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/board/freescale/mx6sabreauto/README b/board/freescale/mx6sabreauto/README
index e8c589b..960a7d7 100644
--- a/board/freescale/mx6sabreauto/README
+++ b/board/freescale/mx6sabreauto/README
@@ -8,6 +8,7 @@ In order to build it:
 $ make mx6sabreauto_defconfig
 
 $ make
+$ make u-boot.itb
 
 This will generate the SPL and u-boot.img binaries.
 
@@ -17,7 +18,7 @@ $ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 && sync
 
 - Flash the u-boot.img binary into the SD card:
 
-$ sudo dd if=u-boot.img of=/dev/sdX bs=1K seek=69 && sync
+$ sudo dd if=u-boot.itb of=/dev/sdX bs=1K seek=69 && sync
 
 Booting via Falcon mode
 -----------------------
@@ -31,6 +32,7 @@ In order to build it:
 $ make mx6sabreauto_defconfig
 
 $ make
+$ make u-boot.itb
 
 This will generate the SPL image called SPL and the u-boot.img.
 
@@ -40,7 +42,7 @@ $ sudo dd if=SPL of=/dev/sdb bs=1K seek=1 && sync
 
 - Flash the u-boot.img image into the SD card:
 
-$ sudo dd if=u-boot.img of=/dev/sdb bs=1K seek=69 && sync
+$ sudo dd if=u-boot.itb of=/dev/sdb bs=1K seek=69 && sync
 
 Create a FAT16 boot partition to store uImage and the dtb file, then copy the files there:
 
-- 
2.7.4