[U-Boot] [RFC 07/17] dts: imx: Add imx6q-sabreauto dts and imx6qdl-sabreauto dtsi files

Abel Vesa abel.vesa at nxp.com
Wed Jan 16 14:03:31 UTC 2019


Add necessary dts and dtsi files in order to enable DM in both
SPL and u-boot proper for mx6sabreauto.

Signed-off-by: Abel Vesa <abel.vesa at nxp.com>
---
 arch/arm/dts/Makefile               |    3 +-
 arch/arm/dts/imx6q-sabreauto.dts    |   78 +++
 arch/arm/dts/imx6qdl-sabreauto.dtsi | 1118 +++++++++++++++++++++++++++++++++++
 3 files changed, 1198 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/dts/imx6q-sabreauto.dts
 create mode 100644 arch/arm/dts/imx6qdl-sabreauto.dtsi

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index dda4e59..dad5436 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -438,7 +438,8 @@ dtb-$(CONFIG_MX6QDL) += \
 	imx6q-icore.dtb \
 	imx6q-icore-mipi.dtb \
 	imx6q-icore-rqs.dtb \
-	imx6q-logicpd.dtb
+	imx6q-logicpd.dtb \
+	imx6q-sabreauto.dtb
 
 dtb-$(CONFIG_MX6SL) += imx6sl-evk.dtb
 
diff --git a/arch/arm/dts/imx6q-sabreauto.dts b/arch/arm/dts/imx6q-sabreauto.dts
new file mode 100644
index 0000000..60907de
--- /dev/null
+++ b/arch/arm/dts/imx6q-sabreauto.dts
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sabreauto.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Quad SABRE Automotive Board";
+	compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
+};
+
+/ {
+	soc {
+		u-boot,dm-spl;
+
+		aips-bus at 02000000 {
+			u-boot,dm-spl;
+		};
+
+		aips-bus at 02100000 {
+			u-boot,dm-spl;
+		};
+	};
+};
+
+&gpio1 {
+	u-boot,dm-spl;
+};
+
+&gpio6 {
+	u-boot,dm-spl;
+};
+
+&iomuxc {
+	u-boot,dm-spl;
+};
diff --git a/arch/arm/dts/imx6qdl-sabreauto.dtsi b/arch/arm/dts/imx6qdl-sabreauto.dtsi
new file mode 100644
index 0000000..678e15d
--- /dev/null
+++ b/arch/arm/dts/imx6qdl-sabreauto.dtsi
@@ -0,0 +1,1118 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2012-2015 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		mxcfb0 = &mxcfb1;
+		mxcfb1 = &mxcfb2;
+		mxcfb2 = &mxcfb3;
+		mxcfb3 = &mxcfb4;
+		mmc0 = &usdhc3;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys1";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		home {
+			label = "Home";
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+			gpio-key,wakeup;
+			linux,code = <KEY_HOME>;
+		};
+
+		back {
+			label = "Back";
+			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+			gpio-key,wakeup;
+			linux,code = <KEY_BACK>;
+		};
+
+		program {
+			label = "Program";
+			gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+			gpio-key,wakeup;
+			linux,code = <KEY_PROGRAM>;
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+			gpio-key,wakeup;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio5 14 GPIO_ACTIVE_LOW>;
+			gpio-key,wakeup;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+
+	memory:	memory {
+		reg = <0x10000000 0x80000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		user {
+			label = "debug";
+			gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb_h1_vbus: regulator at 0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&max7310_b 7 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb_otg_vbus: regulator at 1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&max7310_c 1 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_audio: regulator at 2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "cs42888_supply";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_3p3v: 3p3v {
+			compatible = "regulator-fixed";
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_si4763_vio1: regulator at 3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "vio1";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_si4763_vio2: regulator at 4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "vio2";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_si4763_vd: regulator at 5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			regulator-name = "vd";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_si4763_va: regulator at 6 {
+			compatible = "regulator-fixed";
+			reg = <6>;
+			regulator-name = "va";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		reg_sd3_vmmc: regulator at 7 {
+			compatible = "regulator-fixed";
+			regulator-name = "P3V3_SDa_SWITCHED";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			/* remove below line to enable this regulator */
+			status = "okay";
+		};
+
+		reg_can_en: regulator at 8 {
+			compatible = "regulator-fixed";
+			reg = <8>;
+			regulator-name = "can-en";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&max7310_b 6 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_can_stby: regulator at 9 {
+			compatible = "regulator-fixed";
+			reg = <9>;
+			regulator-name = "can-stby";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&max7310_b 5 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&reg_can_en>;
+		};
+	};
+
+	hannstar_cabc {
+		compatible = "hannstar,cabc";
+
+		lvds_share {
+			gpios = <&max7310_a 0 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	mxcfb1: fb at 0 {
+		compatible = "fsl,mxc_sdc_fb";
+		disp_dev = "ldb";
+		interface_pix_fmt = "RGB666";
+		default_bpp = <16>;
+		int_clk = <0>;
+		late_init = <0>;
+		status = "disabled";
+	};
+
+	mxcfb2: fb at 1 {
+		compatible = "fsl,mxc_sdc_fb";
+		disp_dev = "hdmi";
+		interface_pix_fmt = "RGB24";
+		mode_str ="1920x1080M at 60";
+		default_bpp = <24>;
+		int_clk = <0>;
+		late_init = <0>;
+		status = "disabled";
+	};
+
+	mxcfb3: fb at 2 {
+		compatible = "fsl,mxc_sdc_fb";
+		disp_dev = "lcd";
+		interface_pix_fmt = "RGB565";
+		mode_str ="CLAA-WVGA";
+		default_bpp = <16>;
+		int_clk = <0>;
+		late_init = <0>;
+		status = "disabled";
+	};
+
+	mxcfb4: fb at 3 {
+		compatible = "fsl,mxc_sdc_fb";
+		disp_dev = "ldb";
+		interface_pix_fmt = "RGB666";
+		default_bpp = <16>;
+		int_clk = <0>;
+		late_init = <0>;
+		status = "disabled";
+	};
+
+	clocks {
+		codec_osc: anaclk2 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24576000>;
+		};
+	};
+
+	sound-cs42888 {
+		compatible = "fsl,imx6-sabreauto-cs42888",
+				"fsl,imx-audio-cs42888";
+		model = "imx-cs42888";
+		esai-controller = <&esai>;
+		asrc-controller = <&asrc>;
+		audio-codec = <&codec>;
+	};
+
+	sound-fm {
+		compatible = "fsl,imx-audio-si476x",
+			   "fsl,imx-tuner-si476x";
+		model = "imx-radio-si4763";
+		ssi-controller = <&ssi2>;
+		fm-controller = <&si476x_codec>;
+		mux-int-port = <2>;
+		mux-ext-port = <5>;
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif",
+			   "fsl,imx-sabreauto-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif>;
+		spdif-in;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		status = "okay";
+	};
+
+	v4l2_cap_0 {
+		compatible = "fsl,imx6q-v4l2-capture";
+		ipu_id = <0>;
+		csi_id = <0>;
+		mclk_source = <0>;
+		status = "okay";
+	};
+
+	v4l2_out {
+		compatible = "fsl,mxc_v4l2_output";
+		status = "okay";
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_PLL4_BYPASS_SRC>,
+			  <&clks IMX6QDL_PLL4_BYPASS>,
+			  <&clks IMX6QDL_CLK_PLL4_POST_DIV>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_LVDS2_IN>,
+				<&clks IMX6QDL_PLL4_BYPASS_SRC>;
+	assigned-clock-rates = <0>, <0>, <24576000>;
+	fsl,ldb-di0-parent = <&clks IMX6QDL_CLK_PLL2_PFD0_352M>;
+	fsl,ldb-di1-parent = <&clks IMX6QDL_CLK_PLL2_PFD0_352M>;
+};
+
+&dcic1 {
+	dcic_id = <0>;
+	dcic_mux = "dcic-hdmi";
+	status = "okay";
+};
+
+&dcic2 {
+	dcic_id = <1>;
+	dcic_mux = "dcic-lvds0";
+	status = "okay";
+};
+
+&ecspi1 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio3 19 0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
+	status = "disabled"; /* pin conflict with WEIM NOR */
+
+	flash: m25p80 at 0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p32";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&esai {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esai>;
+	assigned-clocks = <&clks IMX6QDL_CLK_ESAI_SEL>,
+			  <&clks IMX6QDL_CLK_ESAI_EXTAL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <0>, <24576000>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	fsl,magic-packet;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	pinctrl-assert-gpios = <&max7310_b 3 GPIO_ACTIVE_HIGH>; /* TX */
+	xceiver-supply = <&reg_can_stby>;
+	status = "disabled"; /* pin conflict with fec */
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can_stby>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "disabled"; /* pin conflict with uart3 */
+	nand-on-flash-bbt;
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	egalax_ts at 04 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_egalax_int>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <28 2>;
+		wakeup-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
+	};
+
+	pmic: pfuze100 at 08 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	codec: cs42888 at 48 {
+		compatible = "cirrus,cs42888";
+		reg = <0x48>;
+		clocks = <&codec_osc>;
+		clock-names = "mclk";
+		VA-supply = <&reg_audio>;
+		VD-supply = <&reg_audio>;
+		VLS-supply = <&reg_audio>;
+		VLC-supply = <&reg_audio>;
+	};
+
+	si4763: si4763 at 63 {
+		compatible = "si4761";
+		reg = <0x63>;
+		va-supply = <&reg_si4763_va>;
+		vd-supply = <&reg_si4763_vd>;
+		vio1-supply = <&reg_si4763_vio1>;
+		vio2-supply = <&reg_si4763_vio2>;
+		revision-a10; /* set to default A10 compatible command set */
+
+		si476x_codec: si476x-codec {
+			compatible = "si476x-codec";
+		};
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	adv7180: adv7180 at 21 {
+		compatible = "adv,adv7180";
+		reg = <0x21>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1_1>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		clock-names = "csi_mclk";
+		DOVDD-supply = <&reg_3p3v>; /* 3.3v, enabled via 2.8 VGEN6 */
+		AVDD-supply = <&reg_3p3v>;  /* 1.8v */
+		DVDD-supply = <&reg_3p3v>;  /* 1.8v */
+		PVDD-supply = <&reg_3p3v>;  /* 1.8v */
+		pwn-gpios = <&max7310_b 2 0>;
+		csi_id = <0>;
+		mclk = <24000000>;
+		mclk_source = <0>;
+		cvbs = <1>;
+	};
+
+	isl29023 at 44 {
+		compatible = "fsl,isl29023";
+		reg = <0x44>;
+		rext = <499>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <17 2>;
+	};
+
+	max7310_a: gpio at 30 {
+		compatible = "maxim,max7310";
+		reg = <0x30>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	max7310_b: gpio at 32 {
+		compatible = "maxim,max7310";
+		reg = <0x32>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	max7310_c: gpio at 34 {
+		compatible = "maxim,max7310";
+		reg = <0x34>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	mag3110 at 0e {
+		compatible = "fsl,mag3110";
+		reg = <0x0e>;
+		position = <2>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <29 1>;
+	};
+
+	mma8451 at 1c {
+		compatible = "fsl,mma8451";
+		reg = <0x1c>;
+		position = <7>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <31 8>;
+		interrupt-route = <1>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6qdl-sabreauto {
+		pinctrl_audmux: audmux {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT16__AUD5_TXC  0x130b0
+				MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS 0x130b0
+				MX6QDL_PAD_DISP0_DAT19__AUD5_RXD  0x130b0
+			>;
+		};
+
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1f059
+				MX6QDL_PAD_SD2_DAT2__GPIO1_IO13  0x80000000
+				MX6QDL_PAD_GPIO_18__SD3_VSELECT 0x17059
+				MX6QDL_PAD_EIM_A24__GPIO5_IO04   0x80000000
+				MX6QDL_PAD_SD2_DAT0__GPIO1_IO15  0x80000000
+				MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x80000000
+				MX6QDL_PAD_EIM_EB1__GPIO2_IO29	0x80000000
+				MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x80000000
+				MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x80000000
+				MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x17059
+				MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x17059
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			>;
+		};
+
+		pinctrl_ecspi1_cs: ecspi1cs {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000
+			>;
+		};
+
+		pinctrl_egalax_int: egalax_intgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x80000000
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL1__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_KEY_COL2__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			>;
+		};
+
+		pinctrl_enet_irq: enetirqgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+			>;
+		};
+
+		pinctrl_esai: esaigrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK 0x1b030
+				MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS    0x1b030
+				MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2 0x1b030
+				MX6QDL_PAD_GPIO_5__ESAI_TX2_RX3     0x1b030
+				MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1  0x1b030
+				MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0   0x1b030
+				MX6QDL_PAD_GPIO_17__ESAI_TX0        0x1b030
+				MX6QDL_PAD_NANDF_CS3__ESAI_TX1      0x1b030
+				MX6QDL_PAD_ENET_MDIO__ESAI_RX_CLK   0x1b030
+				MX6QDL_PAD_GPIO_9__ESAI_RX_FS       0x1b030
+			>;
+		};
+
+		pinctrl_flexcan1: flexcan1grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX        0x17059
+				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x17059
+			>;
+		};
+
+		pinctrl_flexcan2: flexcan2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x17059
+				MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x17059
+			>;
+		};
+
+		pinctrl_gpio_keys: gpio_keysgrp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__GPIO1_IO11	0x1b0b0
+				MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x1b0b0
+				MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0
+				MX6QDL_PAD_SD4_DAT7__GPIO2_IO15	0x1b0b0
+				MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x1b0b0
+			>;
+		};
+
+		pinctrl_gpio_leds: gpioledsgrp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x80000000
+			>;
+		};
+
+		pinctrl_gpmi_nand: gpminandgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
+				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+				MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_EB2__I2C2_SCL	0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2_gpio: i2c2grp_gpio {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_EB2__GPIO2_IO30    0x1b8b1
+				MX6QDL_PAD_KEY_ROW3__GPIO4_IO13   0x1b8b1
+			>;
+		};
+
+		pinctrl_ipu1_1: ipu1grp-1 { /* parallel port 16-bit */
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04   0x80000000
+				MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05   0x80000000
+				MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06   0x80000000
+				MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07   0x80000000
+				MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08   0x80000000
+				MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09   0x80000000
+				MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10  0x80000000
+				MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11  0x80000000
+				MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12  0x80000000
+				MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13  0x80000000
+				MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14  0x80000000
+				MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15  0x80000000
+				MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16  0x80000000
+				MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17  0x80000000
+				MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18  0x80000000
+				MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19  0x80000000
+				MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x80000000
+				MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC    0x80000000
+				MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC   0x80000000
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_3__I2C3_SCL  0x4001b8b1
+				MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3_gpio: i2c3grp_gpio {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_3__GPIO1_IO03  0x1b8b1
+				MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x1b8b1
+			>;
+		};
+
+		pinctrl_pwm3: pwm1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_spdif: spdifgrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__SPDIF_IN 0x1b0b0
+			>;
+		};
+
+		pinctrl_uart3_1: uart3grp-1 {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CLK__UART3_RX_DATA	0x1b0b1
+				MX6QDL_PAD_SD4_CMD__UART3_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D30__UART3_CTS_B		0x1b0b1
+				MX6QDL_PAD_EIM_EB3__UART3_RTS_B		0x1b0b1
+			>;
+		};
+
+		pinctrl_uart3dte_1: uart3dtegrp-1 {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CLK__UART3_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD4_CMD__UART3_RX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D30__UART3_RTS_B		0x1b0b1
+				MX6QDL_PAD_EIM_EB3__UART3_CTS_B		0x1b0b1
+			>;
+		};
+
+		pinctrl_uart4: uart4grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+			>;
+		};
+
+		pinctrl_usdhc1: usdhc1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__SD1_CMD             0x17071
+				MX6QDL_PAD_SD1_CLK__SD1_CLK             0x10071
+				MX6QDL_PAD_SD1_DAT0__SD1_DATA0          0x17071
+				MX6QDL_PAD_SD1_DAT1__SD1_DATA1          0x17071
+				MX6QDL_PAD_SD1_DAT2__SD1_DATA2          0x17071
+				MX6QDL_PAD_SD1_DAT3__SD1_DATA3          0x17071
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170b9
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170b9
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170b9
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170b9
+			>;
+		};
+
+		pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+			u-boot,dm-spl;
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170f9
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170f9
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170f9
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170f9
+			>;
+		};
+
+		pinctrl_weim_cs0: weimcs0grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_CS0__EIM_CS0_B		0xb0b1
+			>;
+		};
+
+		pinctrl_weim_nor: weimnorgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_OE__EIM_OE_B		0xb0b1
+				MX6QDL_PAD_EIM_RW__EIM_RW		0xb0b1
+				MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B		0xb060
+				MX6QDL_PAD_EIM_D16__EIM_DATA16		0x1b0b0
+				MX6QDL_PAD_EIM_D17__EIM_DATA17		0x1b0b0
+				MX6QDL_PAD_EIM_D18__EIM_DATA18		0x1b0b0
+				MX6QDL_PAD_EIM_D19__EIM_DATA19		0x1b0b0
+				MX6QDL_PAD_EIM_D20__EIM_DATA20		0x1b0b0
+				MX6QDL_PAD_EIM_D21__EIM_DATA21		0x1b0b0
+				MX6QDL_PAD_EIM_D22__EIM_DATA22		0x1b0b0
+				MX6QDL_PAD_EIM_D23__EIM_DATA23		0x1b0b0
+				MX6QDL_PAD_EIM_D24__EIM_DATA24		0x1b0b0
+				MX6QDL_PAD_EIM_D25__EIM_DATA25		0x1b0b0
+				MX6QDL_PAD_EIM_D26__EIM_DATA26		0x1b0b0
+				MX6QDL_PAD_EIM_D27__EIM_DATA27		0x1b0b0
+				MX6QDL_PAD_EIM_D28__EIM_DATA28		0x1b0b0
+				MX6QDL_PAD_EIM_D29__EIM_DATA29		0x1b0b0
+				MX6QDL_PAD_EIM_D30__EIM_DATA30		0x1b0b0
+				MX6QDL_PAD_EIM_D31__EIM_DATA31		0x1b0b0
+				MX6QDL_PAD_EIM_A23__EIM_ADDR23		0xb0b1
+				MX6QDL_PAD_EIM_A22__EIM_ADDR22		0xb0b1
+				MX6QDL_PAD_EIM_A21__EIM_ADDR21		0xb0b1
+				MX6QDL_PAD_EIM_A20__EIM_ADDR20		0xb0b1
+				MX6QDL_PAD_EIM_A19__EIM_ADDR19		0xb0b1
+				MX6QDL_PAD_EIM_A18__EIM_ADDR18		0xb0b1
+				MX6QDL_PAD_EIM_A17__EIM_ADDR17		0xb0b1
+				MX6QDL_PAD_EIM_A16__EIM_ADDR16		0xb0b1
+				MX6QDL_PAD_EIM_DA15__EIM_AD15		0xb0b1
+				MX6QDL_PAD_EIM_DA14__EIM_AD14		0xb0b1
+				MX6QDL_PAD_EIM_DA13__EIM_AD13		0xb0b1
+				MX6QDL_PAD_EIM_DA12__EIM_AD12		0xb0b1
+				MX6QDL_PAD_EIM_DA11__EIM_AD11		0xb0b1
+				MX6QDL_PAD_EIM_DA10__EIM_AD10		0xb0b1
+				MX6QDL_PAD_EIM_DA9__EIM_AD09		0xb0b1
+				MX6QDL_PAD_EIM_DA8__EIM_AD08		0xb0b1
+				MX6QDL_PAD_EIM_DA7__EIM_AD07		0xb0b1
+				MX6QDL_PAD_EIM_DA6__EIM_AD06		0xb0b1
+				MX6QDL_PAD_EIM_DA5__EIM_AD05		0xb0b1
+				MX6QDL_PAD_EIM_DA4__EIM_AD04		0xb0b1
+				MX6QDL_PAD_EIM_DA3__EIM_AD03		0xb0b1
+				MX6QDL_PAD_EIM_DA2__EIM_AD02		0xb0b1
+				MX6QDL_PAD_EIM_DA1__EIM_AD01		0xb0b1
+				MX6QDL_PAD_EIM_DA0__EIM_AD00		0xb0b1
+			>;
+		};
+
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel at 0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		primary;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
+	};
+
+	lvds-channel at 1 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing1>;
+			timing1: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
+	};
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	assigned-clocks = <&clks IMX6QDL_CLK_SPDIF_SEL>,
+			  <&clks IMX6QDL_CLK_SPDIF_PODF>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_PFD3_454M>;
+	assigned-clock-rates = <0>, <227368421>;
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&ssi2 {
+	assigned-clocks = <&clks IMX6QDL_CLK_SSI2_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <0>;
+	fsl,mode = "i2s-master";
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3_1>;
+	pinctrl-assert-gpios = <&max7310_b 4 GPIO_ACTIVE_HIGH>, /* CTS */
+			       <&max7310_c 3 GPIO_ACTIVE_HIGH>; /* RXD and TXD */
+	fsl,uart-has-rtscts;
+	status = "okay";
+	/* for DTE mode, add below change */
+	/* fsl,dte-mode; */
+	/* pinctrl-0 = <&pinctrl_uart3dte_1>; */
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	enable-sdio-wakeup;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+	/*
+	 * Due to board issue, we can not use external regulator for card slot
+	 * by default since the card power is shared with card detect pullup.
+	 * Disabling the vmmc regulator will cause unexpected card detect
+	 * interrupts.
+	 * HW rework is needed to fix this issue. Remove R695 first, then you
+	 * can open below line to enable the using of external regulator.
+	 * Then you will be able to power off the card during suspend. This is
+	 * especially needed for a SD3.0 card re-enumeration working on UHS mode
+	 * Note: reg_sd3_vmmc is also need to be enabled
+	 */
+	/* vmmc-supply = <&reg_sd3_vmmc>; */
+	keep-power-in-suspend;
+	enable-sdio-wakeup;
+	u-boot,dm-spl;
+	status = "okay";
+};
+
+&weim {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_weim_nor &pinctrl_weim_cs0>;
+	#address-cells = <2>;
+	#size-cells = <1>;
+	ranges = <0 0 0x08000000 0x08000000>;
+	status = "disabled"; /* pin conflict with SPI NOR */
+
+	nor at 0,0 {
+		compatible = "cfi-flash";
+		reg = <0 0 0x02000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		bank-width = <2>;
+		fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000
+				0x0000c000 0x1404a38e 0x00000000>;
+	};
+};
-- 
2.7.4



More information about the U-Boot mailing list