[U-Boot] [PATCH v2] arm64: mvebu: Add basic support for uDPU board

[Stefan Roese]

On 15.01.19 12:50, Vladimir Vid wrote:
> This adds initial support for micro-DPU (uDPU) board which is based on Armada-3720 SoC.
> micro-DPU is the single-port FTTdp "distribution point unit" made by Methode Electronics
> which offers complete modularity with replaceable SFP modules both for uplink and downlink
> (G.hn over twisted-pair, G.hn over coax, 1G and 2.5G Ethernet over Cat-5e cable).
> 
> On-board features:
> - 512 MiB DDR3
> - 2 x 2.5G SFP via HSGMII SERDES interface to the A3720 SoC
> - USB 2.0 Type-C connector
> - 4GB eMMC
> - ETSI TS 101548 reverse powering via twisted pair (RJ45) or coax (F Type)
> 
> Cc: Luka Perkov <luka.perkov at sartura.hr>
> Cc: Luis Torres <luis.torres at methode.com>
> Cc: Scott Roberts <scott.roberts at telus.com>
> Cc: Paul Arola <paul.arola at telus.com>
> Signed-off-by: Vladimir Vid <vladimir.vid at sartura.hr>
> 
> Cc: Chris Packham <judge.packham at gmail.com>
> Cc: Stefan Roese <sr at denx.de>
> ---
> 
> v2:
> - updated compatible string
> - added 'u-boot,dm-pre-reloc' to spi0 and spi-flash nodes
> - updated board defconfig (properly with savedefconfig this time)
> - removed unused PCA driver from defconfig

This patch generates the following error:

drivers/mmc/mv_sdhci.c: In function ‘mv_sdh_init’:
drivers/mmc/mv_sdhci.c:91:9: warning: implicit declaration of function ‘add_sdhci’ [-Wimplicit-function-declaration]
   return add_sdhci(host, 0, min_clk);
          ^~~~~~~~~

Please fix and resubmit.

Thanks,
Stefan