[U-Boot] [PATCH 6/7] dts: stm32mp1: clock tree update

[Patrick Delaunay]

- Add st,digbypass on clk_hse node (needed for board rev.C)
- MLAHB/AHB max frequency increased from 200 to 209MHz, with:
  - PLL3P set to 208.8MHz for MCU sub-system
  - PLL3Q set to 24.57MHz for 48kHz SAI/SPI2S
  - PLL3R set to 11.29MHz for 44.1kHz SAI/SPI2S
  - PLL4P set to 99MHz for SDMMC and SPDIFRX
  - PLL4Q set to 74.25MHz for EVAL board

Signed-off-by: Patrick Delaunay <patrick.delaunay at st.com>
---

 arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi  | 27 +++++++++++++++------------
 include/dt-bindings/clock/stm32mp1-clks.h |  3 ---
 2 files changed, 15 insertions(+), 15 deletions(-)

diff --git a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi
index 4898483..70bbf66 100644
--- a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi
@@ -39,6 +39,10 @@
 	};
 };
 
+&clk_hse {
+	st,digbypass;
+};
+
 &uart4_pins_a {
 	u-boot,dm-pre-reloc;
 	pins1 {
@@ -68,7 +72,6 @@
 	u-boot,dm-pre-reloc;
 };
 
-/* CLOCK init */
 &rcc {
 	st,clksrc = <
 		CLK_MPU_PLL1P
@@ -101,7 +104,7 @@
 		CLK_FMC_ACLK
 		CLK_QSPI_ACLK
 		CLK_ETH_DISABLED
-		CLK_SDMMC12_PLL3R
+		CLK_SDMMC12_PLL4P
 		CLK_DSI_DSIPLL
 		CLK_STGEN_HSE
 		CLK_USBPHY_HSE
@@ -110,7 +113,7 @@
 		CLK_SPI45_HSI
 		CLK_SPI6_HSI
 		CLK_I2C46_HSI
-		CLK_SDMMC3_PLL3R
+		CLK_SDMMC3_PLL4P
 		CLK_USBO_USBPHY
 		CLK_ADC_CKPER
 		CLK_CEC_LSE
@@ -121,17 +124,17 @@
 		CLK_UART35_HSI
 		CLK_UART6_HSI
 		CLK_UART78_HSI
-		CLK_SPDIF_PLL3Q
+		CLK_SPDIF_PLL4P
 		CLK_FDCAN_PLL4Q
 		CLK_SAI1_PLL3Q
 		CLK_SAI2_PLL3Q
 		CLK_SAI3_PLL3Q
 		CLK_SAI4_PLL3Q
-		CLK_RNG1_CSI
-		CLK_RNG2_CSI
+		CLK_RNG1_LSI
+		CLK_RNG2_LSI
 		CLK_LPTIM1_PCLK1
 		CLK_LPTIM23_PCLK3
-		CLK_LPTIM45_PCLK3
+		CLK_LPTIM45_LSE
 	>;
 
 	/* VCO = 1300.0 MHz => P = 650 (CPU) */
@@ -148,16 +151,16 @@
 		u-boot,dm-pre-reloc;
 	};
 
-	/* VCO = 786.4 MHz => P = 197, Q = 49, R = 98 */
+	/* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */
 	pll3: st,pll at 2 {
-		cfg = < 2 97 3 15 7 PQR(1,1,1) >;
-		frac = < 0x9ba >;
+		cfg = < 1 33 1 16 36 PQR(1,1,1) >;
+		frac = < 0x1a04 >;
 		u-boot,dm-pre-reloc;
 	};
 
-	/* VCO = 508.0 MHz => P = 56, Q = 56, R = 56 */
+	/* VCO = 594.0 MHz => P = 99, Q = 74, R = 74 */
 	pll4: st,pll at 3 {
-		cfg = < 5 126 8 8 8 PQR(1,1,1) >;
+		cfg = < 3 98 5 7 7 PQR(1,1,1) >;
 		u-boot,dm-pre-reloc;
 	};
 };
diff --git a/include/dt-bindings/clock/stm32mp1-clks.h b/include/dt-bindings/clock/stm32mp1-clks.h
index 90ec780..4cdaf13 100644
--- a/include/dt-bindings/clock/stm32mp1-clks.h
+++ b/include/dt-bindings/clock/stm32mp1-clks.h
@@ -248,7 +248,4 @@
 
 #define STM32MP1_LAST_CLK 232
 
-#define LTDC_K		LTDC_PX
-#define ETHMAC_K	ETHCK_K
-
 #endif /* _DT_BINDINGS_STM32MP1_CLKS_H_ */
-- 
2.7.4