[U-Boot] [PATCH v1 01/14] tpc70: config: Add script commands to update u-boot and OE's wic
Marek Vasut
marex at denx.de
Wed Jan 2 01:07:18 UTC 2019
On 1/2/19 12:37 AM, Lukasz Majewski wrote:
> Signed-off-by: Lukasz Majewski <lukma at denx.de>
The tags should be ARM: imx: ...
The commit message is missing.
> ---
>
> include/configs/kp_imx6q_tpc.h | 21 +++++++++++++++++++++
> 1 file changed, 21 insertions(+)
>
> diff --git a/include/configs/kp_imx6q_tpc.h b/include/configs/kp_imx6q_tpc.h
> index b6b27ee1d5..ee9c56bc21 100644
> --- a/include/configs/kp_imx6q_tpc.h
> +++ b/include/configs/kp_imx6q_tpc.h
> @@ -89,11 +89,32 @@
> "rdinit=/sbin/init\0" \
> "addinitrd=setenv bootargs ${bootargs} rdinit=${rdinit} ${debug} \0" \
> "fit_config=mx6q_tpc70_conf\0" \
> + "uboot_file=u-boot.img\0" \
> + "SPL_file=SPL\0" \
> + "wic_file=kp-image-kpimx6qtpc.wic\0" \
Why don't you just generate a fitImage and use the fitupd for this ?
> "upd_image=st.4k\0" \
> "updargs=setenv bootargs console=${console} ${smp}"\
> "rdinit=${rdinit} ${debug} ${displayargs}\0" \
> "loadusb=usb start; " \
> "fatload usb 0 ${loadaddr} ${upd_image}\0" \
> + "upd_uboot_sd=" \
> + "if tftp ${loadaddr} ${uboot_file}; then " \
> + "setexpr blkc ${filesize} / 0x200;" \
> + "setexpr blkc ${blkc} + 1;" \
> + "mmc write ${loadaddr} 0x8A ${blkc};" \
> + "fi;\0" \
> + "upd_SPL_sd=" \
> + "if tftp ${loadaddr} ${SPL_file}; then " \
> + "setexpr blkc ${filesize} / 0x200;" \
> + "setexpr blkc ${blkc} + 1;" \
> + "mmc write ${loadaddr} 0x2 ${blkc};" \
> + "fi;\0" \
> + "upd_wic=" \
> + "if tftp ${loadaddr} ${wic_file}; then " \
> + "setexpr blkc ${filesize} / 0x200;" \
> + "setexpr blkc ${blkc} + 1;" \
> + "mmc write ${loadaddr} 0x0 ${blkc};" \
> + "fi;\0" \
> "usbupd=echo Booting update from usb ...; " \
> "setenv bootargs; " \
> "run updargs; " \
>
--
Best regards,
Marek Vasut
More information about the U-Boot
mailing list