[U-Boot] [RESENT PATCH v3] rockchip: update emmc/sd index for distro boot order

[Philipp Tomsich]

My gut feeling would be to fix the comment only.

> On 23.01.2019, at 03:14, Kever Yang <kever.yang at rock-chips.com> wrote:
> 
> Hi Philipp, Simon,
> 
>    Is it possible for this patch to be merged?
>    Right now, two board owner does not  like this patch but both of you says this patch do not affect your board, and most of other boards are maintained by me, and I have share why I need this patch and why this patch not affect so much very clearly in previous mail.
>     Please evaluate it again and close this topic, at least the original code comment "First try to boot from SD (index 0), then eMMC (index 1) " is not correct, something must be fixed.
> 
> Thanks,
> - Kever
> 
> Kever Yang <kever.yang at rock-chips.com <mailto:kever.yang at rock-chips.com>> 于2018年11月28日周三 上午10:06写道：
> According to the emmc/sdcard index in dts alias, emmc is always 0 and
> sdcard index is 1, let's update to using correct mmc number for distro
> boot order in common header.
> 
> SD card suppost to have higher priority so that people can boot into
> the firmware in SD card, this is very convenient for developer try with
> distro img from SUSE, Fedora and etc. Developer only need to 'dd' the
> Distro image(which id download from OS vendor release) into SD card without
> any modify and then we can boot it up directly.
> 
> Signed-off-by: Kever Yang <kever.yang at rock-chips.com <mailto:kever.yang at rock-chips.com>>
> ---
> 
> Changes in v3:
> - update the commit message
> Series-changes: 2
> - update the commit message
> 
>  include/configs/rockchip-common.h | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/include/configs/rockchip-common.h b/include/configs/rockchip-common.h
> index 68e1105a4b..8a72613e52 100644
> --- a/include/configs/rockchip-common.h
> +++ b/include/configs/rockchip-common.h
> @@ -11,11 +11,11 @@
> 
>  #ifndef CONFIG_SPL_BUILD
> 
> -/* First try to boot from SD (index 0), then eMMC (index 1) */
> +/* First try to boot from SD (index 1), then eMMC (index 0) */
>  #if CONFIG_IS_ENABLED(CMD_MMC)
>         #define BOOT_TARGET_MMC(func) \
> -               func(MMC, mmc, 0) \
> -               func(MMC, mmc, 1)
> +               func(MMC, mmc, 1) \
> +               func(MMC, mmc, 0)
>  #else
>         #define BOOT_TARGET_MMC(func)
>  #endif
> -- 
> 2.18.0
>