[U-Boot] [PATCH 1/1] LX2160AQDS: Adds SECURE_BOOT defconfig.

Udit Agarwal udit.agarwal at nxp.com
Fri Jan 4 05:37:17 UTC 2019


Configs added to enable secure boot on LX2160AQDS board.

Signed-off-by: Udit Agarwal <udit.agarwal at nxp.com>
---
 configs/lx2160aqds_tfa_SECURE_BOOT_defconfig | 90 ++++++++++++++++++++
 1 file changed, 90 insertions(+)
 create mode 100644 configs/lx2160aqds_tfa_SECURE_BOOT_defconfig

diff --git a/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig b/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig
new file mode 100644
index 0000000000..c53a7ac350
--- /dev/null
+++ b/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig
@@ -0,0 +1,90 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LX2160AQDS=y
+CONFIG_SYS_TEXT_BASE=0x82000000
+CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
+CONFIG_SECURE_BOOT=y
+CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-lx2160a-qds"
+CONFIG_NR_DRAM_BANKS=3
+CONFIG_DM=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_TFABOOT=y
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyAMA0,115200 root=/dev/ram0 earlycon=pl011,mmio32,0x21c0000 ramdisk_size=0x2000000 default_hugepagesz=1024m hugepagesz=1024m hugepages=2 pci=pcie_bus_perf"
+# CONFIG_USE_BOOTCOMMAND is not set
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_EEPROM=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_CACHE=y
+CONFIG_MP=y
+CONFIG_OF_CONTROL=y
+CONFIG_ENV_IS_NOWHERE=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM_SERIAL=y
+CONFIG_SERIAL_PROBE_ALL=y
+CONFIG_CONS_INDEX=0
+CONFIG_FSL_CAAM=y
+CONFIG_FSL_ESDHC=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_MICRON=y
+CONFIG_SPI_FLASH_USE_4K_SECTORS=n
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_SST=y
+CONFIG_SPI_FLASH_EON=y
+CONFIG_NXP_FSPI=y
+CONFIG_FSL_DSPI=y
+CONFIG_FSPI_AHB_EN_4BYTE=y
+CONFIG_SYS_FSPI_AHB_INIT=y
+CONFIG_PHYLIB=y
+CONFIG_NETDEVICES=y
+CONFIG_PHY_GIGE=y
+CONFIG_CMD_NET=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_PXE=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_EXT2=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCIE_LX=y
+CONFIG_E1000=y
+CONFIG_NET=y
+CONFIG_DM_MMC=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_STORAGE=y
+CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_SCSI_AHCI=y
+CONFIG_SCSI=y
+# CONFIG_SYS_FSL_DDR_PHY is not set
+CONFIG_SYS_GEN2_DDR_PHY=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x6000
+CONFIG_PHYLIB_10G=y
+CONFIG_PHY_AQUANTIA=y # X-M11-USXGMII
+CONFIG_PHY_CORTINA=y # X-M7-40G
+CONFIG_PHY_REALTEK=y # RGMII
+CONFIG_PHY_INPHI=y # X-M8-100G
+CONFIG_PHY_VITESSE=y # SGMII PEX RISER
+CONFIG_HUSH_PARSER=y
+CONFIG_DM_SCSI=y
+CONFIG_SATA_CEVA=y
+CONFIG_AHCI=y
+CONFIG_RSA=y
+CONFIG_SPL_RSA=y
+CONFIG_RSA_SOFTWARE_EXP=y
-- 
2.17.1



More information about the U-Boot mailing list