[U-Boot] [PATCH v2] video: Armada XP: Move driver to DM_VIDEO
Stefan Roese
sr at denx.de
Wed Jan 30 07:54:11 UTC 2019
This patch moves the Armada XP video / LCD driver to DM_VIDEO. With this
move, the legacy interface board_video_init() is removed from the
theadorable board code (only user of this video driver). The support
via DT will be added in a separate patch.
This patch also enables DM_VIDEO for the theadorable board, as this is
needed to not break git bisect'ability.
Signed-off-by: Stefan Roese <sr at denx.de>
Reviewed-by: Anatolij Gustschin <agust at denx.de>
---
v2:
- Add DM_VIDEO in theadorable_debug_defconfig in this patch
arch/arm/mach-mvebu/include/mach/cpu.h | 12 -
board/theadorable/theadorable.c | 16 --
configs/theadorable_debug_defconfig | 3 +-
drivers/video/mvebu_lcd.c | 321 +++++++++++++++----------
4 files changed, 193 insertions(+), 159 deletions(-)
diff --git a/arch/arm/mach-mvebu/include/mach/cpu.h b/arch/arm/mach-mvebu/include/mach/cpu.h
index 85d7dd1610..9e23043a48 100644
--- a/arch/arm/mach-mvebu/include/mach/cpu.h
+++ b/arch/arm/mach-mvebu/include/mach/cpu.h
@@ -158,18 +158,6 @@ int serdes_phy_config(void);
*/
int ddr3_init(void);
-struct mvebu_lcd_info {
- u32 fb_base;
- int x_res;
- int y_res;
- int x_fp; /* frontporch */
- int y_fp;
- int x_bp; /* backporch */
- int y_bp;
-};
-
-int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info);
-
/*
* get_ref_clk
*
diff --git a/board/theadorable/theadorable.c b/board/theadorable/theadorable.c
index 1169d67746..acd46b0026 100644
--- a/board/theadorable/theadorable.c
+++ b/board/theadorable/theadorable.c
@@ -222,22 +222,6 @@ int board_eth_init(bd_t *bis)
}
#endif
-int board_video_init(void)
-{
- struct mvebu_lcd_info lcd_info;
-
- /* Reserved memory area via CONFIG_SYS_MEM_TOP_HIDE */
- lcd_info.fb_base = gd->ram_size;
- lcd_info.x_res = 240;
- lcd_info.x_fp = 1;
- lcd_info.x_bp = 45;
- lcd_info.y_res = 320;
- lcd_info.y_fp = 1;
- lcd_info.y_bp = 3;
-
- return mvebu_lcd_register_init(&lcd_info);
-}
-
#ifdef CONFIG_BOARD_LATE_INIT
int board_late_init(void)
{
diff --git a/configs/theadorable_debug_defconfig b/configs/theadorable_debug_defconfig
index ac6dfd6844..a7d02e957a 100644
--- a/configs/theadorable_debug_defconfig
+++ b/configs/theadorable_debug_defconfig
@@ -71,6 +71,5 @@ CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
+CONFIG_DM_VIDEO=y
CONFIG_VIDEO_MVEBU=y
-CONFIG_VIDEO=y
-# CONFIG_VIDEO_SW_CURSOR is not set
diff --git a/drivers/video/mvebu_lcd.c b/drivers/video/mvebu_lcd.c
index 5bf0d01faa..dc6254514a 100644
--- a/drivers/video/mvebu_lcd.c
+++ b/drivers/video/mvebu_lcd.c
@@ -6,74 +6,96 @@
*/
#include <common.h>
-#include <video_fb.h>
+#include <dm.h>
+#include <video.h>
#include <linux/mbus.h>
#include <asm/io.h>
#include <asm/arch/cpu.h>
#include <asm/arch/soc.h>
-#define MVEBU_LCD_WIN_CONTROL(w) (MVEBU_LCD_BASE + 0xf000 + ((w) << 4))
-#define MVEBU_LCD_WIN_BASE(w) (MVEBU_LCD_BASE + 0xf004 + ((w) << 4))
-#define MVEBU_LCD_WIN_REMAP(w) (MVEBU_LCD_BASE + 0xf00c + ((w) << 4))
-
-#define MVEBU_LCD_CFG_DMA_START_ADDR_0 (MVEBU_LCD_BASE + 0x00cc)
-#define MVEBU_LCD_CFG_DMA_START_ADDR_1 (MVEBU_LCD_BASE + 0x00dc)
-
-#define MVEBU_LCD_CFG_GRA_START_ADDR0 (MVEBU_LCD_BASE + 0x00f4)
-#define MVEBU_LCD_CFG_GRA_START_ADDR1 (MVEBU_LCD_BASE + 0x00f8)
-#define MVEBU_LCD_CFG_GRA_PITCH (MVEBU_LCD_BASE + 0x00fc)
-#define MVEBU_LCD_SPU_GRA_OVSA_HPXL_VLN (MVEBU_LCD_BASE + 0x0100)
-#define MVEBU_LCD_SPU_GRA_HPXL_VLN (MVEBU_LCD_BASE + 0x0104)
-#define MVEBU_LCD_SPU_GZM_HPXL_VLN (MVEBU_LCD_BASE + 0x0108)
-#define MVEBU_LCD_SPU_HWC_OVSA_HPXL_VLN (MVEBU_LCD_BASE + 0x010c)
-#define MVEBU_LCD_SPU_HWC_HPXL_VLN (MVEBU_LCD_BASE + 0x0110)
-#define MVEBU_LCD_SPUT_V_H_TOTAL (MVEBU_LCD_BASE + 0x0114)
-#define MVEBU_LCD_SPU_V_H_ACTIVE (MVEBU_LCD_BASE + 0x0118)
-#define MVEBU_LCD_SPU_H_PORCH (MVEBU_LCD_BASE + 0x011c)
-#define MVEBU_LCD_SPU_V_PORCH (MVEBU_LCD_BASE + 0x0120)
-#define MVEBU_LCD_SPU_BLANKCOLOR (MVEBU_LCD_BASE + 0x0124)
-#define MVEBU_LCD_SPU_ALPHA_COLOR1 (MVEBU_LCD_BASE + 0x0128)
-#define MVEBU_LCD_SPU_ALPHA_COLOR2 (MVEBU_LCD_BASE + 0x012c)
-#define MVEBU_LCD_SPU_COLORKEY_Y (MVEBU_LCD_BASE + 0x0130)
-#define MVEBU_LCD_SPU_COLORKEY_U (MVEBU_LCD_BASE + 0x0134)
-#define MVEBU_LCD_SPU_COLORKEY_V (MVEBU_LCD_BASE + 0x0138)
-#define MVEBU_LCD_CFG_RDREG4F (MVEBU_LCD_BASE + 0x013c)
-#define MVEBU_LCD_SPU_SPI_RXDATA (MVEBU_LCD_BASE + 0x0140)
-#define MVEBU_LCD_SPU_ISA_RXDATA (MVEBU_LCD_BASE + 0x0144)
-#define MVEBU_LCD_SPU_DBG_ISA (MVEBU_LCD_BASE + 0x0148)
-
-#define MVEBU_LCD_SPU_HWC_RDDAT (MVEBU_LCD_BASE + 0x0158)
-#define MVEBU_LCD_SPU_GAMMA_RDDAT (MVEBU_LCD_BASE + 0x015c)
-#define MVEBU_LCD_SPU_PALETTE_RDDAT (MVEBU_LCD_BASE + 0x0160)
-#define MVEBU_LCD_SPU_IOPAD_IN (MVEBU_LCD_BASE + 0x0178)
-#define MVEBU_LCD_FRAME_COUNT (MVEBU_LCD_BASE + 0x017c)
-#define MVEBU_LCD_SPU_DMA_CTRL0 (MVEBU_LCD_BASE + 0x0190)
-#define MVEBU_LCD_SPU_DMA_CTRL1 (MVEBU_LCD_BASE + 0x0194)
-#define MVEBU_LCD_SPU_SRAM_CTRL (MVEBU_LCD_BASE + 0x0198)
-#define MVEBU_LCD_SPU_SRAM_WRDAT (MVEBU_LCD_BASE + 0x019c)
-#define MVEBU_LCD_SPU_SRAM_PARA0 (MVEBU_LCD_BASE + 0x01a0)
-#define MVEBU_LCD_SPU_SRAM_PARA1 (MVEBU_LCD_BASE + 0x01a4)
-#define MVEBU_LCD_CFG_SCLK_DIV (MVEBU_LCD_BASE + 0x01a8)
-#define MVEBU_LCD_SPU_CONTRAST (MVEBU_LCD_BASE + 0x01ac)
-#define MVEBU_LCD_SPU_SATURATION (MVEBU_LCD_BASE + 0x01b0)
-#define MVEBU_LCD_SPU_CBSH_HUE (MVEBU_LCD_BASE + 0x01b4)
-#define MVEBU_LCD_SPU_DUMB_CTRL (MVEBU_LCD_BASE + 0x01b8)
-#define MVEBU_LCD_SPU_IOPAD_CONTROL (MVEBU_LCD_BASE + 0x01bc)
-#define MVEBU_LCD_SPU_IRQ_ENA_2 (MVEBU_LCD_BASE + 0x01d8)
-#define MVEBU_LCD_SPU_IRQ_ISR_2 (MVEBU_LCD_BASE + 0x01dc)
-#define MVEBU_LCD_SPU_IRQ_ENA (MVEBU_LCD_BASE + 0x01c0)
-#define MVEBU_LCD_SPU_IRQ_ISR (MVEBU_LCD_BASE + 0x01c4)
-#define MVEBU_LCD_ADLL_CTRL (MVEBU_LCD_BASE + 0x01c8)
-#define MVEBU_LCD_CLK_DIS (MVEBU_LCD_BASE + 0x01cc)
-#define MVEBU_LCD_VGA_HVSYNC_DELAY (MVEBU_LCD_BASE + 0x01d4)
-#define MVEBU_LCD_CLK_CFG_0 (MVEBU_LCD_BASE + 0xf0a0)
-#define MVEBU_LCD_CLK_CFG_1 (MVEBU_LCD_BASE + 0xf0a4)
-#define MVEBU_LCD_LVDS_CLK_CFG (MVEBU_LCD_BASE + 0xf0ac)
+#define MVEBU_LCD_WIN_CONTROL(w) (0xf000 + ((w) << 4))
+#define MVEBU_LCD_WIN_BASE(w) (0xf004 + ((w) << 4))
+#define MVEBU_LCD_WIN_REMAP(w) (0xf00c + ((w) << 4))
+
+#define MVEBU_LCD_CFG_DMA_START_ADDR_0 0x00cc
+#define MVEBU_LCD_CFG_DMA_START_ADDR_1 0x00dc
+
+#define MVEBU_LCD_CFG_GRA_START_ADDR0 0x00f4
+#define MVEBU_LCD_CFG_GRA_START_ADDR1 0x00f8
+#define MVEBU_LCD_CFG_GRA_PITCH 0x00fc
+#define MVEBU_LCD_SPU_GRA_OVSA_HPXL_VLN 0x0100
+#define MVEBU_LCD_SPU_GRA_HPXL_VLN 0x0104
+#define MVEBU_LCD_SPU_GZM_HPXL_VLN 0x0108
+#define MVEBU_LCD_SPU_HWC_OVSA_HPXL_VLN 0x010c
+#define MVEBU_LCD_SPU_HWC_HPXL_VLN 0x0110
+#define MVEBU_LCD_SPUT_V_H_TOTAL 0x0114
+#define MVEBU_LCD_SPU_V_H_ACTIVE 0x0118
+#define MVEBU_LCD_SPU_H_PORCH 0x011c
+#define MVEBU_LCD_SPU_V_PORCH 0x0120
+#define MVEBU_LCD_SPU_BLANKCOLOR 0x0124
+#define MVEBU_LCD_SPU_ALPHA_COLOR1 0x0128
+#define MVEBU_LCD_SPU_ALPHA_COLOR2 0x012c
+#define MVEBU_LCD_SPU_COLORKEY_Y 0x0130
+#define MVEBU_LCD_SPU_COLORKEY_U 0x0134
+#define MVEBU_LCD_SPU_COLORKEY_V 0x0138
+#define MVEBU_LCD_CFG_RDREG4F 0x013c
+#define MVEBU_LCD_SPU_SPI_RXDATA 0x0140
+#define MVEBU_LCD_SPU_ISA_RXDATA 0x0144
+#define MVEBU_LCD_SPU_DBG_ISA 0x0148
+
+#define MVEBU_LCD_SPU_HWC_RDDAT 0x0158
+#define MVEBU_LCD_SPU_GAMMA_RDDAT 0x015c
+#define MVEBU_LCD_SPU_PALETTE_RDDAT 0x0160
+#define MVEBU_LCD_SPU_IOPAD_IN 0x0178
+#define MVEBU_LCD_FRAME_COUNT 0x017c
+#define MVEBU_LCD_SPU_DMA_CTRL0 0x0190
+#define MVEBU_LCD_SPU_DMA_CTRL1 0x0194
+#define MVEBU_LCD_SPU_SRAM_CTRL 0x0198
+#define MVEBU_LCD_SPU_SRAM_WRDAT 0x019c
+#define MVEBU_LCD_SPU_SRAM_PARA0 0x01a0
+#define MVEBU_LCD_SPU_SRAM_PARA1 0x01a4
+#define MVEBU_LCD_CFG_SCLK_DIV 0x01a8
+#define MVEBU_LCD_SPU_CONTRAST 0x01ac
+#define MVEBU_LCD_SPU_SATURATION 0x01b0
+#define MVEBU_LCD_SPU_CBSH_HUE 0x01b4
+#define MVEBU_LCD_SPU_DUMB_CTRL 0x01b8
+#define MVEBU_LCD_SPU_IOPAD_CONTROL 0x01bc
+#define MVEBU_LCD_SPU_IRQ_ENA_2 0x01d8
+#define MVEBU_LCD_SPU_IRQ_ISR_2 0x01dc
+#define MVEBU_LCD_SPU_IRQ_ENA 0x01c0
+#define MVEBU_LCD_SPU_IRQ_ISR 0x01c4
+#define MVEBU_LCD_ADLL_CTRL 0x01c8
+#define MVEBU_LCD_CLK_DIS 0x01cc
+#define MVEBU_LCD_VGA_HVSYNC_DELAY 0x01d4
+#define MVEBU_LCD_CLK_CFG_0 0xf0a0
+#define MVEBU_LCD_CLK_CFG_1 0xf0a4
+#define MVEBU_LCD_LVDS_CLK_CFG 0xf0ac
#define MVEBU_LVDS_PADS_REG (MVEBU_SYSTEM_REG_BASE + 0xf0)
+enum {
+ /* Maximum LCD size we support */
+ LCD_MAX_WIDTH = 640,
+ LCD_MAX_HEIGHT = 480,
+ LCD_MAX_LOG2_BPP = VIDEO_BPP16,
+};
+
+struct mvebu_lcd_info {
+ u32 fb_base;
+ int x_res;
+ int y_res;
+ int x_fp;
+ int y_fp;
+ int x_bp;
+ int y_bp;
+};
+
+struct mvebu_video_priv {
+ uintptr_t regs;
+};
+
/* Setup Mbus Bridge Windows for LCD */
-static void mvebu_lcd_conf_mbus_registers(void)
+static void mvebu_lcd_conf_mbus_registers(uintptr_t regs)
{
const struct mbus_dram_target_info *dram;
int i;
@@ -82,9 +104,9 @@ static void mvebu_lcd_conf_mbus_registers(void)
/* Disable windows, set size/base/remap to 0 */
for (i = 0; i < 6; i++) {
- writel(0, MVEBU_LCD_WIN_CONTROL(i));
- writel(0, MVEBU_LCD_WIN_BASE(i));
- writel(0, MVEBU_LCD_WIN_REMAP(i));
+ writel(0, regs + MVEBU_LCD_WIN_CONTROL(i));
+ writel(0, regs + MVEBU_LCD_WIN_BASE(i));
+ writel(0, regs + MVEBU_LCD_WIN_REMAP(i));
}
/* Write LCD bridge window registers */
@@ -92,14 +114,15 @@ static void mvebu_lcd_conf_mbus_registers(void)
const struct mbus_dram_window *cs = dram->cs + i;
writel(((cs->size - 1) & 0xffff0000) | (cs->mbus_attr << 8) |
(dram->mbus_dram_target_id << 4) | 1,
- MVEBU_LCD_WIN_CONTROL(i));
+ regs + MVEBU_LCD_WIN_CONTROL(i));
- writel(cs->base & 0xffff0000, MVEBU_LCD_WIN_BASE(i));
+ writel(cs->base & 0xffff0000, regs + MVEBU_LCD_WIN_BASE(i));
}
}
/* Initialize LCD registers */
-int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info)
+static void mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info,
+ uintptr_t regs)
{
/* Local variable for easier handling */
int x = lcd_info->x_res;
@@ -107,7 +130,7 @@ int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info)
u32 val;
/* Setup Mbus Bridge Windows */
- mvebu_lcd_conf_mbus_registers();
+ mvebu_lcd_conf_mbus_registers(regs);
/*
* Set LVDS Pads Control Register
@@ -121,8 +144,8 @@ int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info)
* end (currently 1GB-64MB but also may be 2GB-64MB).
* See also the Window 0 settings!
*/
- writel(lcd_info->fb_base, MVEBU_LCD_CFG_GRA_START_ADDR0);
- writel(lcd_info->fb_base, MVEBU_LCD_CFG_GRA_START_ADDR1);
+ writel(lcd_info->fb_base, regs + MVEBU_LCD_CFG_GRA_START_ADDR0);
+ writel(lcd_info->fb_base, regs + MVEBU_LCD_CFG_GRA_START_ADDR1);
/*
* Set the LCD_CFG_GRA_PITCH Register
@@ -132,14 +155,14 @@ int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info)
* Bits 15-00: Line Length in Bytes
* 240*2 (for RGB1555)=480=0x1E0
*/
- writel(0x80100000 + 2 * x, MVEBU_LCD_CFG_GRA_PITCH);
+ writel(0x80100000 + 2 * x, regs + MVEBU_LCD_CFG_GRA_PITCH);
/*
* Set the LCD_SPU_GRA_OVSA_HPXL_VLN Register
* Bits 31-16: Vertical start of graphical overlay on screen
* Bits 15-00: Horizontal start of graphical overlay on screen
*/
- writel(0x00000000, MVEBU_LCD_SPU_GRA_OVSA_HPXL_VLN);
+ writel(0x00000000, regs + MVEBU_LCD_SPU_GRA_OVSA_HPXL_VLN);
/*
* Set the LCD_SPU_GRA_HPXL_VLN Register
@@ -147,7 +170,7 @@ int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info)
* Bits 15-00: Horizontal size of graphical overlay 240=0xF0
* Values before zooming
*/
- writel((y << 16) | x, MVEBU_LCD_SPU_GRA_HPXL_VLN);
+ writel((y << 16) | x, regs + MVEBU_LCD_SPU_GRA_HPXL_VLN);
/*
* Set the LCD_SPU_GZM_HPXL_VLN Register
@@ -155,21 +178,21 @@ int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info)
* Bits 15-00: Horizontal size of graphical overlay 240=0xF0
* Values after zooming
*/
- writel((y << 16) | x, MVEBU_LCD_SPU_GZM_HPXL_VLN);
+ writel((y << 16) | x, regs + MVEBU_LCD_SPU_GZM_HPXL_VLN);
/*
* Set the LCD_SPU_HWC_OVSA_HPXL_VLN Register
* Bits 31-16: Vertical position of HW Cursor 320=0x140
* Bits 15-00: Horizontal position of HW Cursor 240=0xF0
*/
- writel((y << 16) | x, MVEBU_LCD_SPU_HWC_OVSA_HPXL_VLN);
+ writel((y << 16) | x, regs + MVEBU_LCD_SPU_HWC_OVSA_HPXL_VLN);
/*
* Set the LCD_SPU_HWC_OVSA_HPXL_VLN Register
* Bits 31-16: Vertical size of HW Cursor
* Bits 15-00: Horizontal size of HW Cursor
*/
- writel(0x00000000, MVEBU_LCD_SPU_HWC_HPXL_VLN);
+ writel(0x00000000, regs + MVEBU_LCD_SPU_HWC_HPXL_VLN);
/*
* Set the LCD_SPU_HWC_OVSA_HPXL_VLN Register
@@ -191,14 +214,14 @@ int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info)
*/
val = ((y + lcd_info->y_fp + lcd_info->y_bp + 1) << 16) |
(x + lcd_info->x_fp + lcd_info->x_bp + 1);
- writel(val, MVEBU_LCD_SPUT_V_H_TOTAL);
+ writel(val, regs + MVEBU_LCD_SPUT_V_H_TOTAL);
/*
* Set the LCD_SPU_V_H_ACTIVE Register
* Bits 31-16: Screen active vertical lines 320=0x140
* Bits 15-00: Screen active horizontakl pixels 240=0x00F0
*/
- writel((y << 16) | x, MVEBU_LCD_SPU_V_H_ACTIVE);
+ writel((y << 16) | x, regs + MVEBU_LCD_SPU_V_H_ACTIVE);
/*
* Set the LCD_SPU_H_PORCH Register
@@ -207,7 +230,8 @@ int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info)
* Note: The terms "front" and "back" for the Marvell seem to be
* exactly opposite to the display.
*/
- writel((lcd_info->x_fp << 16) | lcd_info->x_bp, MVEBU_LCD_SPU_H_PORCH);
+ writel((lcd_info->x_fp << 16) | lcd_info->x_bp,
+ regs + MVEBU_LCD_SPU_H_PORCH);
/*
* Set the LCD_SPU_V_PORCH Register
@@ -216,14 +240,15 @@ int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info)
* Note: The terms "front" and "back" for the Marvell seem to be exactly
* opposite to the display.
*/
- writel((lcd_info->y_fp << 16) | lcd_info->y_bp, MVEBU_LCD_SPU_V_PORCH);
+ writel((lcd_info->y_fp << 16) | lcd_info->y_bp,
+ regs + MVEBU_LCD_SPU_V_PORCH);
/*
* Set the LCD_SPU_BLANKCOLOR Register
* This should be black = 0
* For tests this is magenta=00FF00FF
*/
- writel(0x00FF00FF, MVEBU_LCD_SPU_BLANKCOLOR);
+ writel(0x00FF00FF, regs + MVEBU_LCD_SPU_BLANKCOLOR);
/*
* Registers in the range of 0x0128 to 0x012C are colors for the cursor
@@ -240,7 +265,7 @@ int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info)
* Bit 8: FIFO watermark for DMA: 0=disable
* Bits 07-00: Empty 8B FIFO entries to trigger DMA, default=0x80
*/
- writel(0x00000780, MVEBU_LCD_CFG_RDREG4F);
+ writel(0x00000780, regs + MVEBU_LCD_CFG_RDREG4F);
/*
* Set the LCD_SPU_DMACTRL 0 Register
@@ -271,7 +296,7 @@ int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info)
* Bit 01: Video YUV to RGB Conversion: 0=disable
* Bit 00: Video Transfer: 0=disable
*/
- writel(0x88111100, MVEBU_LCD_SPU_DMA_CTRL0);
+ writel(0x88111100, regs + MVEBU_LCD_SPU_DMA_CTRL0);
/*
* Set the LCD_SPU_DMA_CTRL1 Register
@@ -288,7 +313,7 @@ int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info)
* Bits 15-08: Configure Alpha: 0x00.
* Bits 07-00: Reserved.
*/
- writel(0x20010000, MVEBU_LCD_SPU_DMA_CTRL1);
+ writel(0x20010000, regs + MVEBU_LCD_SPU_DMA_CTRL1);
/*
* Set the LCD_SPU_SRAM_CTRL Register
@@ -297,14 +322,14 @@ int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info)
* Bits 11-08: SRAM address ID: 0=gamma_yr, 1=gammy_ug, 2=gamma_vb,
* 3=palette, 15=cursor
*/
- writel(0x0000C000, MVEBU_LCD_SPU_SRAM_CTRL);
+ writel(0x0000C000, regs + MVEBU_LCD_SPU_SRAM_CTRL);
/*
* LCD_SPU_SRAM_WRDAT register: 019C
* LCD_SPU_SRAM_PARA0 register: 01A0
* LCD_SPU_SRAM_PARA1 register: 01A4 - Cursor control/Power settings
*/
- writel(0x00000000, MVEBU_LCD_SPU_SRAM_PARA1);
+ writel(0x00000000, regs + MVEBU_LCD_SPU_SRAM_PARA1);
/* Clock settings in the at 01A8 and in the range F0A0 see below */
@@ -314,21 +339,21 @@ int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info)
* Bits 31-16: Brightness sign ext. 8-bit value +255 to -255: default=0
* Bits 15-00: Contrast sign ext. 8-bit value +255 to -255: default=0
*/
- writel(0x00000000, MVEBU_LCD_SPU_CONTRAST);
+ writel(0x00000000, regs + MVEBU_LCD_SPU_CONTRAST);
/*
* Set LCD_SPU_SATURATION
* Bits 31-16: Multiplier signed 4.12 fixed point value
* Bits 15-00: Saturation signed 4.12 fixed point value
*/
- writel(0x10001000, MVEBU_LCD_SPU_SATURATION);
+ writel(0x10001000, regs + MVEBU_LCD_SPU_SATURATION);
/*
* Set LCD_SPU_HUE
* Bits 31-16: Sine signed 2.14 fixed point value
* Bits 15-00: Cosine signed 2.14 fixed point value
*/
- writel(0x00000000, MVEBU_LCD_SPU_CBSH_HUE);
+ writel(0x00000000, regs + MVEBU_LCD_SPU_CBSH_HUE);
/*
* Set LCD_SPU_DUMB_CTRL
@@ -348,7 +373,7 @@ int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info)
* Question: Do we have to disable Smart and Dumb LCD
* and separately enable LVDS?
*/
- writel(0x6000080F, MVEBU_LCD_SPU_DUMB_CTRL);
+ writel(0x6000080F, regs + MVEBU_LCD_SPU_DUMB_CTRL);
/*
* Set LCD_SPU_IOPAD_CTRL
@@ -366,17 +391,17 @@ int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info)
* 128 Bytes burst
* Bits 03-00: LCD pins: ??? 0=24-bit Dump panel ??
*/
- writel(0x000000C0, MVEBU_LCD_SPU_IOPAD_CONTROL);
+ writel(0x000000C0, regs + MVEBU_LCD_SPU_IOPAD_CONTROL);
/*
* Set SUP_IRQ_ENA_2: Disable all interrupts
*/
- writel(0x00000000, MVEBU_LCD_SPU_IRQ_ENA_2);
+ writel(0x00000000, regs + MVEBU_LCD_SPU_IRQ_ENA_2);
/*
* Set SUP_IRQ_ENA: Disable all interrupts.
*/
- writel(0x00000000, MVEBU_LCD_SPU_IRQ_ENA);
+ writel(0x00000000, regs + MVEBU_LCD_SPU_IRQ_ENA);
/*
* Set up ADDL Control Register
@@ -399,19 +424,19 @@ int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info)
* Bits 05-00: Delay taps, 0x3F=Half Cycle, 0x00=No delay
* Note: ADLL is used for a VGA interface with DAC - not used here
*/
- writel(0x00000000, MVEBU_LCD_ADLL_CTRL);
+ writel(0x00000000, regs + MVEBU_LCD_ADLL_CTRL);
/*
* Set the LCD_CLK_DIS Register:
* Bits 3 and 4 must be 1
*/
- writel(0x00000018, MVEBU_LCD_CLK_DIS);
+ writel(0x00000018, regs + MVEBU_LCD_CLK_DIS);
/*
* Set the LCD_VGA_HSYNC/VSYNC Delay Register:
* Bits 03-00: Sets the delay for the HSYNC and VSYNC signals
*/
- writel(0x00000000, MVEBU_LCD_VGA_HVSYNC_DELAY);
+ writel(0x00000000, regs + MVEBU_LCD_VGA_HVSYNC_DELAY);
/*
* Clock registers
@@ -423,12 +448,12 @@ int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info)
/*
* Disable PLL, see "LCD Clock Configuration 1 Register" below
*/
- writel(0x8FF40007, MVEBU_LCD_CLK_CFG_1);
+ writel(0x8FF40007, regs + MVEBU_LCD_CLK_CFG_1);
/*
* Powerdown, see "LCD Clock Configuration 0 Register" below
*/
- writel(0x94000174, MVEBU_LCD_CLK_CFG_0);
+ writel(0x94000174, regs + MVEBU_LCD_CLK_CFG_0);
/*
* Set the LCD_CFG_SCLK_DIV Register
@@ -437,7 +462,7 @@ int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info)
* Bits 15-01: Clock Divider: Bypass for LVDS=0x0001
* See page 475 in section 28.5.
*/
- writel(0x80000001, MVEBU_LCD_CFG_SCLK_DIV);
+ writel(0x80000001, regs + MVEBU_LCD_CFG_SCLK_DIV);
/*
* Set the LCD Clock Configuration 0 Register:
@@ -452,7 +477,7 @@ int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info)
* N=28=0x1C => 0x1B
* Bits 03-00: R1_CTRL (for N=28 => 0x4)
*/
- writel(0x940021B4, MVEBU_LCD_CLK_CFG_0);
+ writel(0x940021B4, regs + MVEBU_LCD_CLK_CFG_0);
/*
* Set the LCD Clock Configuration 1 Register:
@@ -465,7 +490,7 @@ int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info)
* Bits 12-00: PLL Full Divider [Note: Assumed to be the Post-Divider
* M' for LVDS=7!]
*/
- writel(0x8FF40007, MVEBU_LCD_CLK_CFG_1);
+ writel(0x8FF40007, regs + MVEBU_LCD_CLK_CFG_1);
/*
* Set the LVDS Clock Configuration Register:
@@ -479,12 +504,12 @@ int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info)
* Note: Bits 0 and must be verified with the help of the
* Interface/display
*/
- writel(0xC0000201, MVEBU_LCD_LVDS_CLK_CFG);
+ writel(0xC0000201, regs + MVEBU_LCD_LVDS_CLK_CFG);
/*
* Power up PLL (Clock Config 0)
*/
- writel(0x140021B4, MVEBU_LCD_CLK_CFG_0);
+ writel(0x140021B4, regs + MVEBU_LCD_CLK_CFG_0);
/* wait 10 ms */
mdelay(10);
@@ -492,40 +517,78 @@ int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info)
/*
* Enable PLL (Clock Config 1)
*/
- writel(0x8FF60007, MVEBU_LCD_CLK_CFG_1);
-
- return 0;
+ writel(0x8FF60007, regs + MVEBU_LCD_CLK_CFG_1);
}
-int __weak board_video_init(void)
+static int mvebu_video_probe(struct udevice *dev)
{
- return -1;
-}
+ struct video_uc_platdata *plat = dev_get_uclass_platdata(dev);
+ struct video_priv *uc_priv = dev_get_uclass_priv(dev);
+ struct mvebu_video_priv *priv = dev_get_priv(dev);
+ struct mvebu_lcd_info lcd_info;
+ struct display_timing timings;
+ u32 fb_start, fb_end;
+ int ret;
+
+ priv->regs = dev_read_addr(dev);
+ if (priv->regs == FDT_ADDR_T_NONE) {
+ dev_err(dev, "failed to get LCD address\n");
+ return -ENXIO;
+ }
-void *video_hw_init(void)
-{
- static GraphicDevice mvebufb;
- GraphicDevice *pGD = &mvebufb;
- u32 val;
+ ret = ofnode_decode_display_timing(dev_ofnode(dev), 0, &timings);
+ if (ret) {
+ dev_err(dev, "failed to get any display timings\n");
+ return -EINVAL;
+ }
- /*
- * The board code needs to call mvebu_lcd_register_init()
- * in its board_video_init() implementation, with the board
- * specific parameters for its LCD.
- */
- if (board_video_init() || !readl(MVEBU_LCD_CFG_GRA_START_ADDR0))
- return NULL;
+ /* Use DT timing (resolution) in internal info struct */
+ lcd_info.fb_base = plat->base;
+ lcd_info.x_res = timings.hactive.typ;
+ lcd_info.x_fp = timings.hfront_porch.typ;
+ lcd_info.x_bp = timings.hback_porch.typ;
+ lcd_info.y_res = timings.vactive.typ;
+ lcd_info.y_fp = timings.vfront_porch.typ;
+ lcd_info.y_bp = timings.vback_porch.typ;
+
+ /* Initialize the LCD controller */
+ mvebu_lcd_register_init(&lcd_info, priv->regs);
+
+ /* Enable dcache for the frame buffer */
+ fb_start = plat->base & ~(MMU_SECTION_SIZE - 1);
+ fb_end = plat->base + plat->size;
+ fb_end = ALIGN(fb_end, 1 << MMU_SECTION_SHIFT);
+ mmu_set_region_dcache_behaviour(fb_start, fb_end - fb_start,
+ DCACHE_WRITEBACK);
+ video_set_flush_dcache(dev, true);
+
+ uc_priv->xsize = lcd_info.x_res;
+ uc_priv->ysize = lcd_info.y_res;
+ uc_priv->bpix = VIDEO_BPP16; /* Uses RGB555 format */
+
+ return 0;
+}
- /* Provide the necessary values for the U-Boot video IF */
- val = readl(MVEBU_LCD_SPU_V_H_ACTIVE);
- pGD->winSizeY = val >> 16;
- pGD->winSizeX = val & 0x0000ffff;
- pGD->gdfBytesPP = 2;
- pGD->gdfIndex = GDF_15BIT_555RGB;
- pGD->frameAdrs = readl(MVEBU_LCD_CFG_GRA_START_ADDR0);
+static int mvebu_video_bind(struct udevice *dev)
+{
+ struct video_uc_platdata *plat = dev_get_uclass_platdata(dev);
- debug("LCD: buffer at 0x%08x resolution %dx%d\n", pGD->frameAdrs,
- pGD->winSizeX, pGD->winSizeY);
+ plat->size = LCD_MAX_WIDTH * LCD_MAX_HEIGHT *
+ (1 << LCD_MAX_LOG2_BPP) / 8;
- return pGD;
+ return 0;
}
+
+static const struct udevice_id mvebu_video_ids[] = {
+ { .compatible = "marvell,armada-xp-lcd" },
+ { }
+};
+
+U_BOOT_DRIVER(mvebu_video) = {
+ .name = "mvebu_video",
+ .id = UCLASS_VIDEO,
+ .of_match = mvebu_video_ids,
+ .bind = mvebu_video_bind,
+ .probe = mvebu_video_probe,
+ .priv_auto_alloc_size = sizeof(struct mvebu_video_priv),
+};
--
2.20.1
More information about the U-Boot
mailing list